Detect OLED or the original stock TFT touch assembly in ordinary V4.2/V4.3
images. Add saved live display.type auto/oled/tft/off selection and report
the active selection in board output. Keep sensors on primary I2C, preserve
shared power, and isolate TFT FSPI from radio HSPI through sleep and changes.
Consolidate future picker/build choices only with application capability
proof. Retain exact legacy OTA identities and separate R8 hardware images.
Document controls and physical qualification limits.
Validation: five serialized Full builds with capability/size/RAM checks;
focused host tests, existing R8/T-Deck/OLED regressions, build-profile suite,
and picker/provider tests. V4.3 OLED live changes and off/auto reboot
persistence passed on Mercerwood. Physical TFT qualification remains pending.
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.
Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.
Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
mikecarper
Kevin Le
Scott Powell
Quency-D
Marco
Quency-D
Wessel Nieboer
Scott Powell