Keep selected chats bound to full contact keys and route keyboard channel sends through the active transport. Deliver accepted plain, room and Meshtext messages to local history and notifications once; disarm rejected sends and retries.
Use shared live radio settings, GPS acquisition and power-saving policy, screen timers and red night palette. Report save failures, preserve verified custom preferences, and guard display controls and shutdown.
Add executable sanitizer regressions for routing, retries, selection, storage faults, UI lifecycle and GPS. Both Companion builds and the shared T-Deck regression pass; no physical Cardputer testing performed.
Repeated preamble/header activity can keep a requested primary or TempRadio
change busy indefinitely. Bound unfinished-RX admission for accepted LR2021
changes while preserving completed packets, TX, BUSY and exclusive owners.
Ordinary scans and CAD keep their existing admission rules. Expose the failing
stage and native status through get radio.apply.
Add saved radio.xtrim capacitor calibration and measured radio.freqerror in
signed Hz from the last valid LoRa packet. Preserve native trim by default,
restore explicit calibration after resets/Morse, verify saves before applying,
wait two seconds for the acknowledgement, and roll back failed changes.
Calibration motivation and prior upstream work:
https://github.com/meshcore-dev/MeshCore/issues/3365https://github.com/recrof/MeshCore/tree/lr2021-trim
Packet-status format follows Semtech's LR20xx driver and RadioLib staging.
Tests execute production activity/admission and transaction paths with noisy
RX, completion races, protected owners, failed setters, RX restart and save
rollback. Physical W12 retuning and RF calibration still require confirmation.
Detect OLED or the original stock TFT touch assembly in ordinary V4.2/V4.3
images. Add saved live display.type auto/oled/tft/off selection and report
the active selection in board output. Keep sensors on primary I2C, preserve
shared power, and isolate TFT FSPI from radio HSPI through sleep and changes.
Consolidate future picker/build choices only with application capability
proof. Retain exact legacy OTA identities and separate R8 hardware images.
Document controls and physical qualification limits.
Validation: five serialized Full builds with capability/size/RAM checks;
focused host tests, existing R8/T-Deck/OLED regressions, build-profile suite,
and picker/provider tests. V4.3 OLED live changes and off/auto reboot
persistence passed on Mercerwood. Physical TFT qualification remains pending.
Save valid busy RX, fast-switch and Companion tuple changes once, then
apply the latest accepted intent at a safe radio gap. Preserve checked-save
rollback, runtime RXEN intent, TempRadio ownership and exact remote reply
delivery. Repair failed preamble compensation without hiding uncertain saves.
Retry WebConfig, MQTT and NimBLE startup failures automatically. Preserve
explicit off choices, OTA ownership and the latest WiFi credentials through
cooperative shutdown. Add regression coverage and update command guides.
Validation: focused host transaction, rollback, ownership and lifecycle suites;
Full RAK4631, Heltec V4 R8 TFT and RC32 packages; representative room, sensor,
LR1110, LR2021, SX1276, STM32WL and ESP-NOW builds. Linked RAK crypto and OTA
workspace checks pass; its complete OTA image uses 712644/712704 bytes.
Default to one hour after sunset through sunrise, using fresh cached GPS or recent direct RF neighbor locations. Provide saved CLI and WebConfig controls with a small integer solar approximation and no additional framebuffer.
A settings save could reach the power setter while RX, TX, duty cycling or a
profile transition owned the radio, returning BAD_STATE after earlier settings
had already saved. Distinguish busy admission from a hardware rejection and
reuse the existing command route, storage and three-second deadline for power.
Acknowledge only after hardware acceptance and a successful preference save.
Skip hardware work for verified unchanged power. Invalidate that verification
after failed writes or radio initialization, retaining rollback and exclusive
beacon/Morse ownership. Keep the existing firmware memory limits and features.
Cover retries, captured routes, timeout/rollover, disconnect, partial writes,
failed saves and recovery. Keep ESP-NOW/simulation adapters compatible and add
ESP-NOW Companion compilation to the existing sequential smoke job.
Pull in https://github.com/mikecarper/MeshCore/pull/24.
Preserve reserved fallback bytes for single-profile operation and UDP ingress. Clarify the protocol documentation and validate both UDP-enabled and UDP-disabled builds of the receive-profile helper.
Validation: receive-profile tags, response bounds, UART sessions, UDP packet origins, and bridge ingress tests passed.
MeshCore Open TAK labels a MediaMesh photo or voice clip "Received via
MediaMesh", "via main mesh" or both. Wadamesh standalones tell the
app the profile in a frame byte stock firmware leaves reserved; a
Cascade companion left it unset, so the app showed nothing.
While radio2 is on (rx or rxtx):
- PUSH_CODE_RAW_DATA (0x84) byte 3: 0xA0 primary, 0xA1 radio2
(stock 0xFF).
- RESP_CODE_CHANNEL_DATA_RECV (0x1B) byte 2: the same (stock 0).
With radio2 off, or for a packet from the UDP bridge, the stock values
stay, so existing clients see no change.
Test: test/test_companion_rx_via.py (in run-unit-tests); the two
harnesses that compile these handlers get a stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011i5tJJtj95MB4oUgncCUe5
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.
Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
mikecarper
Claude
Kevin Le