Picks up upstream MeshCore 1.17.1.
Notable upstream content:
- 1.17.1 version/build-date bump in the example MyMesh headers.
- nRF52: combine radio entropy with CC310 RNG.
- Companion FEM prefs: load/save of fem_ properties commented out until they
can be set from the client.
- Scoped reply routing: replies no longer dropped when flood.max.unscoped is
low (RoutingPolicy + unit tests).
- nRF52 unused-pin sweep (T1, T-Echo Lite, MeshPocket).
No conflicts.
Brings in the external FEM gain preferences (fem_txgain, PR #3137 plus the
companion-side port), the AGC reset rxgain fix, the LR2021 preamble/IRQ
timeout logic, and assorted variant fixes (T096, T-Echo Card TCXO, promicro
pinmap, minewsemi, R1 Neo).
Conflict resolutions:
- SH1106Display: both sides fixed T-Beam Supreme startup independently. Kept
our _initialized guard and DISPLAY_ADDRESS_ALT override, took upstream's
SA0-pair fallback and its unconditional display.begin() so the frame buffer
is allocated even when no panel answers.
- MyMesh/SensorMesh/CommonCLI: took upstream's fem_txgain default and wiring,
kept our comments and the observer-side prefs layout.
Also fixes CustomLLCC68Wrapper, which upstream missed when sx126xResetAGC
gained its rx_boost_gain parameter. No variant builds that wrapper today, so
neither tree failed to compile.
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
Nine commits reducing the MQTT bridge's internal-DRAM footprint, plus four
fixes that rode with them (invalid path encodings, stale-JWT scan after a
clock correction, setup-retry interval measured from the failure, retried
setup consuming the reconnect allowance).
Touches no prefs surface -- nothing in NodePrefs, MQTTPrefs, or
ConfigSerializer -- so /prefs.json layout is unaffected and there is no
fleet config risk.
Soak evidence: every soak branch already contained this work in full. Device 1
has run it 69.6 h with 325,852 publishes, 0 errors and 0 reboots. The caveat
worth carrying: that long-duration evidence is all on the reduced-TLS
framework (OUT_CONTENT_LEN 4096). Device 3 is now soaking it on the stock
framework, which is where the allocation-ordering interaction with the full
16 KiB record buffers actually gets exercised.
Two findings from review, both real, both mine.
The CLI could read secrets the portal has never exposed. CommonCLI splits its
surface by CALLER, not by command: a serial caller (sender_timestamp 0, physical
access) reads secrets in plaintext, a remote one gets "******** (serial only)".
Its own comments say so — "Serial only (WiFi creds grant LAN access); remote
sees set/unset". execCommand passes 0, which is what makes `erase`, `stats-*`
and `set freq` reachable at all, and with it the terminal inherited the serial
console's plaintext answers for an HTTP request: `get prv.key` returned this
node's identity, `get wifi.pwd` the operator's network.
Worse in setup mode, which authenticates by proximity to an open AP — and `start
webconfig ap` can be run on an already-configured node, so the secrets are real
by then, not blank.
I had reasoned that the AP was the trust boundary either way because the wizard
can already rewrite these. That conflated two capabilities: replacing a WiFi
password does not reveal the current one, and replacing an identity does not
reveal the existing private key. /api/config has always masked these on read
(wcIsSecretKey); the CLI simply broke that rule. Now only the READ is masked —
the command surface stays whole — in CommonCLI's own words, keeping the
set/unset signal that is the useful part.
Onboarding could also skip the mandatory password. handleConfigPost refuses to
arm a reboot during initial setup without one; the CLI only warned in the
browser, which a pasted script or a direct POST ignores, so a node could reboot
onto the LAN still holding the factory credential. Same rule now applies at
POST. It is satisfied by a `password` command anywhere in the session rather
than only in the same request, so the natural two-step console flow still works
— the form batch always sends both together and never needed that memory.
wcIsSecretReadCommand lives in WebConfigKeys.h beside the rest of the secret
classification, pinned by three host tests: what must be masked, what must not,
and that only reads are touched. 17 keys + 24 batch tests pass; the audit checks
a masked read round-trips as masked.