Detect OLED or the original stock TFT touch assembly in ordinary V4.2/V4.3
images. Add saved live display.type auto/oled/tft/off selection and report
the active selection in board output. Keep sensors on primary I2C, preserve
shared power, and isolate TFT FSPI from radio HSPI through sleep and changes.
Consolidate future picker/build choices only with application capability
proof. Retain exact legacy OTA identities and separate R8 hardware images.
Document controls and physical qualification limits.
Validation: five serialized Full builds with capability/size/RAM checks;
focused host tests, existing R8/T-Deck/OLED regressions, build-profile suite,
and picker/provider tests. V4.3 OLED live changes and off/auto reboot
persistence passed on Mercerwood. Physical TFT qualification remains pending.
Temporarily disable incompatible cached side detectors while applying a temporary primary tuple, preserving their saved configuration for normal restoration. Use primary-only CAD while those detectors are suspended. Keep compatible temporary detectors and real hardware errors intact.
Report pending TempRadio starts instead of off, preserve live-tuple status during replacements and future schedules, and include the two-second delay in the accepted reply. Share primary validation to retain STM32 Mini flash capacity without dropping features.
Validated production CLI status, scheduler and persistence cases; LR2021 detector suspension, restoration, CAD and hardware-error paths; reply handoff, room/sensor recovery, Morse and OTA automation regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and runtime RAM admission with 436 bytes of flash remaining. Physical W12 RF testing remains unverified.
Persist set freq and set radio atomically, then apply through the existing safe radio scheduler without rebooting. Retain the old tuple until the delay and reply handoff finish, including queued room/sensor replies and TX-complete callbacks. End temporary sessions when accepting a permanent change.
Display applied RF settings even when radio2 is off. Share radio validation across immediate and scheduled setters to preserve STM32 Mini flash capacity. Update command documentation, regression coverage, and CI.
Validated production timing, persistence, display, CLI, fleet/reply, RX, sleep and Morse regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and RAM admission with 448 bytes of flash remaining. Physical W12 RF testing was not performed.
Save valid busy RX, fast-switch and Companion tuple changes once, then
apply the latest accepted intent at a safe radio gap. Preserve checked-save
rollback, runtime RXEN intent, TempRadio ownership and exact remote reply
delivery. Repair failed preamble compensation without hiding uncertain saves.
Retry WebConfig, MQTT and NimBLE startup failures automatically. Preserve
explicit off choices, OTA ownership and the latest WiFi credentials through
cooperative shutdown. Add regression coverage and update command guides.
Validation: focused host transaction, rollback, ownership and lifecycle suites;
Full RAK4631, Heltec V4 R8 TFT and RC32 packages; representative room, sensor,
LR1110, LR2021, SX1276, STM32WL and ESP-NOW builds. Linked RAK crypto and OTA
workspace checks pass; its complete OTA image uses 712644/712704 bytes.
Default to one hour after sunset through sunrise, using fresh cached GPS or recent direct RF neighbor locations. Provide saved CLI and WebConfig controls with a small integer solar approximation and no additional framebuffer.
A settings save could reach the power setter while RX, TX, duty cycling or a
profile transition owned the radio, returning BAD_STATE after earlier settings
had already saved. Distinguish busy admission from a hardware rejection and
reuse the existing command route, storage and three-second deadline for power.
Acknowledge only after hardware acceptance and a successful preference save.
Skip hardware work for verified unchanged power. Invalidate that verification
after failed writes or radio initialization, retaining rollback and exclusive
beacon/Morse ownership. Keep the existing firmware memory limits and features.
Cover retries, captured routes, timeout/rollover, disconnect, partial writes,
failed saves and recovery. Keep ESP-NOW/simulation adapters compatible and add
ESP-NOW Companion compilation to the existing sequential smoke job.
An enabled MQTT bridge without a saved SSID forced WebConfig back on at boot,
even after set webui off. Its setup AP also suspended an enabled ESP-NOW bridge.
Use first-time MQTT setup as the default only when no WebUI choice is saved.
Apply the saved on/off setting afterward in Repeater and Room Server. Preserve
first-time provisioning and explicit starts.
Add executable boot regressions for both roles with unset, on and off WebUI
settings and configured/unconfigured WiFi. Update setup and picker guidance.
The extracted inbox renderer was missing HomeScreen's pairing PIN visibility
state. Provide it and check that it agrees with the complete PIN on screen.
Reuse the text drawing result instead of measuring pairing values twice, and
keep the bottom pairing layout separate from the large home renderer. This
saves 32 bytes in the RAK4631 Full Companion and lets its OTA image pass the
existing application limit without removing features or weakening checks.
Fixes the two failures in unit-test run 40174991783.
Pull in https://github.com/mikecarper/MeshCore/pull/24.
Preserve reserved fallback bytes for single-profile operation and UDP ingress. Clarify the protocol documentation and validate both UDP-enabled and UDP-disabled builds of the receive-profile helper.
Validation: receive-profile tags, response bounds, UART sessions, UDP packet origins, and bridge ingress tests passed.
MeshCore Open TAK labels a MediaMesh photo or voice clip "Received via
MediaMesh", "via main mesh" or both. Wadamesh standalones tell the
app the profile in a frame byte stock firmware leaves reserved; a
Cascade companion left it unset, so the app showed nothing.
While radio2 is on (rx or rxtx):
- PUSH_CODE_RAW_DATA (0x84) byte 3: 0xA0 primary, 0xA1 radio2
(stock 0xFF).
- RESP_CODE_CHANNEL_DATA_RECV (0x1B) byte 2: the same (stock 0).
With radio2 off, or for a packet from the UDP bridge, the stock values
stay, so existing clients see no change.
Test: test/test_companion_rx_via.py (in run-unit-tests); the two
harnesses that compile these handlers get a stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011i5tJJtj95MB4oUgncCUe5
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.
Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
mikecarper
Claude