An enabled MQTT bridge without a saved SSID forced WebConfig back on at boot,
even after set webui off. Its setup AP also suspended an enabled ESP-NOW bridge.
Use first-time MQTT setup as the default only when no WebUI choice is saved.
Apply the saved on/off setting afterward in Repeater and Room Server. Preserve
first-time provisioning and explicit starts.
Add executable boot regressions for both roles with unset, on and off WebUI
settings and configured/unconfigured WiFi. Update setup and picker guidance.
The extracted inbox renderer was missing HomeScreen's pairing PIN visibility
state. Provide it and check that it agrees with the complete PIN on screen.
Reuse the text drawing result instead of measuring pairing values twice, and
keep the bottom pairing layout separate from the large home renderer. This
saves 32 bytes in the RAK4631 Full Companion and lets its OTA image pass the
existing application limit without removing features or weakening checks.
Fixes the two failures in unit-test run 40174991783.
Pull in https://github.com/mikecarper/MeshCore/pull/24.
Preserve reserved fallback bytes for single-profile operation and UDP ingress. Clarify the protocol documentation and validate both UDP-enabled and UDP-disabled builds of the receive-profile helper.
Validation: receive-profile tags, response bounds, UART sessions, UDP packet origins, and bridge ingress tests passed.
MeshCore Open TAK labels a MediaMesh photo or voice clip "Received via
MediaMesh", "via main mesh" or both. Wadamesh standalones tell the
app the profile in a frame byte stock firmware leaves reserved; a
Cascade companion left it unset, so the app showed nothing.
While radio2 is on (rx or rxtx):
- PUSH_CODE_RAW_DATA (0x84) byte 3: 0xA0 primary, 0xA1 radio2
(stock 0xFF).
- RESP_CODE_CHANNEL_DATA_RECV (0x1B) byte 2: the same (stock 0).
With radio2 off, or for a packet from the UDP bridge, the stock values
stay, so existing clients see no change.
Test: test/test_companion_rx_via.py (in run-unit-tests); the two
harnesses that compile these handlers get a stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011i5tJJtj95MB4oUgncCUe5
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.
Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
mikecarper
Claude
Kevin Le