An enabled MQTT bridge without a saved SSID forced WebConfig back on at boot,
even after set webui off. Its setup AP also suspended an enabled ESP-NOW bridge.
Use first-time MQTT setup as the default only when no WebUI choice is saved.
Apply the saved on/off setting afterward in Repeater and Room Server. Preserve
first-time provisioning and explicit starts.
Add executable boot regressions for both roles with unset, on and off WebUI
settings and configured/unconfigured WiFi. Update setup and picker guidance.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
Remove unrelated ecosystem comparisons and software citations while retaining hardware links, measured model names, and required license notices.
Preserve stock-peer runners and tests in a verified local validation package. Keep shared Companion USB transport in the firmware repository for the raw-radio sweep and OTA seeder, with focused CI coverage. Restore missing hosted documentation links.
Allow Auto, SSD1306 or SH1106 through display.controller on display-enabled RAK4631 and RAK3401 roles. Persist the choice before restart without changing the active screen policy, and let saved Auto override legacy build defaults.
Share checked settings I/O and the existing atomic writer to keep Full Companion within its flash boundary while retaining features and existing record formats. Cover save failures, backup recovery, startup selection and ambiguous OLED replies.
Validation: 35 targeted host tests passed. RAK4631 Full Companion and RAK3401 unified LoRa OTA repeater build and package checks passed with release-length version strings.
Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.
Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
Default fresh settings to sound off and vibration on, and keep existing saved choices. Apply changes immediately across all three UIs and make custom notification patterns respect the same mute controls.
Keep the Wio Mini Companion within its existing flash boundary by storing its LED switch in a reserved preference byte and shortening CLI help without removing commands. Add coverage for live output changes, persistence, and storage failures.
Adapted from https://github.com/meshcore-dev/MeshCore/pull/3603.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.
Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
mikecarper
Kevin Le