Commit Graph
1299 Commits
Author SHA1 Message Date
mikecarper f7b7edf393 Merge upstream dev 2026-07-17 16:17:16 -07:00
mikecarper db1dbf0432 Keep RXPS disabled in companion builds 2026-07-17 14:58:46 -07:00
mikecarper d070abd385 Fix FEM companion noise floor and PS builds 2026-07-17 13:51:07 -07:00
mikecarper 2c4e6da63b Add explicit Heltec companion FEM builds 2026-07-17 10:28:52 -07:00
ripplebiz 795989b918 Merge pull request #2966 from Quency-D/heltec-rc32
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
Florent 84d1e24338 nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate) 2026-07-17 07:36:39 -04:00
fdlamotte 3eb5451d3e Merge pull request #2906 from fdlamotte/shutdown_peripherals
Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-17 06:53:00 -04:00
Quency-D fd7b35f457 Move the rotation input to target.cpp 2026-07-17 15:50:25 +08:00
mikecarper 09c8aaba9c Add repeater flood filters and transport scopes 2026-07-17 00:35:51 -07:00
ripplebiz 41f4d6bd91 Merge pull request #2560 from Quency-D/heltec-v4-r8
Add heltec-v4-r8 board
2026-07-17 13:54:45 +10:00
Quency-D 61a8821d3c Optimize battery voltage reading 2026-07-16 17:45:00 +08:00
Quency-D a472cd7956 Delete duplicate pin definitions 2026-07-16 15:14:17 +08:00
mikecarper 5e030ce77b Fix full firmware matrix capacity failures 2026-07-15 22:40:09 -07:00
Quency-D 3469e92458 Enable patch reception 2026-07-16 11:37:12 +08:00
Wessel Nieboer f0259ee256 Add variant for SolarXiao that disables I2C RTC scan
Add to existing xiao_nrf52 variant instead of creating a new variant
2026-07-15 10:36:57 -07:00
lincomatic f5bf311862 add wehooper4 SolarXiao builds
remap I2C to prevent boot lock up

(cherry picked from commit 2253a38a54ef902e1740cbd92c91984af143e31f)

fix broken bridge solarxiao bridge build

(cherry picked from commit 27e5aac41c904923c17c390ed46c2d49558efa1a)

add wehooper4 SolarXiao builds
2026-07-15 10:36:29 -07:00
mikecarper 710790b81d Enable LoRa OTA for nRF52 repeaters 2026-07-15 09:49:40 -07:00
mikecarper 28afb0cd2c Exclude oversized RAK4631 repeater from LoRa OTA 2026-07-15 08:29:33 -07:00
Quency-D 05d4bd2f7f Add a rotary encoder 2026-07-15 17:45:24 +08:00
ripplebiz b55d69e57a Merge pull request #1983 from rgregg/rak-ethernet
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
mikecarper dce99fd5b3 Add WiFi MQTT companion setup portal 2026-07-15 00:27:20 -07:00
Quency-D 6c9f0907ee Merge pull request #17 from meshcore-dev/dev
merge Dev
2026-07-15 14:49:40 +08:00
liamcottle a99f4a0160 increase thinknode m7 max neighbours to 50 2026-07-15 16:05:37 +12:00
mikecarper 8599cf0acb Verify staged OTA payloads and flash writes 2026-07-14 14:42:26 -07:00
mikecarper a45c43f2b1 Add RX watchdog and fix repeater builds 2026-07-13 23:42:04 -07:00
Ryan Gregg 16b76bd35a Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Huw Duddy 64e8e24720 Merge pull request #2951 from meshcore-dev/fast-st7735-display
Fast ST7735 Display Driver
2026-07-14 16:01:14 +10:00
ripplebiz 05fdafbb2d Merge pull request #2898 from entr0p1/fix/lilygo-techo-lite-sx1262-ldo
Lilygo T-Echo Lite - Change SX1262 from DC-DC to LDO regulator
2026-07-14 14:53:44 +10:00
ripplebiz f4ed8c711b Merge pull request #2899 from entr0p1/fix/lilygo-techo-lite-nrf-dcdc
Lilygo T-Echo Lite - nRF52840 DC-DC
2026-07-14 14:52:56 +10:00
ripplebiz dc0f837451 Merge pull request #2905 from entr0p1/fix/heltec-t114-nrf-dcdc
Heltec T114 - nRF52840 DC-DC Regulator
2026-07-14 14:52:10 +10:00
mikecarper b9e7e416be Harden retry, region, radio, and alert logic 2026-07-13 13:18:49 -07:00
Scott Powell 1bdacb3247 * trying to get Heltec Tracker and Tracker V2 working 2026-07-13 23:27:50 +10:00
mikecarper da00a00436 Improve repeater reliability and build tooling 2026-07-13 01:03:27 -07:00
mikecarper 2b4aed4ef1 Merge branch 'dev' of github.com:meshcore-dev/MeshCore into keymindCascade
# Conflicts:
#	examples/simple_repeater/main.cpp
#	examples/simple_room_server/main.cpp
#	src/helpers/sensors/EnvironmentSensorManager.cpp
#	src/helpers/sensors/MicroNMEALocationProvider.h
2026-07-13 00:44:40 -07:00
liamcottle 87bf371cd3 initial support for thinknode m9 2026-07-13 19:07:09 +12:00
Liam Cottle 1c5a8426e8 Merge pull request #2839 from liamcottle/board/thinknode-m7
Add support for Elecrow ThinkNode M7
2026-07-13 15:06:17 +12:00
Liam Cottle e01a2565b9 Merge pull request #2936 from beala/beala/MeshTowerV2_feed_watchdog_2
Feed external hardware watchdog on Heltec Tower V2 (aka MeshTower V2) Implementation 2
2026-07-13 14:49:04 +12:00
Liam Cottle 55f43e52e2 Merge pull request #2935 from benskigomez/fix/m6-repeater-debug-flags
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
2026-07-13 12:55:13 +12:00
Jody Bentley 1429d75f57 ThinkNode M6/M1 room_server: set ROOM_PASSWORD default
Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
2026-07-12 18:32:09 -04:00
Alex Beal eb97a375d3 Add an instance of ExternalWatchdogManager to Tower V2 2026-07-12 16:17:23 -06:00
Jody Bentley 6343d8d96e ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
2026-07-12 17:54:14 -04:00
Alex Beal 47e1ce5bae Update #defines
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
2026-07-12 15:50:43 -06:00
Alex Beal 07b543176b Merge branch 'dev' into pr-1446 2026-07-12 15:44:28 -06:00
mikecarper 527aa16db5 Disable LoRa OTA on constrained bridge targets 2026-07-11 18:02:13 -07:00
mikecarper 4f8f36354e Restore Keymind features after LoRa OTA merge 2026-07-11 12:45:02 -07:00
mikecarper 4c0dbe707d Merge PR 2864 LoRa OTA into Keymind 2026-07-11 12:40:31 -07:00
Valentin Kivachuk Burda ee6e548746 variants: enable OTA on Heltec T096 (nRF52840, shared rak4631_hw recipe)
The T096 is an nRF52840 with the same S140 v6 SoftDevice and flash geometry as
the RAK4631, so it can reuse the shared rak4631_hw OTA recipe (ENABLE_OTA +
OtaFlashLayout_nrf52.h — APP_BASE 0x26000, staging ceiling 0xD4000, all
static_asserts satisfied by the stock nrf52840_s140_v6[_extrafs] ldscripts).

With the OTAFIX bootloader (oltaco PR #42 adds the T096 board) a node applies
in place; without it the node still discovers/relays/serves OTA and merely
fetch-refuses apply — so a T096 is a useful OTA relay/seeder regardless.

MOTA_HW_ID='"Heltec_t096"' tags the EndF trailer so a .mota built for other
hardware is refused. Propagates to every T096 role via ${Heltec_t096.*}.

Verified: repeater + companion_radio_usb build clean, 14 OTA objects each,
EndF stamped (hw='Heltec_t096', v1.17.0).
2026-07-11 14:42:12 +02:00
agessaman b88dc02b66 Merge mcarper/keymindCascade into mqtt-observer-plus
Integrates Mike Carper's transmission-reliability work (direct retries with
SNR-adaptive backoff and CR, flood retry controls, alt-path replies, flood
channel gates) plus its upstream/dev base (as of 2026-07-06) on top of the
observer stack. The flex branch is untouched; this branch is the experimental
integration line.

Conflict-resolution decisions, for future re-syncs (git rerere is enabled and
has recorded these):
- NodePrefs adopts keymind/upstream member order + retry/flood tail. Member
  order is in-memory only: /com_prefs stays field-by-field with the same
  canonical file order both sides already share through offset 294; keymind
  appends the retry tail at 295+ (new canonical size 676). Flex fleet files
  load unchanged; retry fields default via direct_retry_prefs_magic.
- loadPrefsInt keeps the fork's legacy MQTT-gap recovery but moves its
  detection boundary from 'extra > 5' to 'extra > LEGACY_MQTT_GAP_3SLOT (864)'
  so keymind-size tails take the normal read path. COM_PREFS_TAIL_BYTES
  retired.
- Dispatcher/RadioLibWrappers: fork watchdog additions + keymind TX overrides
  and CAD busy counter are unioned; RxReservePacketManager::queueOutbound
  follows upstream's new bool return (false when shedding).
- CommonCLI: fork observer dispatch + versioned /mqtt_prefs machinery kept;
  keymind CLI (retry/flood/radioat) taken; duplicate CAD/FEM handlers and
  sanitise lines deduped (kept keymind placements to minimize future diff).
- MyMesh (repeater/room): fork alerter/OTA/observer wiring kept; keymind
  scheduled-radio system replaces the old pending_* temp-radio members;
  applySavedRadioParams() replaces raw setParams at startup.
- ESP32Board: fork manifest-OTA + keymind powerOff/deepSleep and stopOTAUpdate
  unioned; startOTAUpdate keeps fork's STA-aware IP with keymind's idempotency
  guard.
- build.sh taken wholesale from keymind (fleet builds use GH Actions).

Verified: Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater,
heltec_v4_repeater_observer_mqtt, Heltec_v3_room_server_observer_mqtt build;
host migration harness (13 MQTT + non-MQTT scenarios) passes with updated
expectations (676-byte /com_prefs; odd-size files normalize on save, not
load); native unit tests 13/13.
2026-07-09 23:10:41 -07:00
agessaman b2e79d4735 fix(radio): drop companion FEM wiring; wire t096 + tracker_v2 FEM overrides
companion_radio has its own NodePrefs without radio_fem_rxgain (matching
upstream, which doesn't wire companion either), so the startup call added in
e905451d broke every companion build:
  MyMesh.cpp:973: error: 'struct NodePrefs' has no member named 'radio_fem_rxgain'
It went unnoticed behind the pre-existing companion build failures.

Also port upstream's FEM LNA overrides for heltec_t096 and heltec_tracker_v2
verbatim (board overrides + isLNAEnabled/const getters), so all three boards
upstream wires now match instead of reporting unsupported. Both variant files
compile; those targets still fail overall on the pre-existing non-observer
MQTT-source build-config issue (unchanged with this work stashed).
2026-07-09 12:25:23 -07:00
agessaman e905451dce feat(radio): drive LoRa FEM RX gain from radio_fem_rxgain (heltec_v4)
Completes the FEM RX-gain restoration begun in the CAD/prefs change, which
persisted radio_fem_rxgain but didn't yet drive the hardware. Also dropped
by the 22eb9b87 revert; restored to match upstream.

- MainBoard: setLoRaFemLnaEnabled()/canControlLoRaFemLna()/isLoRaFemLnaEnabled()
  virtuals (default: can't control — non-FEM boards report unsupported)
- heltec_v4: board overrides driving loRaFEMControl; LoRaFEMControl gains the
  isLNAEnabled() getter (it already tracked lna_enabled and drove the FEM)
- CLI: `set radio.fem.rxgain on/off` / `get radio.fem.rxgain` (guarded by
  canControlLoRaFemLna, so it reports "unsupported" on non-FEM boards)
- app startup applies the persisted pref: board.setLoRaFemLnaEnabled(
  _prefs.radio_fem_rxgain), beside setRxBoostedGainMode

Default is ON (upstream), so on FEM boards the LNA is enabled after upgrade —
a real reception behavior change to confirm on hardware. The other FEM
variants (heltec_t096/tower_v2/tracker_v2) need the same small board-override
addition; until then `radio.fem.rxgain` reports unsupported there (no
regression — status quo).

Builds: heltec_v4 repeater-observer + room-observer (FEM board), Heltec_v3
repeater (non-FEM, base virtuals no-op). NEEDS on-device validation on a
Heltec V4.
2026-07-09 11:20:07 -07:00