A settings save could reach the power setter while RX, TX, duty cycling or a
profile transition owned the radio, returning BAD_STATE after earlier settings
had already saved. Distinguish busy admission from a hardware rejection and
reuse the existing command route, storage and three-second deadline for power.
Acknowledge only after hardware acceptance and a successful preference save.
Skip hardware work for verified unchanged power. Invalidate that verification
after failed writes or radio initialization, retaining rollback and exclusive
beacon/Morse ownership. Keep the existing firmware memory limits and features.
Cover retries, captured routes, timeout/rollover, disconnect, partial writes,
failed saves and recovery. Keep ESP-NOW/simulation adapters compatible and add
ESP-NOW Companion compilation to the existing sequential smoke job.
Pull in https://github.com/mikecarper/MeshCore/pull/24.
Preserve reserved fallback bytes for single-profile operation and UDP ingress. Clarify the protocol documentation and validate both UDP-enabled and UDP-disabled builds of the receive-profile helper.
Validation: receive-profile tags, response bounds, UART sessions, UDP packet origins, and bridge ingress tests passed.
MeshCore Open TAK labels a MediaMesh photo or voice clip "Received via
MediaMesh", "via main mesh" or both. Wadamesh standalones tell the
app the profile in a frame byte stock firmware leaves reserved; a
Cascade companion left it unset, so the app showed nothing.
While radio2 is on (rx or rxtx):
- PUSH_CODE_RAW_DATA (0x84) byte 3: 0xA0 primary, 0xA1 radio2
(stock 0xFF).
- RESP_CODE_CHANNEL_DATA_RECV (0x1B) byte 2: the same (stock 0).
With radio2 off, or for a packet from the UDP bridge, the stock values
stay, so existing clients see no change.
Test: test/test_companion_rx_via.py (in run-unit-tests); the two
harnesses that compile these handlers get a stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011i5tJJtj95MB4oUgncCUe5
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.
Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
Allow Auto, SSD1306 or SH1106 through display.controller on display-enabled RAK4631 and RAK3401 roles. Persist the choice before restart without changing the active screen policy, and let saved Auto override legacy build defaults.
Share checked settings I/O and the existing atomic writer to keep Full Companion within its flash boundary while retaining features and existing record formats. Cover save failures, backup recovery, startup selection and ambiguous OLED replies.
Validation: 35 targeted host tests passed. RAK4631 Full Companion and RAK3401 unified LoRa OTA repeater build and package checks passed with release-length version strings.
Default fresh settings to sound off and vibration on, and keep existing saved choices. Apply changes immediately across all three UIs and make custom notification patterns respect the same mute controls.
Keep the Wio Mini Companion within its existing flash boundary by storing its LED switch in a reserved preference byte and shortening CLI help without removing commands. Add coverage for live output changes, persistence, and storage failures.
Adapted from https://github.com/meshcore-dev/MeshCore/pull/3603.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.
Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
Stage STM32 preference prefixes and checked footers in one atomic image, reject declared tails that encounter premature EOF, and share the typed CLI rollback helper. Use the proven Wio Mini code-layout flags on Wio E5 and Tiny Relay without changing features or memory boundaries. All four STM32 targets and RAK4631 Full pass at the full 1.18.0.1 release version length.
Deduplicate validation and preserve the published preference bytes and transactional saves. Correct Ikoka Handheld Companion flash bounds and document QSPI Room migration. Qualify STM32 and RAK4631 at the full 1.18.0.1 release version length.
Integrate fractional Companion timezones and conditional Bluetooth pages while preserving the existing preference byte layout, transactional saves, and Full transport selector. Add migration, rollback, invalid-value, and UI profile regressions.
Require a real raw-table save for same-value channel SETs. This repairs the false acknowledgement after successful constructor recovery of an older backup followed by a failed candidate write.
Keep resolved alias keys, raw AUTO policy and runtime generation untouched. Preserve GET and unchanged contact behavior, changed-policy validation and indeterminate-publication quarantine.
Cover real stale-backup creation, failure/retry, reboot and exact old-skip controls. Add actual alias/BaseChatMesh and raw app-key regression tests on all four backends. Verified 117 related host tests, 16 final caller rechecks, four firmware qualifications and linked nRF52 crypto checks.
Latch only channel storage on Indeterminate writer outcomes, including failed transaction setup. Preserve ordinary failure retries, confirmed rollback, contacts and the live accepted channel keys.
Exercise actual CLI and binary callers with all four storage backends, reboot behavior and exact missing-latch negative controls. Share TX storage failure diagnostics to retain the strict Wio-E5 Mini flash gate.
Verified 103 related host tests, four platform firmware qualifications and linked nRF52 crypto/stack checks. A separate stale-backup constructor/no-op acknowledgement case remains under audit.
mikecarper
Claude
Kevin Le
liamcottle