Bound OTA-over-LoRa duty cycle across repeaters with one runtime-tunable,
persisted limit (OtaManager::max_hops, `ota config hops <0..8>`, default 3):
- Accept-gate: a node ignores OTA that arrived from more than max_hops hops
away (neither processes nor relays it). 0 = direct only.
- Forward-cap: relay a flood only while still under max_hops, appending this
node's path-hash (hop count increments like the mesh flood routing).
- RAM guard: relay an OTA flood only while more than OTA_FWD_MIN_FREE packet-
pool slots stay free, so heavy OTA (best-effort, lowest-priority) can never
monopolise the shared pool and starve real traffic — a dropped relay is
re-requested by the source.
Persisted in NodePrefs (CommonCLI) and shown in `ota config`. Docs updated.
The discovery beacon previously re-announced at a random 3-10 min interval.
Replace that with a fixed, user-configurable cadence:
- OtaManager::advert_mins() — re-advertise every N minutes after the boot
burst; 0 disables periodic re-advertise (boot burst only). Default 24h.
- Persisted in NodePrefs (CommonCLI) and runtime-tunable: `ota config advert
<minutes>` (0..10080; 0 = off), and shown in `ota config`.
- When periodic advert is disabled, the scheduler still re-checks the config
on a slow timer, so a later `ota config advert <mins>` takes effect live.
Also advertise immediately whenever the served set changes — when a motatool
folder is attached to / detached from the ESP32 WiFi seeder — so peers learn
about newly-available firmware without waiting for the next interval (the
`ota folder` serial path already announced on attach).
Docs: protocol beacon-cadence note + user-guide `ota config advert`.
Refactored the handling of observer-related settings by moving them from
NodePrefs to a new MQTTPrefs structure. This change centralizes MQTT,
WiFi, timezone, SNMP, and alert configurations, improving code organization
and maintainability. The new structure allows for better separation of
concerns and prepares the codebase for future enhancements.
Refactored the CommonCLI class to separate observer-related command
handling into CommonCLI_Observer.cpp. This change improves code
organization and maintainability by isolating MQTT, WiFi, and other
observer-specific commands from the main CLI logic.
Implemented new commands for configuring and diagnosing NTP server
settings in the MQTT bridge. Users can now set a custom NTP server
and probe connectivity to configured servers. This enhancement
improves time synchronization reliability for JWT authentication
and provides better diagnostics for NTP connectivity issues.
Implemented functionality to generate and compare partition-table
signatures during OTA updates. This enhancement ensures that the
target build's partition layout matches the device's actual layout,
improving the reliability of OTA updates and preventing issues
related to partition changes.
Enhanced the firmware versioning system by appending a build number
suffix when available, allowing for better tracking of published builds.
This change improves the OTA update process by providing clearer
versioning information in the embedded firmware string.
Added support for deferred OTA updates in the MyMesh class, allowing
the system to schedule firmware updates to occur after a confirmation
reply is sent. This change improves the user experience by ensuring
that the update process does not block the main application loop,
allowing for smoother operation during firmware updates.
Added functionality to support pull-based OTA updates by fetching firmware
from a manifest. The new `otaFromManifest` method allows the system to
check for available updates and flash the firmware if necessary. This
enhancement improves the update process for observer builds using the
MQTT bridge, ensuring a more seamless firmware management experience.
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
- Introduced a new MQTT preset for INW Mesh with username/password authentication.
- Updated documentation to include the new preset and its configuration requirements.
- Enhanced credential handling in MQTTBridge to support dynamic username/password assignment for presets requiring per-slot credentials.
- Improved feedback in CLI for users to set credentials when needed.
- Introduced two new MQTT presets: `meshcore-ca-1` and `meshcore-ca-2`.
- Updated documentation to reflect compile-time configuration options for MQTT defaults, including slot presets, IATA, and timezone settings.
- Removed legacy default MQTT settings from the code, now relying on the new configuration approach.
Extract the inline cursor-walk in handleRegionCmd into file-local
helpers (skipSpaces, rtrimSpaces, takeToken, splitNameJump,
processRegionDefSegment), grouped immediately above the consumer.
Behavior is identical; addresses PR #2540 review feedback on
readability.
Tighten the region def docs: collapse five Note callouts into three
grouped paragraphs (Behavior / Existing regions / Limits), add a
case-sensitivity caveat plus an error example, note the cursor reset
between split commands, and use generic placeholder names.
Modified the alert PSK command handling to only respond when the sender timestamp is zero, ensuring that the PSK is processed exclusively from the serial command line. This change enhances security and clarity in the command processing logic.
Updated the alert PSK implementation to remove base64 support, now requiring a 32-character hex format for private channel secrets. Adjusted related CLI commands, error messages, and internal handling to ensure consistency with the new format. This change enhances clarity and aligns with the mobile app's "Share Channel" output. Relevant updates made across multiple files, including documentation and preference handling.
Enhanced the CLI command for setting the alert PSK to support both base64 (24/44 chars) and hex (32/64 chars) formats. This change allows for greater flexibility in key input, accommodating the mobile app's "share" output. Updated error messages for clarity and ensured that previously derived hashtags are cleared when a new PSK is set. Relevant adjustments made in CommonCLI and MQTT implementation documentation.
Add a new command `region bulk` for defining region hierarchies in a single line. This command allows users to create multiple regions in a single message. Updated the documentation to include usage examples and detailed parameter descriptions.
Updated the fault alert functionality to include an optional region name for scoping alert floods, allowing operators to override the default scope. Introduced a list of banned channels (e.g., Public PSK, `#test`, `#bot`) to prevent spamming community channels with alerts. The implementation ensures that alerts are only sent to private PSKs or non-banned hashtags. Relevant changes were made across multiple files, including updates to the CLI for setting and retrieving the new `alert.region` preference.
Implemented a new fault alert system that broadcasts notifications over LoRa when WiFi or MQTT connections are down for a specified duration. The alerts are configurable via CLI commands, allowing operators to set private PSKs or hashtags for alert channels. Default settings for alert thresholds and intervals are established, and the system ensures that alerts do not spam the public channel. Updated relevant files to integrate this feature into the MyMesh implementations and CLI handling.