Adam Gessaman
8b841d9cfd
Merge remote-tracking branch 'origin/dev' into mqtt-bridge-implementation
2026-02-09 09:50:44 -08:00
ripplebiz
3f33455b4d
Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
...
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
ripplebiz
248c3107b4
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
Liam Cottle
b1094c2842
Merge pull request #1616 from jbrazio/2026/raknorm
...
Refactor environment names and build flags for RAK variants
2026-02-09 01:33:26 +13:00
Thane Gill
31a2e74ada
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-07 17:05:51 -08:00
Liam Cottle
10eacc4e95
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
João Brázio
fcfbb458f8
Refactor environment names and build flags for RAK variants
2026-02-07 21:26:28 +00:00
ViezeVingertjes
5dcc377b77
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
bcb7a8067e
Merge pull request #1578 from recrof/m5stack-unit-c6l
...
initial port of M5Stack Unit C6L
2026-02-07 14:21:47 +11:00
ripplebiz
c1c9848569
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6502067368
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Adam Gessaman and Cursor
075552296a
Merge origin/dev into mqtt-bridge-implementation
...
Resolve conflict in variants/heltec_v4/platformio.ini by taking
origin/dev version for PA pin comments and SX126X_RX_BOOSTED_GAIN.
Co-authored-by: Cursor <cursoragent@cursor.com >
2026-02-05 09:55:37 -08:00
João Brázio
18473333df
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
5cb26b91f6
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
João Brázio
f0aa12faac
Merge remote-tracking branch 'pikolin/T114_sensors' into 2026/t114-sensors
2026-02-05 12:57:27 +00:00
ripplebiz
f7e92a7cd1
Merge pull request #1398 from Socalix/heltecv4-register1
...
Improve Heltec v4 RX reception with undocumented register patch
2026-02-05 19:14:18 +11:00
agessaman
abcfe60948
Add PSRAM diagnostics to MQTTBridge initialization
...
- Implemented PSRAM availability checks and logging to assist in debugging memory fragmentation on boards with external RAM.
- Enhanced logging to provide detailed information about PSRAM size, free memory, and initialization status.
- Updated platformio.ini files across multiple variants to remove obsolete mbedTLS configuration flags, streamlining the build process.
2026-02-04 18:59:19 -08:00
agessaman
21158e1fd2
Update platformio.ini files across multiple variants to enhance mbedTLS configuration
...
- Added new build flags for mbedTLS: CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN, CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN, and CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN.
- These changes improve the handling of SSL content lengths, optimizing performance for various hardware variants.
- Updated source filters to include MQTTBridge and MQTTMessageBuilder in relevant configurations.
2026-02-04 18:32:16 -08:00
Adam Gessaman
ccaaa534ff
Added MQTTBridge memory management and debugging capabilities
...
- Added memory debugging features to log heap usage and fragmentation recovery for MQTT clients.
- Introduced `recreateMqttClientsForFragmentationRecovery()` to manage MQTT client lifecycles and reduce memory fragmentation.
- Updated critical memory checks to log detailed heap statistics and active MQTT client counts.
- Included new debug logging for memory status every 60 seconds when memory debugging is enabled.
This update aims to improve stability and performance in memory-constrained environments.
2026-02-04 18:28:17 -08:00
agessaman
0fb570338f
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
Rastislav Vysoky
84e68cf4cb
initial port of M5Stack Unit C6L, update pioarduino to newer bugfix release
2026-02-02 22:58:55 +01:00
Quency-D
e15503d50d
Fix low power consumption issues
2026-02-02 14:19:42 +08:00
ripplebiz
ab994664ac
Merge pull request #1549 from Meshcore-Portugal/jbrazio/t114-fix
...
Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
2026-02-02 13:36:25 +11:00
Jan Pinkas
223930765c
Enable I2C sensors and EnvironmentSensorManager for Heltec T114
2026-02-01 09:05:03 +01:00
João Brázio
b5248faec4
Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
...
This reverts commit 616eb57b16 , reversing
changes made to 537acd7ea1 .
This patch needs to be reverted because it boot freezes t114 433Mhz variant.
2026-01-31 13:45:58 +00:00
taco
c5b1d30280
t114: remove extra DCDC enable
2026-01-31 23:48:28 +11:00
ripplebiz
cf7d95c6de
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
atoomnetmarc
b20e05bd8b
Add Heltec_T190_repeater_observer_mqtt environment
2026-01-29 20:35:23 +01:00
Adam Gessaman
37e51f3eb1
Merge branch 'dev' into mqtt-bridge-implementation
2026-01-29 08:58:58 -08:00
SoCalix
31fbb679d5
Merge branch 'dev' into heltecv4-register1
2026-01-29 09:12:35 -06:00
Rastislav Vysoky
2a321b53eb
renamed board files
2026-01-29 16:00:19 +01:00
Rastislav Vysoky
3a7ccc085d
fixed build errors and typos/inconsistencies
2026-01-29 15:32:51 +01:00
Steven Linn
a9a8299e14
Set LilyGO T-Beam 1W to use TX0 3.0V (within reference +2.85V~+3.15V)
2026-01-28 22:24:57 -07:00
Steven Linn
44e7c092c8
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
Steven Linn
f7e54ea797
Add LilyGO T-Beam 1W Support
2026-01-28 22:24:43 -07:00
Liam Cottle
629adc23c5
Merge pull request #1508 from recrof/rak4631-cleanup
...
cleanup: moved RAK4631 pindefs from board file to variant.h
2026-01-29 12:35:47 +13:00
Rastislav Vysoky
f41872420e
moved pindefs from board file to variant.h
2026-01-28 17:28:48 +01:00
Rastislav Vysoky
d5a73b2394
fix: build errors because of changes in NRF52 base class
2026-01-28 17:18:39 +01:00
agessaman
bb27cdedb6
Fix display header include for heltec_v4 when DISPLAY_CLASS is set directly
...
When DISPLAY_CLASS is defined via build flags but HELTEC_LORA_V4_OLED
or HELTEC_LORA_V4_TFT flags aren't set, include SSD1306Display.h as
fallback. This fixes compilation errors for environments like
heltec_v4_repeater_observer_mqtt that extend Heltec_lora32_v4 directly
and set DISPLAY_CLASS=SSD1306Display.
2026-01-27 12:52:09 -08:00
agessaman
d96c900f10
Merge upstream/dev into mqtt-bridge-implementation
...
Resolved conflict in variants/heltec_v4/platformio.ini by keeping
detailed comments and PIN_BOARD_SDA/SCL definitions from HEAD.
2026-01-27 12:50:30 -08:00
taco
4a83a6658a
build fix for meshtiny (nrf52board ota refactor)
2026-01-28 00:59:42 +11:00
fdlamotte
3f3978c7d3
Merge branch 'dev' into nrf-dcdc
2026-01-27 08:42:58 -04:00
ripplebiz
c0194d889a
Merge pull request #1492 from oltaco/meshtiny
...
Support for Meshtiny
2026-01-27 19:54:16 +11:00
agessaman
2a84e58b3a
Merge upstream/dev into mqtt-bridge-responsiveness-changes
...
Resolved conflicts in:
- examples/simple_repeater/MyMesh.cpp: kept analyzer/MQTT origin code, updated acl.load() signature
- examples/simple_room_server/MyMesh.cpp: kept MQTT bridge init, added acl parameter to _cli constructor
- src/helpers/CommonCLI.cpp: merged MQTT get commands with ADC/power management commands
2026-01-26 19:30:45 -08:00
taco
5a20e8674f
support for meshtiny
2026-01-27 14:15:02 +11:00
Quency-D
c7ac16f0e3
Add v4-tft code.
2026-01-26 13:48:15 +08:00
ripplebiz
a5f3766016
Merge pull request #1429 from Snayler/dev
...
Fix Serial and TX LED not working on Heltec Wireless Paper V1.2
2026-01-25 14:58:07 +11:00
ripplebiz
f0269c9bff
Merge pull request #1465 from recrof/rak3112-port
...
initial RAK 3112 support
2026-01-25 14:56:17 +11:00
Scott Powell
f46f0d0ed1
* WIO tracker l1: BLE companion. default node name now MAC address
2026-01-24 22:08:05 +11:00