Temporarily disable incompatible cached side detectors while applying a temporary primary tuple, preserving their saved configuration for normal restoration. Use primary-only CAD while those detectors are suspended. Keep compatible temporary detectors and real hardware errors intact.
Report pending TempRadio starts instead of off, preserve live-tuple status during replacements and future schedules, and include the two-second delay in the accepted reply. Share primary validation to retain STM32 Mini flash capacity without dropping features.
Validated production CLI status, scheduler and persistence cases; LR2021 detector suspension, restoration, CAD and hardware-error paths; reply handoff, room/sensor recovery, Morse and OTA automation regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and runtime RAM admission with 436 bytes of flash remaining. Physical W12 RF testing remains unverified.
Persist set freq and set radio atomically, then apply through the existing safe radio scheduler without rebooting. Retain the old tuple until the delay and reply handoff finish, including queued room/sensor replies and TX-complete callbacks. End temporary sessions when accepting a permanent change.
Display applied RF settings even when radio2 is off. Share radio validation across immediate and scheduled setters to preserve STM32 Mini flash capacity. Update command documentation, regression coverage, and CI.
Validated production timing, persistence, display, CLI, fleet/reply, RX, sleep and Morse regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and RAM admission with 448 bytes of flash remaining. Physical W12 RF testing was not performed.
Save valid busy RX, fast-switch and Companion tuple changes once, then
apply the latest accepted intent at a safe radio gap. Preserve checked-save
rollback, runtime RXEN intent, TempRadio ownership and exact remote reply
delivery. Repair failed preamble compensation without hiding uncertain saves.
Retry WebConfig, MQTT and NimBLE startup failures automatically. Preserve
explicit off choices, OTA ownership and the latest WiFi credentials through
cooperative shutdown. Add regression coverage and update command guides.
Validation: focused host transaction, rollback, ownership and lifecycle suites;
Full RAK4631, Heltec V4 R8 TFT and RC32 packages; representative room, sensor,
LR1110, LR2021, SX1276, STM32WL and ESP-NOW builds. Linked RAK crypto and OTA
workspace checks pass; its complete OTA image uses 712644/712704 bytes.
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.
Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
Enroll a private channel and publisher public key on repeaters and room servers. Local Companion fleet sends sign targeted or whole-fleet commands, with expiry, durable replay protection, and a restricted command allowlist. Preserve exact transmitted-reply barriers for secondary-radio changes, bound validation and replies, and qualify crypto, persistence, transport scope, role permissions, and compact-profile exclusions with regression tests.
Report the upload address and required network, honor AP switches on an existing uploader, and keep delayed WebConfig cleanup from disabling OTA WiFi. Preserve actionable startup errors and account for OTA in wireless state controls.
Exercise the production OTA lifecycle and stock website console, including power-saving idle sessions, in host regression tests.
The hostname was built once in begin() from the node name, so `set name` left
the node advertising its old name to DHCP until the next reflash. It is now
rebuilt on rename through a new CommonCLICallbacks::onNodeNameChanged() hook,
and begin() shares the same helper.
What this cannot do is rename a live lease. IDF 4.4 states that a hostname
changed after the interface is up "would only be reflected once the interface
restarts/reconnects", and Arduino 2.x's WiFi.setHostname() does not touch a
running netif at all — it writes a static string that the netif reads at
bring-up. Forcing the issue would mean bouncing the link, which costs every
MQTT slot a reconnect; that is not a reasonable price for a rename, so the new
name lands at the next reconnect or boot instead.
Only automatic (Ethernet-preferred) links carry a hostname today, exactly as
before. Giving plain Wi-Fi observers one would change the DHCP identity of the
existing fleet and is a separate decision.
Roll back failed password and advert changes, propagate identity-store results, and report unsaved common and observer settings. Correct observer filter persistence and KISS OTA capability claims. Add fault-injection and packaging regressions.
Recover usable ESP32 preferences and channels before permitting replacement; keep identity and ACL persistence transactional and complete.
Preserve MQTT commit boundaries, restore OTA identity and policy after deferred allocation, retain radio gain retries, and reject invalid flood limits. Add production-path fault regressions and CI coverage.
Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.
Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.
Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.
Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
Use RX-only radio recovery and feed the repeater reboot watchdog after MeshCore parsing. Default to 24 hours, apply temporary watchdog and advert intervals in RAM, and report temporary durations as days, hours, and minutes. Add regression coverage and an ESP-NOW bridge setup guide.
Accept the upstream empty-prefix neighbor.remove command after whitespace normalization while preserving invalid-key checks. Cover repeater and room-server removal paths with regression tests.
Fixes#8