Report the upload address and required network, honor AP switches on an existing uploader, and keep delayed WebConfig cleanup from disabling OTA WiFi. Preserve actionable startup errors and account for OTA in wireless state controls.
Exercise the production OTA lifecycle and stock website console, including power-saving idle sessions, in host regression tests.
The FEM commands moved out of CommonCLI into Board::handleCommand(), and
the T-Beam 1W fan control was added there too, but the portal never caught
up: `radio.fem.txgain` and the fan commands were missing from the terminal
table entirely, while `radio.fem.rxgain` was offered on every board even
though a board with no hook now answers "??:" rather than "unsupported".
Whether a node answers these is a property of the board, not of the build,
so the page cannot know from the firmware version. Ask the board instead:
probeBoardCommands() runs each candidate getter once on the loop task at
startup and keeps the ones that answer, which needs no per-variant list
because Board::handleCommand() already reports whether it handled a
command. /api/status names the survivors and the page hides everything
else, so adding a command to a variant means one entry in WC_BOARD_CMDS
rather than an edit per board.
The two FEM keys also become Radio-panel toggles, gated the same way;
their `set` reaches the board hook through the existing config batch, so
only the allowlist and /api/config needed to grow.
webconfig_cli_audit.py now scans variants/*/*Board.cpp for the boards that
actually build the portal, checks set-only keys in the reverse direction,
and verifies every gate is a command some board answers; the mock gained
--board-cmds so both shapes of board are testable. `stop ota` joins
NOT_OFFERED: `start ota` cannot run from the portal, so it has nothing to
stop.
Distinguish OTA read failures from missing blocks and select unique raw-flash checkpoints by MID and target. Keep deferred CLI requests and replies bound to immutable command identity and full authenticated keys.
Gate radio mutations on their exact reply delivery, recover coding-rate restoration, and roll back failed Companion preference writes. Preserve accepted low duty cycles across reboot.
Retain partial network writes, cancel displaced client operations, and reject malformed or stalled framed input. Add regression and CI coverage, and size-optimize the RAK4631 Ethernet build without dropping features.
Add get/set ota.speed and OTA CLI aliases for factors from 0.05 to 3,
defaulting to the existing pace. Persist the setting independently of the
OTA workspace and apply it to OTA packet pacing, relays, discovery and
adverts while retaining the configured airtime budget.
Preserve physical proof/retry allowances, account for both participating
radio profiles, keep optional deadlines armed across millis rollover, and
exclude intentional pacing from observer stale-packet age. Keep local
verification at its normal rate and retain a valid saved speed if backup
recovery cannot finish. Add documentation and CI regression coverage.
Validation: 1,491 native tests and 26 CLI/integration tests passed. Built
ESP32 full repeater, ESP32 full Companion, nRF52 full Companion and STM32
USB Companion successfully, including their memory/size checks.
Persist Companion TX preferences per contact and channel. Default repeater,
room, and sensor replies to both active TX profiles, with a reply-only force
option for an RX-only secondary profile. Track both reply copies before a
temporary-radio handoff and account for OTA copies under queue backpressure.
Add bridge/crossover filter modes and the third built-in wardriving filter,
plus compact filter CLI syntax, documentation, and CI coverage.
Fix quoted target names being interpreted as slot/key selectors, partial
recovery of invalid saved reply settings, filter suspension during tempradio2,
and unnecessary packet allocation while OTA traffic is throttled.
Validation: 1,477 native tests, 52 Python integration tests, 29 filter UI tests,
and five firmware builds covering ESP32, nRF52, and STM32 passed.
Add get bluetooth and set bluetooth on|off, with ble aliases. Require another
active management connection before disabling Bluetooth unless off has a
trailing force argument. Keep the toggle local to the current boot.
Drain Bluetooth replies before disconnecting and recheck the remaining
connection before applying a normal shutdown. Enabling Bluetooth cancels a
pending shutdown. Document the commands and add compiled regression coverage
to CI for native USB, HWCDC, UART, network clients, force, and timer rollover.
Validation: CLI, Bluetooth, and USB regression tests passed. XIAO ESP32-S3
and RAK4631 Full Companion builds passed RAM, flash, and capability checks.
Support fractional seconds, guard active packet work, keep the MCU awake, and restore reception after carrier tests. Include regression coverage and independent-radio RF validation for the V4 and T1000-E.
Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.
Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.
Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.
Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
Use RX-only radio recovery and feed the repeater reboot watchdog after MeshCore parsing. Default to 24 hours, apply temporary watchdog and advert intervals in RAM, and report temporary durations as days, hours, and minutes. Add regression coverage and an ESP-NOW bridge setup guide.
Default to retained history with a separate pending count, and add persistent display.inbox CLI modes for history, pending, and unread. Preserve browsing while clients are connected and show the active USB or Bluetooth connection.
Fixes#5
mikecarper
agessaman
Blake Latchford