Omit unbound forwarding-region callbacks only for exclusive Companion source roles. Reuse the compact neighbor sorter in repeaters for every RPC order and the CLI list, removing duplicate sort implementations while preserving storage and size gates.
Repeated preamble/header activity can keep a requested primary or TempRadio
change busy indefinitely. Bound unfinished-RX admission for accepted LR2021
changes while preserving completed packets, TX, BUSY and exclusive owners.
Ordinary scans and CAD keep their existing admission rules. Expose the failing
stage and native status through get radio.apply.
Add saved radio.xtrim capacitor calibration and measured radio.freqerror in
signed Hz from the last valid LoRa packet. Preserve native trim by default,
restore explicit calibration after resets/Morse, verify saves before applying,
wait two seconds for the acknowledgement, and roll back failed changes.
Calibration motivation and prior upstream work:
https://github.com/meshcore-dev/MeshCore/issues/3365https://github.com/recrof/MeshCore/tree/lr2021-trim
Packet-status format follows Semtech's LR20xx driver and RadioLib staging.
Tests execute production activity/admission and transaction paths with noisy
RX, completion races, protected owners, failed setters, RX restart and save
rollback. Physical W12 retuning and RF calibration still require confirmation.
Temporarily disable incompatible cached side detectors while applying a temporary primary tuple, preserving their saved configuration for normal restoration. Use primary-only CAD while those detectors are suspended. Keep compatible temporary detectors and real hardware errors intact.
Report pending TempRadio starts instead of off, preserve live-tuple status during replacements and future schedules, and include the two-second delay in the accepted reply. Share primary validation to retain STM32 Mini flash capacity without dropping features.
Validated production CLI status, scheduler and persistence cases; LR2021 detector suspension, restoration, CAD and hardware-error paths; reply handoff, room/sensor recovery, Morse and OTA automation regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and runtime RAM admission with 436 bytes of flash remaining. Physical W12 RF testing remains unverified.
Persist set freq and set radio atomically, then apply through the existing safe radio scheduler without rebooting. Retain the old tuple until the delay and reply handoff finish, including queued room/sensor replies and TX-complete callbacks. End temporary sessions when accepting a permanent change.
Display applied RF settings even when radio2 is off. Share radio validation across immediate and scheduled setters to preserve STM32 Mini flash capacity. Update command documentation, regression coverage, and CI.
Validated production timing, persistence, display, CLI, fleet/reply, RX, sleep and Morse regressions. W12 repeater, room-server and sensor builds pass. Canonical STM32 Mini Repeater passes flash and RAM admission with 448 bytes of flash remaining. Physical W12 RF testing was not performed.
Save valid busy RX, fast-switch and Companion tuple changes once, then
apply the latest accepted intent at a safe radio gap. Preserve checked-save
rollback, runtime RXEN intent, TempRadio ownership and exact remote reply
delivery. Repair failed preamble compensation without hiding uncertain saves.
Retry WebConfig, MQTT and NimBLE startup failures automatically. Preserve
explicit off choices, OTA ownership and the latest WiFi credentials through
cooperative shutdown. Add regression coverage and update command guides.
Validation: focused host transaction, rollback, ownership and lifecycle suites;
Full RAK4631, Heltec V4 R8 TFT and RC32 packages; representative room, sensor,
LR1110, LR2021, SX1276, STM32WL and ESP-NOW builds. Linked RAK crypto and OTA
workspace checks pass; its complete OTA image uses 712644/712704 bytes.
Default to one hour after sunset through sunrise, using fresh cached GPS or recent direct RF neighbor locations. Provide saved CLI and WebConfig controls with a small integer solar approximation and no additional framebuffer.
An enabled MQTT bridge without a saved SSID forced WebConfig back on at boot,
even after set webui off. Its setup AP also suspended an enabled ESP-NOW bridge.
Use first-time MQTT setup as the default only when no WebUI choice is saved.
Apply the saved on/off setting afterward in Repeater and Room Server. Preserve
first-time provisioning and explicit starts.
Add executable boot regressions for both roles with unset, on and off WebUI
settings and configured/unconfigured WiFi. Update setup and picker guidance.
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.
Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
Share nRF52 checked-record reads and command-family lookups without changing
storage formats, error protection, fleet authorization, or delegated scopes.
Use the existing bounded Merkle proof workspace for qualified ESP32 repeaters
while retaining source capacity, wire format, and every enabled feature.
Restore advert tab/CRLF delimiters and expose nested qualification build logs.
Validation: all 1932 native CI test cases; exact canonical RAK4631 Full,
Wio-E5 Mini, Station G3 Full MQTT, and Wireless Tracker Full wrappers;
linked RAK crypto/workspace checks and retained Reader code equivalence;
focused persistence, authorization, source-proof, and RAM policy regressions.
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.
Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
mikecarper
Kevin Le