Enhance the documentation for the `start ota` command to clarify its
behavior when connected to a Wi-Fi network versus when using the
`start ota ap` option. This provides users with better guidance on
how to initiate OTA updates under different network conditions.
Update commit logic to remove existing destination before renaming
the temporary file on ESP32. This change addresses the SPIFFS_ERR_CONFLICTING_NAME
issue, ensuring that the new preferences are published correctly.
Add tests to validate the new behavior and confirm that the
temporary file is handled appropriately.
Append mqtt_neighbors_enabled(u8) + mqtt_neighbors_interval(u32) to the
observer tail of MQTTPrefs. The layout is kept byte-identical to the flex
neighbors build: the enable flag lands in the old struct's zeroed trailing
padding (offset 2857) and the interval begins exactly at the former baseline
(2860), so sizeof grows 2860 -> 2864 (net +4 bytes). offsetof static_asserts
lock the layout so a mismatch fails the build.
The codec now accepts three v1 payload sizes: register 2860 as a
"pre-neighbors" Current payload so an in-lineage upgrade reads its existing
/mqtt_prefs and defaults the neighbors tail (off / 24h). Because 2864 is the
shared Current baseline, a /mqtt_prefs written by either the flex build or this
firmware is interchangeable.
Add the 12/24/336h interval constants, neighbors defaults, and a load-time
interval clamp that keeps persisted values inside the signed-delta millis()
scheduling window. Extend the host codec suite with a pre-neighbors migration
case and neighbors round-trip coverage.
Saving observer prefs logged an ESP32 error line on every save:
[E][vfs_api.cpp:182] remove(): /mqtt_prefs.tmp does not exists or is directory
MQTTPrefsFileStore::begin() cleared a stale transaction with an unconditional
remove("/mqtt_prefs.tmp"). On the normal path there is no stale tmp - commit()
renames it away - so the remove always failed and the ESP32 VFS layer logged it
at [E] level. The save itself succeeded; the noise just reads as a fault in the
serial log at exactly the moment an operator is watching a config change.
Guard each remove on exists(), at all four sites: begin() and abort() for both
the /mqtt_prefs and /com_prefs stores. Semantics are unchanged - a genuinely
stale tmp is still cleared, and a failure to clear it still aborts the
transaction - it just stops issuing a syscall that can only fail.
Fixed here on webconfig (the 1.16.0-based line that carries the atomic store)
so it flows to flex with the rest of that work. NOT applicable to
mqtt-bridge-implementation-flex today: flex has no .tmp/rename handling at all,
so the code path does not exist there.
Verified: Heltec_v3_repeater_observer_mqtt builds; hardware confirmation of the
silenced log pending.
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
Rework the /mqtt_prefs load/save path so preference migrations are
crash-safe and, for the first time, unit-testable on the host.
Most of this is extraction. The multi-format migration that previously
lived inline in CommonCLI.cpp (and could only run on-device) is moved
into three dependency-free headers so it can be exercised without
Arduino, a filesystem, or the radio stack:
- MQTTPrefsStorage.h frozen layout structs for every /mqtt_prefs
format ever shipped, with static_asserts that
fail the build if any on-flash offset changes.
- MQTTPrefsCodec.h pure format classification, field-copy
migration, and plausibility validation.
- MQTTPrefsAtomicStore.h transactional writer plus the power-cut
upgrade gate, both host-testable.
New behavior, beyond the refactor:
- Atomic writes: /mqtt_prefs is written to /mqtt_prefs.tmp, verified,
then published with an atomic rename; the writer never removes the
existing file. A failed or interrupted save leaves the current
config intact.
- Power-cut ordering: LegacyUpgradeGate guarantees /mqtt_prefs is
durably committed before the legacy /com_prefs (or /node_prefs)
carrying the observer tail is compacted or removed, so an
interrupted two-file upgrade retries on the next boot without
losing settings.
- Corrupt, unsupported-version, and newer-than-known files are
preserved and the device boots on in-RAM defaults, rather than
overwriting a file this firmware cannot fully decode.
- Headerless legacy formats are validated for plausibility before
they are trusted and rewritten (raw prefs carry no checksum).
The full historical format matrix is migrated forward to the versioned
v1 layout: pre-slot (including pre-wifi-power), 3-slot (base and
token/topic tails), and headerless 6-slot (base, audience, rx, ntp).
Scope note: only /mqtt_prefs and the one-time /node_prefs -> /com_prefs
name migration use the atomic path. Ordinary /com_prefs saves remain a
direct rewrite, unchanged by this commit.
Tests: adds two host GoogleTest suites (pio test -e native).
- test_mqtt_prefs_codec: format classification, migration fixtures,
v1 header integrity, downgrade preservation.
- test_mqtt_prefs_atomic_store: transactional writes, short-write
detection, begin/finish/rename failure cleanup, original-file
preservation.
Integrates Mike Carper's transmission-reliability work (direct retries with
SNR-adaptive backoff and CR, flood retry controls, alt-path replies, flood
channel gates) plus its upstream/dev base (as of 2026-07-06) on top of the
observer stack. The flex branch is untouched; this branch is the experimental
integration line.
Conflict-resolution decisions, for future re-syncs (git rerere is enabled and
has recorded these):
- NodePrefs adopts keymind/upstream member order + retry/flood tail. Member
order is in-memory only: /com_prefs stays field-by-field with the same
canonical file order both sides already share through offset 294; keymind
appends the retry tail at 295+ (new canonical size 676). Flex fleet files
load unchanged; retry fields default via direct_retry_prefs_magic.
- loadPrefsInt keeps the fork's legacy MQTT-gap recovery but moves its
detection boundary from 'extra > 5' to 'extra > LEGACY_MQTT_GAP_3SLOT (864)'
so keymind-size tails take the normal read path. COM_PREFS_TAIL_BYTES
retired.
- Dispatcher/RadioLibWrappers: fork watchdog additions + keymind TX overrides
and CAD busy counter are unioned; RxReservePacketManager::queueOutbound
follows upstream's new bool return (false when shedding).
- CommonCLI: fork observer dispatch + versioned /mqtt_prefs machinery kept;
keymind CLI (retry/flood/radioat) taken; duplicate CAD/FEM handlers and
sanitise lines deduped (kept keymind placements to minimize future diff).
- MyMesh (repeater/room): fork alerter/OTA/observer wiring kept; keymind
scheduled-radio system replaces the old pending_* temp-radio members;
applySavedRadioParams() replaces raw setParams at startup.
- ESP32Board: fork manifest-OTA + keymind powerOff/deepSleep and stopOTAUpdate
unioned; startOTAUpdate keeps fork's STA-aware IP with keymind's idempotency
guard.
- build.sh taken wholesale from keymind (fleet builds use GH Actions).
Verified: Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater,
heltec_v4_repeater_observer_mqtt, Heltec_v3_room_server_observer_mqtt build;
host migration harness (13 MQTT + non-MQTT scenarios) passes with updated
expectations (676-byte /com_prefs; odd-size files normalize on save, not
load); native unit tests 13/13.
mikecarper
Kevin Le
IoTThinks
agessaman
Jarosław Domański