Resolve conflict in heltec_tracker_v2/platformio.ini: keep
SX126X_REGISTER_PATCH=1 from upstream and retain GC1109 comment.
Co-authored-by: Cursor <cursoragent@cursor.com>
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Resolve conflict in variants/heltec_v4/platformio.ini by taking
origin/dev version for PA pin comments and SX126X_RX_BOOSTED_GAIN.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Implemented PSRAM availability checks and logging to assist in debugging memory fragmentation on boards with external RAM.
- Enhanced logging to provide detailed information about PSRAM size, free memory, and initialization status.
- Updated platformio.ini files across multiple variants to remove obsolete mbedTLS configuration flags, streamlining the build process.
- Added new build flags for mbedTLS: CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN, CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN, and CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN.
- These changes improve the handling of SSL content lengths, optimizing performance for various hardware variants.
- Updated source filters to include MQTTBridge and MQTTMessageBuilder in relevant configurations.
- Added memory debugging features to log heap usage and fragmentation recovery for MQTT clients.
- Introduced `recreateMqttClientsForFragmentationRecovery()` to manage MQTT client lifecycles and reduce memory fragmentation.
- Updated critical memory checks to log detailed heap statistics and active MQTT client counts.
- Included new debug logging for memory status every 60 seconds when memory debugging is enabled.
This update aims to improve stability and performance in memory-constrained environments.
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
When DISPLAY_CLASS is defined via build flags but HELTEC_LORA_V4_OLED
or HELTEC_LORA_V4_TFT flags aren't set, include SSD1306Display.h as
fallback. This fixes compilation errors for environments like
heltec_v4_repeater_observer_mqtt that extend Heltec_lora32_v4 directly
and set DISPLAY_CLASS=SSD1306Display.