Integrate PowerSaving-v17 through a27e78e4 (six new commits).
Use its 10-minute awake / 30-minute asleep companion GPS profile and
separate requested GPS state from receiver power in CLI diagnostics.
Include its nRF52 sensor debug-console settle delay and debug option.
Resolve overlapping GPS v2 changes using the current sensor callbacks,
which already implement live power-saving transitions, user-off control,
telemetry acquisition, wrap-safe sleep/wake timers and retained Airoha
RTC backup. Preserve preference persistence, telemetry cache/holds and
UART/shared-rail ownership safeguards across all four GPS drivers.
Add a compiled production GPS status regression test and run it in CI.
Validated 23 native GPS/power tests, preference and nRF52 pin contracts,
and firmware builds for T1000-E BLE Companion, MeshTracker X1 USB
Companion, Heltec Tracker Repeater, Mesh Solar Room and RAK4631 Sensor.
Add acknowledged SetFs and packet-cache shortcuts for SX1262, extend the LR1110 FS-mode fast path with buffered SPI, and keep the expander-backed Indicator on its previous path. Include HIL fixtures, validation notes, and regression tests.
Port the measured RXPS model without changing Cascade wire preambles or automatically enabling experimental levels. Use a spaced weighted median with bounded calibration windows, preserve packet ownership across CAD, and check actual SX126x receive mode before recovery.
Preserve Cascade sleep and radio fixes, integrate the new sensor and board profiles, and correct BSEC script inheritance and the MKE UART pin conflict. Native regressions, production-method/SPI harnesses, and ESP32, nRF52, and STM32 builds pass. Hardware comparison and fault-injection validation are recorded privately.
Switch these existing variants from `nrf52_base` to `rak4631_hw` (which adds
ENABLE_OTA + the in-place flash store + the EndF post-build hook), so they get
OTA-over-LoRa. Scope is limited to variants already covered by the
Adafruit_nRF52_Bootloader_OTAFIX in-place apply — no new variants are added.
OtaTargets.h is regenerated to include their target ids.
USE_LR1110 was missing from the preprocessor guard in CommonCLI.cpp,
causing both get and set to fail silently on T1000-E:
- get radio.rxgain returned the full radio config string (fell through
to the memcmp("radio", 5) branch)
- set radio.rxgain returned "unknown config" (no branch matched)
Fix: add -D USE_LR1110 to variants/t1000-e/platformio.ini and include
USE_LR1110 in the #if guard on both get and set branches.
CustomLR1110Wrapper already implements setRxBoostedGainMode() and
getRxBoostedGainMode() via the RadioLibWrapper virtual interface,
so no radio-layer changes are required.
Tested on T1000-E: get/set/persist all confirmed working.
mikecarper
Kevin Le
liamcottle
Scott Powell
Jarosław Domański
Valentin Kivachuk Burda
jirogit
Rastislav Vysoky
Robert Ekl
Scott Powell
Florent
taco
ViezeVingertjes
446564
seagull9000