Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
Add checked protocol adapters for every project LoRa family and enable Indicator LoRa TX. Preserve normal modem restoration, LR1110 fast hops, LR2021 side detectors and physical-band power limits.
Fix SX1276 beacon CAD completion dispatch, concrete-chip validation on multi-chip variants, no-GPS sensor hook linkage and STM32 file construction. Add fault, negative-control and preset coverage to CI. Keep flash-constrained STM32 artifacts disabled after measured opt-in overflows.
Reject truncated anonymous reply paths and advert metadata before copying,
while preserving timestamp-only empty-password logins. Limit room posting to
read-write/admin ACL roles, retain inbox frames until the requesting transport
accepts them, and lock raw LittleFS traversal against concurrent writes.
Separate ISR event generations from main-loop radio state. Confirm RX/TX IRQs,
detach concrete wrapper callbacks safely, and discard inconsistent LR2021 FIFO
snapshots before rearming. Preserve bridge RX frames through packet-pool
exhaustion and bound ESP-NOW retries and missing-callback recovery. Screen RTC
register layouts without losing DS1307 startup, and ignore poisoned future
contact timestamps during clock bootstrap.
Keep the nRF52 loop stack at 8 KiB while reducing the OTA listing call chain
from 7,832 to 6,056 static bytes. Retain all target names through lossless Full
Companion compression and the canonical size optimizer. Preserve constrained
STM32 filesystems and bind corrected ESP32 UART/OLED budgets to source size
assertions. Document the separately measured preexisting W12 package limits.
Adapted for this branch from meshcore-dev/MeshCore PRs #3521, #3340, #3362,
#2062, #3503, #3038, #3534, #3544 and #3512.
Validation: 1,829 native tests; sanitized parser, inbox, LittleFS, ACL, clock,
RTC, IRQ/FIFO and bridge fault tests; 332 additional Companion cases; real
RAK4631 Full and both repeater profiles, G2 Full/standard, V3 Full and both
constrained STM32 release recipes. Radio-family compile coverage continues
separately; W12 full/portable package guards remain enforced.
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com>
Co-authored-by: Andy Shinn <andys@andyshinn.as>
mikecarper
Ev Lbibass
