Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
Picks up upstream MeshCore 1.17.0 and the dev commits that followed it.
Notable upstream content:
- 1.17.0 version/build-date bump in the example MyMesh headers.
- anon_req hardening: reply_path_len is now uint8_t with an isValidPathLen()
bounds check and a 0xFF sentinel; reply_path_hash_size is gone.
- LR2021 support (Meshnology W12, Seeed MeshTracker X1) incl. side detectors,
multi-SF and the new `extra.sf` get/set CLI.
- CustomLFS 0.2.2 -> 0.2.3 (GD25Q64C support).
- kiss_modem envs for several nRF52 variants; ThinkNode M6 GPS/flash fixes.
Conflicts resolved:
- platformio.ini: took upstream's CustomLFS 0.2.3, kept our lib_ignore for
the vendored PsychicMqttClient.
- CommonCLI.h: kept both upstream's USE_LR2021 configSideDetectors() hook and
our fault-alert callbacks.
NodePrefs gains upstream's extra_sf[4], which is not registered with
ConfigSerializer, so /prefs.json layout is unchanged.
Verified: 275/275 native host tests pass; Heltec_v3_repeater_observer_mqtt,
Heltec_v3_repeater and heltec_v4_repeater_observer_mqtt all build.
Adding build_date to the WebConfigServer constructor broke every
*_room_server_observer_mqtt target: simple_room_server constructs the portal as
well, and only simple_repeater was updated. Nothing caught it because every
build run to that point had been a repeater target.
The full embedded string is v1.16.0.5-observer-beta-dev-a1b2c3d. The -observer
tag is on every observer build and the commit is for machines, so neither tells
a person anything at a glance. Both the page header and the console banner now
show base + published build number + channel, paired with the build date the
way `ver` pairs them:
v1.16.0.5-dev (6 Jun 2026)
v1.16.0.5 (6 Jun 2026)
`ver` still prints the whole string, commit included, for when that is what you
need. The channel suffix follows the release filenames rather than the embedded
tag — build.sh writes FILENAME_CHANNEL_TAG "-dev" for the same builds it tags
"-observer-beta-dev" internally, so "-dev" is the name these already carry.
Carrying the build date meant /api/status had to report it; WebConfigServer now
takes FIRMWARE_BUILD_DATE alongside FIRMWARE_VERSION, from the same defines
`ver` reads.
A local build has neither build number nor channel to show, so the fact worth
knowing about it moves to the second line: "local build, OTA not configured".
build.sh deliberately leaves OTA_MANIFEST_BASE undefined there, and a bare
version number gives no hint that the node cannot update itself.
Improve companion BLE delivery and idempotent remote CLI retries, make FPF7 persistence atomic with FPF6 migration, verify staged OTA data on resume, and clarify filter policy wildcard and BlackHole semantics.
mikecarper
agessaman
Jarosław Domański
Jarosław Domański
Kevin Le
Scott Powell
Hacuchino-hash
liamcottle
taco
ViezeVingertjes