Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
Reject truncated anonymous reply paths and advert metadata before copying,
while preserving timestamp-only empty-password logins. Limit room posting to
read-write/admin ACL roles, retain inbox frames until the requesting transport
accepts them, and lock raw LittleFS traversal against concurrent writes.
Separate ISR event generations from main-loop radio state. Confirm RX/TX IRQs,
detach concrete wrapper callbacks safely, and discard inconsistent LR2021 FIFO
snapshots before rearming. Preserve bridge RX frames through packet-pool
exhaustion and bound ESP-NOW retries and missing-callback recovery. Screen RTC
register layouts without losing DS1307 startup, and ignore poisoned future
contact timestamps during clock bootstrap.
Keep the nRF52 loop stack at 8 KiB while reducing the OTA listing call chain
from 7,832 to 6,056 static bytes. Retain all target names through lossless Full
Companion compression and the canonical size optimizer. Preserve constrained
STM32 filesystems and bind corrected ESP32 UART/OLED budgets to source size
assertions. Document the separately measured preexisting W12 package limits.
Adapted for this branch from meshcore-dev/MeshCore PRs #3521, #3340, #3362,
#2062, #3503, #3038, #3534, #3544 and #3512.
Validation: 1,829 native tests; sanitized parser, inbox, LittleFS, ACL, clock,
RTC, IRQ/FIFO and bridge fault tests; 332 additional Companion cases; real
RAK4631 Full and both repeater profiles, G2 Full/standard, V3 Full and both
constrained STM32 release recipes. Radio-family compile coverage continues
separately; W12 full/portable package guards remain enforced.
Enroll a private channel and publisher public key on repeaters and room servers. Local Companion fleet sends sign targeted or whole-fleet commands, with expiry, durable replay protection, and a restricted command allowlist. Preserve exact transmitted-reply barriers for secondary-radio changes, bound validation and replies, and qualify crypto, persistence, transport scope, role permissions, and compact-profile exclusions with regression tests.
Specialize repeater ACL session state, compact recent and flood records, stream Merkle proofs, and release cold OTA buffers safely. Preserve saved formats, stack sizes, table capacities, and OTA source limits. Account for lazy buffers when active and add compatibility, ARM alignment, allocation failure, and queued-response tests.
Validated six representative board/role builds, 1736 native test cases, sanitizer fixtures, and strict documentation. Document the preexisting Wio-E5 Mini flash overflow separately.
Report the upload address and required network, honor AP switches on an existing uploader, and keep delayed WebConfig cleanup from disabling OTA WiFi. Preserve actionable startup errors and account for OTA in wireless state controls.
Exercise the production OTA lifecycle and stock website console, including power-saving idle sessions, in host regression tests.
The hostname was built once in begin() from the node name, so `set name` left
the node advertising its old name to DHCP until the next reflash. It is now
rebuilt on rename through a new CommonCLICallbacks::onNodeNameChanged() hook,
and begin() shares the same helper.
What this cannot do is rename a live lease. IDF 4.4 states that a hostname
changed after the interface is up "would only be reflected once the interface
restarts/reconnects", and Arduino 2.x's WiFi.setHostname() does not touch a
running netif at all — it writes a static string that the netif reads at
bring-up. Forcing the issue would mean bouncing the link, which costs every
MQTT slot a reconnect; that is not a reasonable price for a rename, so the new
name lands at the next reconnect or boot instead.
Only automatic (Ethernet-preferred) links carry a hostname today, exactly as
before. Giving plain Wi-Fi observers one would change the DHCP identity of the
existing fleet and is a separate decision.
#54 lands first, so the network abstraction is reworked on top of the
per-slot client ownership model instead of alongside it.
Two resolutions are semantic, not textual:
- Link-transition teardown goes through the ownership API. It called
softDisconnect() on every started client, which bypassed client_state and
ignored the typed result. A slot that is still Starting now gets a real
stop: softDisconnect() returns immediately on a client that is not yet
connected, so its attempt would otherwise complete against the old route and
deliver a CONNECTED event indistinguishable from the new one's (F04). On a
medium switch the old route can still be briefly usable, so that is not
hypothetical. A connected client keeps the cheap bounded path, and a
quarantined one is left alone.
- NetworkLink::applyPowerPrefs() adopts WifiPowerSavePolicy. Its local
`2 ? MAX : NONE` mapping would have reintroduced F11 and read the new stored
value 3 (explicit `min`) as none. It also applies the setting when the link
starts already associated, which is the case the bridge used to cover.
The NTP probe from #54 keeps its validation and its one-attempt-per-server
bound, but resolves and gates on the selected link rather than on WiFi, so it
works on an Ethernet-preferred node.
setBridgeState(false) returned early when the bridge was already down,
so `set bridge.enabled off` after a timed-out restart left the resume
pending and MQTT restarted against the operator's choice once the task
acknowledged. Disabling now clears the pending resume before that early
return, and the resume also requires bridge_enabled. The StopUnproven
log and `get mqtt.status` no longer say only "reboot to recover", since
a late ack now recovers on its own.
Hardware (Heltec V4, 5 live slots, 1 s test stop deadline): a restart
went StopUnproven, the task acknowledged 27 s later and the bridge
resumed with all slots reconnecting; with `set bridge.enabled off` in
between it stayed stopped until `set bridge.enabled on`.
- A stop that timed out into StopUnproven refused begin(), and only a
later begin() honoured the task's late acknowledgement. Nothing called
it, so restartBridge() (any `set mqtt...` restart) or an aborted OTA left
the observer offline for the rest of the boot. MyMesh now records that a
start was refused and restarts the bridge once stopAcknowledgedLate()
reports the ack. The OTA-abort alert no longer claims "bridge resumed"
when the restart was refused.
- refreshNTP() now runs the validated probe with one attempt per server.
With two attempts and a 1 s pause it blocked the MQTT task ~18 s every
hour on networks that drop UDP/123, where the old async SNTP cost
nothing. Loop comment and docs updated to match.
The upstream `password` command saves /prefs.json without reporting the
result, and WebConfig overwrites its reply with "OK". If that write failed
while the later /mqtt.json write succeeded, wifi.setup_complete was set and
the factory password came back after reboot with first-run setup
suppressed. onInitialSetupComplete() now re-saves /prefs.json and records
completion only when it succeeds; otherwise the batch fails, setup stays
open, and no reboot is queued.
Roll back failed password and advert changes, propagate identity-store results, and report unsaved common and observer settings. Correct observer filter persistence and KISS OTA capability claims. Add fault-injection and packaging regressions.
Distinguish OTA read failures from missing blocks and select unique raw-flash checkpoints by MID and target. Keep deferred CLI requests and replies bound to immutable command identity and full authenticated keys.
Gate radio mutations on their exact reply delivery, recover coding-rate restoration, and roll back failed Companion preference writes. Preserve accepted low duty cycles across reboot.
Retain partial network writes, cancel displaced client operations, and reject malformed or stalled framed input. Add regression and CI coverage, and size-optimize the RAK4631 Ethernet build without dropping features.
Apply due radio2 settings by requested start time and expire every old temporary
window before starting its successor. Anchor temporary deadlines to command
acceptance so idle time before a command cannot shorten the new lease.
Keep failed radio2 saves in their original order and retry without rewriting
their scheduled timestamps. Give repeater persistence its own backoff and cache
the next actionable deadline, preventing repeated writes while allowing
temporary windows to start and expire on time.
Exercise all 24 slot insertion orders with punctual and delayed servicing, plus
adjacent windows, storage failures, command-time anchoring, and timer rollover.
Persist Companion TX preferences per contact and channel. Default repeater,
room, and sensor replies to both active TX profiles, with a reply-only force
option for an RX-only secondary profile. Track both reply copies before a
temporary-radio handoff and account for OTA copies under queue backpressure.
Add bridge/crossover filter modes and the third built-in wardriving filter,
plus compact filter CLI syntax, documentation, and CI coverage.
Fix quoted target names being interpreted as slot/key selectors, partial
recovery of invalid saved reply settings, filter suspension during tempradio2,
and unnecessary packet allocation while OTA traffic is throttled.
Validation: 1,477 native tests, 52 Python integration tests, 29 filter UI tests,
and five firmware builds covering ESP32, nRF52, and STM32 passed.
Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.
Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.
Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.
Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
Use RX-only radio recovery and feed the repeater reboot watchdog after MeshCore parsing. Default to 24 hours, apply temporary watchdog and advert intervals in RAM, and report temporary durations as days, hours, and minutes. Add regression coverage and an ESP-NOW bridge setup guide.
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.
Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.
Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
mikecarper
Scott Powell
agessaman