mikecarper
23c9648789
Share radio2 raw transport for Ethernet and negotiated direct LoRa OTA
2026-10-15 11:05:21 -07:00
mikecarper
368770656f
Fix WisBlock GPS power policy and preserve shared peripherals
2026-10-13 09:55:32 -07:00
mikecarper
8031e60b55
Add Companion lost-status replies and repair room mailbox test adapters
...
Save an opt-in off/no/yes answer to private Am I lost questions from known
chat contacts. Keep reply traffic and ACK state bounded, preserve pending
user delivery, and expose the setting through local CLI and ESP32 WebConfig.
Retain compact STM32 application/filesystem boundaries, qualify the Tag BLE
queue allowance, and exercise saved-image compatibility and browser controls.
Fix stale room mailbox protocol dependencies in the ACL/route test fixtures.
Validation: ten Companion builds, sanitized production-path regressions,
preference fault/compatibility tests, browser tests, and 86 capacity/build
recipe checks passed. No live radio was flashed for this feature.
2026-10-10 19:24:42 -07:00
mikecarper
eb80ebafbc
Support stock serial MQTT bridges on Full Companion
2026-10-04 14:14:53 -07:00
mikecarper
45e7c066ed
Copy only persisted Companion preference values during loading
2026-10-03 22:16:31 -07:00
mikecarper
24fcbf3247
Merge USB session safety and preserve GPS preference compatibility
2026-10-03 16:12:32 -07:00
mikecarper
d454250cab
Fix USB logging session safety and add hourly GPS sync interval
2026-10-03 15:43:35 -07:00
mikecarper
6febd15ded
Harden USB logging and persist watchdog events in management reports
2026-10-03 15:29:19 -07:00
mikecarper
4ca66c2ebb
Persist Companion Bluetooth on-off preference across reboots
2026-10-03 03:09:20 -07:00
mikecarper
eaf19c3638
Port consent-gated one-key DM queue to keymindCascade
2026-09-28 12:09:05 -07:00
mikecarper
49d4cc3f3e
Expose Companion flood retry controls and clarify T096 fixed TX PA
2026-09-26 10:31:54 -07:00
mikecarper
c31a0e5ed5
Merge upstream dev into keymindCascade
2026-09-24 00:51:07 -07:00
Blake Latchford
0c3fe356d0
Constrain agc.reset.interval and allow intervals > 255s
2026-09-21 12:26:36 -04:00
mikecarper
4139e7e24d
Merge meshcore-dev dev with companion and board integrations
2026-09-15 20:51:43 -07:00
Liam Cottle
1751783931
Merge pull request #3357 from skandragon/feat/picow-wifi-ble
...
Add WiFi to RPI PicoW (and perhaps others)
2026-09-09 21:55:22 +12:00
liamcottle
cee43752c7
add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd
2026-09-08 22:54:50 +12:00
liamcottle
6809fed159
simplify and remove 2 as a wifi enabled state
2026-09-08 21:30:17 +12:00
mikecarper
d28535f503
Add independent Companion Bluetooth stealth flag
...
Keep stealth separate from custom, saved-random and rotating MAC policies without migrating the development MAC mode. Persist authenticated peer state, guard advertising transitions and recovery, and expose the setting through the CLI and WebConfig.
Add regression and CI checks and record exact XIAO BLE pairing, reconnect, reboot and address-rotation hardware results.
2026-09-07 23:46:55 -07:00
mikecarper
8d72c3e3da
Add configurable Companion Bluetooth addresses
2026-09-07 18:29:00 -07:00
Michael Graff
7c2b4d88be
WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID
2026-09-06 22:18:00 -05:00
Michael Graff
dac171b49c
Default wifi.enabled to 0
2026-09-06 22:05:29 -05:00
Michael Graff
eb2ab10de0
Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank
2026-09-06 21:56:25 -05:00
ripplebiz
89ef200efa
Merge pull request #3366 from recrof/companion-cli-fix-2
...
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky
5d82ed352c
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-06 15:14:35 +02:00
Michael Graff
739a67c9f1
Allow WiFi credentials to be set at runtime
...
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Aleksei Mamlin
1d9a62ca4a
companion: get/set timezone offset for clock
...
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com >
2026-08-31 09:08:22 +03:00
mikecarper
c24bc82814
Merge upstream dev companion CLI updates
2026-08-28 17:31:28 -07:00
mikecarper
7676e4b1c2
feat: unify companion builds and USB runtime modes
2026-08-27 15:06:26 -07:00
mikecarper
e5fd77e53f
feat: add Bluetooth-controlled LoRa OTA
...
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
2026-08-27 01:22:18 -07:00
liamcottle
e3d0f9fcaa
fix cad cli command on companion
2026-08-27 19:05:18 +12:00
mikecarper
65e40ff05f
feat: add customizable companion Bluetooth names
2026-08-25 20:51:18 -07:00
Scott Powell
6dad3d5ab4
* companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented.
2026-08-24 20:44:17 +10:00
Scott Powell
845242f4aa
* prefs, custom dirty state
2026-08-24 17:22:15 +10:00
Scott Powell
5a162ff4c6
* new DynamicConfigSerializer
...
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
mikecarper
f2d4ffbb7e
Unify full firmware profiles and add dual USB logging
2026-08-23 19:22:45 -07:00
Scott Powell
47b0b7b3b8
* T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
...
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Scott Powell
b4f7e941fa
* CommonRadioPrefs refactors done
2026-08-23 17:30:30 +10:00
Scott Powell
41588d8052
* adding new CommonRadioPrefs
...
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
mikecarper
47993d178e
Update MeshCore features and OTA layout handling
2026-08-18 23:17:42 -07:00
mikecarper
ba14fa1c32
Enable Companion power saving by default
2026-08-16 21:06:23 -07:00
mikecarper
bd2e668961
Add T-Beam WiFi button toggle
2026-08-15 18:12:09 -07:00
mikecarper
843d309e2b
Fix Companion device power saving
2026-08-15 17:58:37 -07:00
mikecarper
b8d274c90e
Expose RX power saving in WebConfig
2026-08-15 09:07:41 -07:00
mikecarper
a04a284a3f
Merge remote-tracking branch 'review/observer-firmware' into keymindCascade
...
# Conflicts:
# .github/workflows/build-observer-firmwares.yml
# .gitignore
# MQTT_IMPLEMENTATION.md
# MQTT_INTERNALS.md
# README.md
# STABILITY_TESTABILITY_HANDOFF.md
# docs/cli_commands.md
# examples/companion_radio/MyMesh.cpp
# examples/simple_repeater/MyMesh.cpp
# examples/simple_repeater/UITask.cpp
# examples/simple_room_server/MyMesh.cpp
# examples/simple_room_server/UITask.cpp
# examples/simple_sensor/SensorMesh.cpp
# platformio.ini
# scripts/generate_webconfig_html.py
# scripts/webconfig_mock_server.py
# src/helpers/CommonCLI.cpp
# src/helpers/CommonCLI.h
# src/helpers/JWTHelper.cpp
# src/helpers/MQTTDefaults.h
# src/helpers/MQTTMessageBuilder.cpp
# src/helpers/MQTTPayloadBuilder.h
# src/helpers/MQTTPresets.h
# src/helpers/bridges/MQTTBridge.h
# src/helpers/esp32/WebConfigServer.cpp
# src/helpers/esp32/WebConfigServer.h
# src/helpers/ui/SH1106Display.cpp
# variants/lilygo_tbeam_SX1262/platformio.ini
# variants/lilygo_tbeam_SX1276/platformio.ini
# variants/lilygo_tlora_v2_1/platformio.ini
# variants/thinknode_m7/platformio.ini
# webui/index.html
2026-08-14 08:53:02 -07:00
Scott Powell
890a2e2cff
* commenting out the load/save of the fem_ properties, until they can be set
2026-08-14 16:30:12 +10:00
mikecarper
3cd9c84893
Fix Companion NodePrefs ODR conflict
2026-08-12 15:42:50 -07:00
ripplebiz
a4ab7f0e59
Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
...
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
mikecarper
ea3843e0b4
Merge branch 'PowerSaving-v17' of https://github.com/IoTThinks/MeshCore into keymindCascade
...
# Conflicts:
# examples/companion_radio/MyMesh.cpp
# examples/companion_radio/NodePrefs.h
# examples/simple_repeater/MyMesh.cpp
# examples/simple_room_server/MyMesh.cpp
# examples/simple_sensor/SensorMesh.cpp
# platformio.ini
# src/MeshCore.h
# src/helpers/CommonCLI.cpp
# src/helpers/CommonCLI.h
# src/helpers/radiolib/CustomSX1262Wrapper.h
# src/helpers/radiolib/CustomSX1268Wrapper.h
# src/helpers/radiolib/LR11x0Reset.h
# src/helpers/radiolib/SX126xReset.h
2026-08-11 13:28:43 -07:00
Kevin Le
7509e51e3d
Station G3: Expose, persist, and apply FEM gain preferences. https://github.com/meshcore-dev/MeshCore/pull/3137
2026-08-12 00:07:37 +07:00
agessaman
e2aa7b98f9
feat(companion_radio): add external FEM gain preferences for RX and TX for companions
...
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00