Commit Graph
88 Commits
Author SHA1 Message Date
mikecarper 21194b9825 Fix compile and capacity blockers in the full release matrix
Resolve Serial macro and ESP-NOW wrapper compilation errors. Preserve queue, neighbor, advert-history and Room post capacities while using qualified RTC, PSRAM and word-only IRAM storage on constrained ESP32 targets. Reduce Full infrastructure flash through lossless Room web compression, compact crypto and unused exception metadata removal.

Add focused native regressions for storage ownership, exact protocol output, OTA proofs and build policy. Keep physical flash sizes, OTA slots and RAM guard formulas unchanged.
2026-10-24 05:38:23 -07:00
mikecarper fd47fe0b1a Merge upstream dev into keymindCascade
Bring in the new Companion WiFi profiles while preserving existing OLED detection, message queues and OTA safeguards. Include dynamic WiFi helpers consistently and refresh the affected test fixtures.
2026-10-23 09:57:14 -07:00
mikecarper 36d9735e55 Resume UDP station ownership after WebConfig fallback 2026-10-22 13:59:12 -07:00
mikecarper 6e599d1709 Add ESP32 clock selection and bounded power test controls 2026-10-21 21:06:42 -07:00
mikecarper c4a1d485ff Add saved regulator modes and battery-gated crash recovery 2026-10-18 21:10:58 -07:00
mikecarper 9c78ccde57 Unify optional hardware variants and add runtime R8 TFT rotation 2026-10-18 20:25:13 -07:00
mikecarper 5d741318f5 Preserve admin password input and clarify reconnect guidance 2026-10-18 13:45:13 -07:00
mikecarper cd02e55824 Share the saved admin password across ESP32 management services
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.

Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
2026-10-18 13:09:48 -07:00
nullrouten0andClaude Opus 5.5 ef1e4a70cb Lock WebConfig logins per client address with a shared failure cap
/api/login locked every client for 30 s after five failures from anyone.
Anyone who could reach the login page could keep the owner locked out by
failing on purpose. If no login succeeded after a lockout, the lock also
returned from 2^31 to 2^32 ms (about 24.9 to 49.7 days) later, because the
deadline was never cleared and was compared as a signed difference.

Count failures per remote address instead. Five failures lock that address
for 30 s, as before. A shared budget caps failures from all addresses
together, so changing address does not add guesses: it holds six failures
and refills one every 6 s, the old global rate, so one failing address can
never empty it on its own. While it is empty every client waits, as before.
Lock times are measured as elapsed time.

The policy is a pure header, WebConfigLoginThrottle.h.
test_webconfig_login_throttle.py runs it directly (isolation, boundaries,
one-hour rate bounds, millis() half-wrap, saturation, eviction) and runs the
real handleLogin with ArduinoJson under ASan/UBSan. Putting every client on
one key, as the old code did, fails the handler test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 03:57:09 +00:00
mikecarper b5e493996c Merge observer firmware with persistent opt-in advert signature verification
Add Waveshare LR1121 observer recipes. Adapt observer advert verification to existing transactional CLI, append-only binary preferences and Companion NVS, preserving default file lengths and WiFi credentials. Reject oversized unsigned advert tails consistently with Mesh::onRecvPacket. Keep current BLE recovery and GPS claim accounting.
2026-10-15 13:45:27 -07:00
mikecarper 9363ad4f95 Add safe ESP32 WiFi compatibility controls and unified status 2026-10-15 11:04:07 -07:00
mikecarper 05a675a57a Suspend failed ESP32 MQTT and NTP uplinks for power saving
Share one bounded WiFi outage and recovery schedule across MQTT, automatic NTP, Companion station ownership and WebConfig. Preserve enabled settings and foreground access while allowing normal sleep after confirmed physical shutdown.

Honor failed SDK client stops before handing off WiFi, protect clean teardown and reconfiguration, and retry transient ESP-NOW channel restoration without repeated disconnects. Add production-method, SDK failure and real sleep regressions to CI.

Validation: native MQTT/NTP/clock/reconnect suites; production power and wrapper failure tests; browser, room HTTP, OTA and combined bridge regressions; Full Heltec V4 repeater, room and companion builds with capability, flash and linked-memory checks.
2026-10-12 14:57:01 -07:00
mikecarper 8031e60b55 Add Companion lost-status replies and repair room mailbox test adapters
Save an opt-in off/no/yes answer to private Am I lost questions from known
chat contacts. Keep reply traffic and ACK state bounded, preserve pending
user delivery, and expose the setting through local CLI and ESP32 WebConfig.

Retain compact STM32 application/filesystem boundaries, qualify the Tag BLE
queue allowance, and exercise saved-image compatibility and browser controls.
Fix stale room mailbox protocol dependencies in the ACL/route test fixtures.

Validation: ten Companion builds, sanitized production-path regressions,
preference fault/compatibility tests, browser tests, and 86 capacity/build
recipe checks passed. No live radio was flashed for this feature.
2026-10-10 19:24:42 -07:00
mikecarper 5fa06ea49b Harden recovery authentication and signed OTA admission 2026-10-10 01:25:08 -07:00
mikecarper 74bc91bf69 Improve room retention, moderation and local browser access
Add opt-in bounded chat history, persist explicit room ACL roles, enforce full-key bans and per-user quotas, and provide versioned information-board reads plus an ESP32 local room page. Preserve stored evidence on faults and withhold room delivery acknowledgments when a Companion cannot retain the message.

Exercise production handlers and filesystem fault recovery, pinned official-app JavaScript, real Chromium interactions, and representative ESP32, nRF52, RP2040 and STM32 builds. Add regression suites and bounded browser-workspace RAM reservations to CI.
2026-10-09 23:44:00 -07:00
agessaman 4716410bc2 feat(mqtt): add opt-in advert signature check before publishing
Received packets are uploaded before Mesh::onRecvPacket validates them, so
an advert corrupted over the air that still passes the LoRa CRC is published
with a mangled name or location. `set mqtt.advert.verify on` verifies each
received advert's Ed25519 signature (same message layout as Mesh.cpp,
including the 32-byte app-data clamp) and skips publishing failures.

Defaults off so collectors keep seeing RF corruption on the mesh. Dropped
adverts are counted as badsig= in `get mqtt.stats`. Exposed in the web
config Publishing card and persisted as mqtt.advert_verify in prefs JSON.
2026-10-07 20:07:36 -07:00
mikecarper 8c7d7d8839 Keep ESP32 access points compatible with LR transports
Protect standard access points from the shared ESP-IDF LR flag, defer incompatible raw ESP-NOW starts, and select RAM storage before LR writes. Track successful LR owners so setup and OTA access points reject a conflicting running transport before changing WiFi.

Run actual production policies, transport lifecycle methods, and WebConfig teardown branches against a shared-LR SDK model with runtime negative controls; include the regression in unit CI.
2026-10-07 02:07:06 -07:00
mikecarper d4b7217a4b Fix MQTT startup after ESP32 WebConfig provisioning 2026-10-06 19:28:10 -07:00
mikecarper d0859f925d Fix ESP32 Full idle radio teardown and compact AP startup 2026-10-06 11:46:10 -07:00
mikecarper 484008df19 Fix V4 setup AP startup and pre-AP network scans 2026-10-06 09:40:28 -07:00
mikecarper 526a3d1aa4 Retry saved WebConfig WiFi when the MQTT worker is absent 2026-10-05 22:10:36 -07:00
mikecarper 47135e081c Make ESP32 OTA startup handle WiFi and WebConfig automatically
Report the upload address and required network, honor AP switches on an existing uploader, and keep delayed WebConfig cleanup from disabling OTA WiFi. Preserve actionable startup errors and account for OTA in wireless state controls.

Exercise the production OTA lifecycle and stock website console, including power-saving idle sessions, in host regression tests.
2026-10-05 10:31:43 -07:00
mikecarper 6febd15ded Harden USB logging and persist watchdog events in management reports 2026-10-03 15:29:19 -07:00
mikecarper 02b8935794 Merge PR #13 with gzip-only WebConfig assets
Keep the graceful final-ACK TCP close and optional FEM control guards from
pixitha's browser compatibility fixes. Replace Brotli negotiation and duplicate
page assets with one gzip representation compressed by Google Zopfli 0.4.3
using 1,000 iterations. Compress the bootstrap, captive success, compact OTA,
and static WiFi setup pages with the same validated build cache.

Honor gzip quality values and wildcard precedence. Validate compressed OTA
page evidence in the firmware capability gate, and add native and Python
regressions plus CI coverage. Remove the unused Brotli build dependency.

Validation: 54 native tests, 56 Python/browser checks, full V4.3 build and
verified application flash. Actual V4 WiFi responses matched the generated
gzip assets; 30 repeat downloads completed without reboot. Chromium loaded
the setup and settings pages without script or transfer errors. Physical
Android testing is pending because the Pi detects no phone over USB or mDNS.
2026-09-30 18:55:17 -07:00
Kyle Duren 22aa62e7d6 Use gzip fallback for WebConfig clients 2026-09-30 17:07:59 -04:00
Kyle Duren 70d183a3ae Fix WebConfig browser compatibility 2026-09-30 16:58:36 -04:00
mikecarper 1e8ef78a2e Merge observer firmware branch into keymindCascade
Integrate compatible observer board, preset, WebConfig, display, CI, and policy updates. Preserve the checkout's newer MQTT binary preferences and WiFi bridge runtime where the forked implementations conflict. Keep ThinkNode observer networking WiFi-based until the Ethernet transport is wired into that runtime.
2026-09-24 01:20:56 -07:00
agessaman fdf299c3d0 fix(webconfig): publish the board probe safely and test the gap
Codex review of the previous commit found two real problems.

The routes go live in startLanMode()/startSetupMode(), one tick before
probeBoardCommands() first runs, so a status request can land in between.
That made _board_cmds a genuine cross-task race despite the comment
claiming otherwise, and — worse — let /api/status answer "no board
commands" before the board had been asked. The page reads status once,
so a browser that loaded in that window hid working FEM controls for the
whole session.

The probe result is now published and read under _mux, and /api/status
OMITS board_cmds until the probe has run, which is not the same as
reporting an empty list. The page treats the absent field as "not known
yet" and re-polls with backoff; the audit waits for it the same way,
rather than auditing a board it only half knows.

Probing from the start path instead would close the window, but
Callbacks::execCommand is documented as loop-task-only and `start
webconfig` is itself mid-handleCommand, so that trades a race for
re-entrancy.

The audit never executed fan.lo or fan.hi, which have no getter and so no
round-trip: they were only ever matched as strings. They now run for real,
including the four rejection paths, and the mock grew --probe-delay so the
retry path is exercised rather than assumed.
2026-09-19 21:08:54 -07:00
agessaman a1f3e2c3d3 feat(webconfig): let the portal discover board-specific CLI commands
The FEM commands moved out of CommonCLI into Board::handleCommand(), and
the T-Beam 1W fan control was added there too, but the portal never caught
up: `radio.fem.txgain` and the fan commands were missing from the terminal
table entirely, while `radio.fem.rxgain` was offered on every board even
though a board with no hook now answers "??:" rather than "unsupported".

Whether a node answers these is a property of the board, not of the build,
so the page cannot know from the firmware version. Ask the board instead:
probeBoardCommands() runs each candidate getter once on the loop task at
startup and keeps the ones that answer, which needs no per-variant list
because Board::handleCommand() already reports whether it handled a
command. /api/status names the survivors and the page hides everything
else, so adding a command to a variant means one entry in WC_BOARD_CMDS
rather than an edit per board.

The two FEM keys also become Radio-panel toggles, gated the same way;
their `set` reaches the board hook through the existing config batch, so
only the allowlist and /api/config needed to grow.

webconfig_cli_audit.py now scans variants/*/*Board.cpp for the boards that
actually build the portal, checks set-only keys in the reverse direction,
and verifies every gate is a command some board answers; the mock gained
--board-cmds so both shapes of board are testable. `stop ota` joins
NOT_OFFERED: `start ota` cannot run from the portal, so it has nothing to
stop.
2026-09-19 20:51:25 -07:00
agessaman 7f28231b25 Merge fix/mqtt-review-2026-09-09 into feat/abstract-networking
#54 lands first, so the network abstraction is reworked on top of the
per-slot client ownership model instead of alongside it.

Two resolutions are semantic, not textual:

- Link-transition teardown goes through the ownership API. It called
  softDisconnect() on every started client, which bypassed client_state and
  ignored the typed result. A slot that is still Starting now gets a real
  stop: softDisconnect() returns immediately on a client that is not yet
  connected, so its attempt would otherwise complete against the old route and
  deliver a CONNECTED event indistinguishable from the new one's (F04). On a
  medium switch the old route can still be briefly usable, so that is not
  hypothetical. A connected client keeps the cheap bounded path, and a
  quarantined one is left alone.

- NetworkLink::applyPowerPrefs() adopts WifiPowerSavePolicy. Its local
  `2 ? MAX : NONE` mapping would have reintroduced F11 and read the new stored
  value 3 (explicit `min`) as none. It also applies the setting when the link
  starts already associated, which is the case the bridge used to cover.

The NTP probe from #54 keeps its validation and its one-attempt-per-server
bound, but resolves and gates on the selected link rather than on WiFi, so it
works on an Ethernet-preferred node.
2026-09-19 15:15:07 -07:00
agessaman 44c46ab67f fix(webconfig): read the LAN address after pinning the route
startLanMode() took the caller's IP, read before the route lock. A
Wi-Fi/Ethernet switch in between left WebConfig locked to the new link
while advertising the old link's address. It now reads the selected
link's address after lockSwitching(), as startOTAUpdate() already does.
2026-09-19 10:53:39 -07:00
agessaman a129420804 fix(network): pre-merge review fixes
- Guard the boot-time link bootstrap to observer ESP32 builds. It ran
  unconditionally in MyMesh::begin(), breaking every non-observer
  repeater/room server build (ESP32 and nRF52).
- Rename NetworkInterface -> NetworkLink (class, accessor, files).
  Arduino-ESP32 3.x ships its own NetworkInterface class and header,
  which broke the ESP32-C6 builds. Drop WiFi.setAutoConnect(), a no-op
  on 2.x and removed in 3.x.
- Refresh stored Wi-Fi credentials every bridge tick so the STA
  reconnect loop picks up `set wifi.ssid` / `set wifi.pwd` without a
  reboot, as the bridge did before the link moved out of it. Skip
  reconnects while the SSID is empty.
- Restore the "WiFi connected: <ip>" / "WiFi disconnected: reason N"
  debug lines the bridge used to print.
- Alert on Ethernet only once it has held a lease this boot or when no
  Wi-Fi is configured; Wi-Fi-only installs of an Ethernet-preferred
  image keep Wi-Fi alerts instead of reporting "Ethernet down".
- Record wifi.setup_complete only for Ethernet LAN onboarding, so
  Wi-Fi builds keep the SSID-based first-boot portal rule.
- Use seq_cst for the route-switch lock/mutation flag handshake.
- Docs: SNMP RSSI sentinel is -127; describe link-return vs medium-switch
  reconnect behavior accurately; note runtime credential pickup.
- Test: unknown keys inside a known /mqtt.json group are ignored, which
  keeps wifi.setup_complete downgrade-safe.
2026-09-19 10:14:16 -07:00
mikecarper 8d8c7e5885 Use Brotli and Zopfli for compressed assets 2026-09-18 12:37:46 -07:00
mikecarper e9a2326c4f Add WiFi, ESP-NOW and combined wireless CLI controls 2026-09-15 00:01:45 -07:00
mikecarper 96ef0ae905 Add configurable battery and USB display behavior
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.

Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
2026-09-10 21:03:15 -07:00
agessaman a868c8eeb3 fix(wifi): one power-save mapping for CLI, startup and reconnect
`set wifi.powersave min` stored 0 and applied WIFI_PS_MIN_MODEM, but the
bridge's post-reconnect mapping read the same 0 as WIFI_PS_NONE. A node
explicitly configured for minimum modem sleep therefore ran with power save off
after its first reconnect, while `get wifi.powersave` still reported min. The
stored default is already 1 (`none`), so nothing here changes the product
default — it stops an operator's explicit choice from being reinterpreted.

Move the value/name/mode table into WifiPowerSavePolicy (pure, host-tested) and
use it from the CLI setter and getter, the web config snapshot and the bridge.
The bridge now also applies the mode when it finds the STA already associated at
start — that path has no connect transition to carry the setting, so a bridge
restart used to leave whatever mode was set before.
2026-09-09 14:44:14 -07:00
mikecarper 06c51fdef5 Allow local CLI maintenance across direct connections 2026-09-08 21:44:57 -07:00
mikecarper c946adadfe Share the Companion terminal with the WiFi console 2026-09-08 19:48:15 -07:00
mikecarper 6fbc6bed19 Preserve MQTT settings across slot changes 2026-09-08 18:55:00 -07:00
mikecarper 4c8aad5b16 Unify device controls and restore the WiFi console 2026-09-08 18:36:23 -07:00
mikecarper d28535f503 Add independent Companion Bluetooth stealth flag
Keep stealth separate from custom, saved-random and rotating MAC policies without migrating the development MAC mode. Persist authenticated peer state, guard advertising transitions and recovery, and expose the setting through the CLI and WebConfig.

Add regression and CI checks and record exact XIAO BLE pairing, reconnect, reboot and address-rotation hardware results.
2026-09-07 23:46:55 -07:00
mikecarper 8d72c3e3da Add configurable Companion Bluetooth addresses 2026-09-07 18:29:00 -07:00
agessaman a0188bd174 fix(network): harden Ethernet-preferred lifecycle 2026-09-04 08:42:46 -07:00
agessaman d9db3e8e6a fix(network): harden automatic link transitions 2026-09-03 20:47:11 -07:00
mikecarper cb27fa8539 Fix nRF52 contact persistence and ExtraFS recovery 2026-09-02 11:41:38 -07:00
mikecarper 4d89de8544 Improve companion setup and USB session recovery 2026-09-02 03:44:28 -07:00
agessaman 366b086713 feat: add automatic network failover 2026-09-01 21:18:22 -07:00
mikecarper 5de1820765 Unify companion BLE and WiFi setup flows 2026-09-01 01:25:00 -07:00
mikecarper ec94ac44ae Add Indicator WiFi setup as eighth home page 2026-08-31 17:31:48 -07:00
mikecarper 5af7b73ff9 Add safe ESP32 transports and Indicator UI
Reserve board-specific GPIOs, make ESP-NOW channel/format handling configurable, and coordinate WiFi, BLE, NTP, MQTT, and host actions safely.

Add the Indicator message page, exclusive transport selector, dynamic 480/320 rendering, larger transport typography, pairing cleanup, and corresponding tests and documentation.
2026-08-31 14:29:42 -07:00