Classic ESP32 links into a dram0_0_seg of only 124,580 bytes: memory.ld
carves the BT controller's 0xdb5c (56,156) reservation off the 0x2c200
window before the application gets any. Three large objects dominated what
was left, and Tbeam_SX1262_repeater_observer_mqtt overran the build's 8 KiB
static reserve by 4,744 bytes.
Heap-allocate them instead, each with a defined behaviour when the
allocation fails:
- OtaContext: generalize the Companion's borrowed-storage path behind
OTA_DYNAMIC_CONTEXT and add OTA_HEAP_CONTEXT, which allocates the context
on first use and frees it once no transfer, apply or folder link needs it.
A repeater is idle nearly all the time, so the workspace is usually absent.
Exhaustion is reported to the caller and the operation declines.
- ClientACL: the client table becomes a pointer with a live capacity;
capacity 0 refuses new clients rather than writing through a null table.
- MyMesh flood packet filters: likewise, with flood_packet_filter_slots as
the live bound for every rule loop. At capacity 0 the node forwards
unfiltered, and both save paths refuse to write so a stored ruleset is
never replaced by an empty file.
Also override the Arduino SDK's weak btInUse() in simple_repeater so
initArduino() releases the BT controller memory to the heap. That grows the
runtime heap these tables now come from; it cannot recover the same
reservation from the linker's static window.
Static DRAM, classic ESP32:
Heltec_v2_repeater 108,332 -> 70,732
Tbeam_SX1262_repeater_observer_mqtt 121,132 -> 83,532 (was failing)
Bind Companion replies to request transports, make dual-CDC USB sessions nonblocking and reconnect-safe, and harden nRF52 watchdog/OTA storage paths. Fix T096 button debounce, display wake, sleep races, and the compact message layout; add exact WisBlock OTA profiles plus expanded native/static/HIL documentation.
Reserve board-specific GPIOs, make ESP-NOW channel/format handling configurable, and coordinate WiFi, BLE, NTP, MQTT, and host actions safely.
Add the Indicator message page, exclusive transport selector, dynamic 480/320 rendering, larger transport typography, pairing cleanup, and corresponding tests and documentation.
Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
Add selectable shared ESP-NOW channels, raw/wrapped bridge compatibility, and bounded fragmentation for maximum-size packets.\n\nGive ESP32 Full profiles WiFi coexistence, stabilize WebConfig and USB terminal lifecycles, and keep disabled bridges stopped during observer updates.\n\nUpdate generated UI, firmware selection, documentation, and regression coverage.
Adapt the validated fan thermostat, battery ADC calibration, GPS baud, SX1262 register patch, and 1700us PA ramp behavior from mintylinux/Meshcore-T-beam-1W-Firmware to the current board architecture. Also make Arduino 3 full-build dependency switching reliable after standard ESP32 builds and guard the release hardware contract with regression coverage.
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
Expose the Full Companion terminal over TCP and add an authenticated, replay-resistant host command service with documented CPU temperature, reboot, and allowlisted program examples.\n\nImprove LoRa OTA diagnostics and persistent CLI handling, reduce clock correction drift to ten minutes, and make mOTA stream flush behavior an explicit transport policy with regression coverage.
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.
This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).
Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
Picks up upstream MeshCore 1.17.1.
Notable upstream content:
- 1.17.1 version/build-date bump in the example MyMesh headers.
- nRF52: combine radio entropy with CC310 RNG.
- Companion FEM prefs: load/save of fem_ properties commented out until they
can be set from the client.
- Scoped reply routing: replies no longer dropped when flood.max.unscoped is
low (RoutingPolicy + unit tests).
- nRF52 unused-pin sweep (T1, T-Echo Lite, MeshPocket).
No conflicts.
MUSTARDTIGERFPV
mikecarper
Scott Powell
Rastislav Vysoky
entr0p1
agessaman