Commit Graph
1068 Commits
Author SHA1 Message Date
agessaman 0b05aedecd feat(platformio): enable PSRAM support for TBeam Supreme SX1262 variant 2026-04-28 08:00:28 -07:00
agessaman 0a4f002fef feat(platformio): add new MQTT observer configurations for Heltec V4 expansion kit
Introduced two new environments in platformio.ini for the Heltec V4 expansion kit: `heltec_v4_expansionkit_repeater_observer_mqtt` and `heltec_v4_expansionkit_room_server_observer_mqtt`. Each environment includes specific build flags, dependencies, and source filters tailored for MQTT functionality, enhancing the project's capabilities for IoT applications.
2026-04-24 21:49:29 -07:00
agessaman 0d28025740 refactor(heltec_tracker_v2): align FEM with meshcore-dev KCT8103L
Match upstream pin map (KCT8103L CSD/CTX, I2C 6/17, LORA_TX_POWER=9) and restore meshcore LoRaFEMControl.cpp and HeltecTrackerV2Board.cpp. Run ESP32 at 240MHz for MQTT/WiFi bridge headroom. Sensor env drops fork-only ENV_PIN overrides to match upstream.

Made-with: Cursor
2026-04-24 10:39:48 -07:00
agessaman 255fce7f65 feat(heltec_tracker_v2): restore LoRaFEMControl for GC1109
Upstream adds LoRaFEMControl for a KCT8103L pinout; this variant uses GC1109 (P_LORA_PA_*). Reintroduce the class with the same API and wire HeltecTrackerV2Board through it so FEM logic matches platformio.ini.

Made-with: Cursor
2026-04-24 10:32:14 -07:00
agessaman c1989d6fda Merge remote-tracking branch 'upstream/dev' into mqtt-bridge-implementation-flex
Resolve heltec_tracker_v2 LoRaFEMControl modify/delete by keeping inlined FEM logic in HeltecTrackerV2Board.

Made-with: Cursor
2026-04-24 10:20:52 -07:00
Liam Cottle 9a1be5386d Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
agessaman 70722a5873 fix(mqtt): restore legacy outbox behavior for QoS0 async publishes
Update the PsychicMqttClient to ensure that QoS0 messages are enqueued with durable outbox storage. This change addresses issues with false-failure semantics in certain connected paths, improving message flow reliability. Additionally, modify platformio.ini to include SSL certificate generation and adjust build flags for reduced verbosity and enhanced functionality.
2026-04-23 22:48:21 -07:00
agessaman 7d0c5bce50 enhance(mqtt): improve QoS handling and retry logic in MQTTBridge
Refactor the MQTTBridge to implement enhanced QoS handling for publish operations. Introduce retry mechanisms for QoS0 packets, allowing for transient failures to be retried with a delay. Update publish methods to return success status, improving error handling and logging. Additionally, adjust the packet queue processing to accommodate new retry logic and ensure better message delivery control.
2026-04-23 21:06:49 -07:00
Liam Cottle 5372388e6e Merge pull request #2353 from jirogit/fix/techo-lite-non-shell-ble-clean
feat(techo-lite): add Non-Shell companion BLE variant
2026-04-22 20:25:32 +12:00
Liam Cottle dc548578ff Merge pull request #2287 from pelgraine/fix/techo-lite-battery
Fixes #1183 — T-Echo Lite incorrect battery voltage
2026-04-22 20:23:21 +12:00
Liam Cottle d3b457681a Merge pull request #2008 from weebl2000/p_lora_reset_rak4631
Fix RAK4631 SX1262 hardware pin config
2026-04-22 19:45:06 +12:00
Wessel Nieboer 66fe9ac2db Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
agessaman d6712c69c8 Merge mqtt-bridge-implementation into mqtt-bridge-implementation-flex
Integrate upstream/dev changes from merge 563d9a7 while preserving flex
MQTT memory and CLI behavior (slot commands, snmp, mqtt.rx/advert TX,
bridge.source sync, prefs layout, cert ignore rules).

Made-with: Cursor
2026-04-21 21:38:18 -07:00
agessaman e9ff1ae055 Refactor PsychicMqttClient to improve memory management and callback handling. Replace dynamic memory allocations with fixed-size arrays for callbacks, enhancing performance and reducing fragmentation. Introduce inline storage for topics and optimize buffer allocation during connection setup. Update version to 0.2.2 to reflect changes. 2026-04-21 20:43:09 -07:00
pelgraine d516cd8a9e Fixes #1183 — T-Echo Lite incorrect battery voltage
Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo
Lite has a gated voltage divider that must be enabled before reading. Also
added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02
from other peripherals. Pin definitions hardcoded from LilyGo's
t_echo_lite_config.h.

I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per
LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the
battery ADC pin.

GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's
config — UART TX/RX, wake, PPS, and power enable were all scrambled.

SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2).

Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match
Heltec V4 reference within 10mV.
2026-04-22 12:56:15 +10:00
Wessel Nieboer 07671cf1fe Implement proper shutdown procedure for R1 neo
fixes #2361
2026-04-21 21:29:18 +02:00
me 28b1586fd7 feat(techo-lite): add Non-Shell (screenless) companion BLE variant
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.

Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)

Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
  to enable reliable flashing via PlatformIO upload button
2026-04-20 21:08:08 -07:00
agessaman 563d9a7d39 Merge upstream/dev into mqtt-bridge-implementation
Resolve conflicts: devcontainer Node feature; UITask USER_BTN + MQTT WiFi;
room server ctor with RegionMap + MQTTBridge; CommonCLI prefs layout
(rx_boosted_gain after owner_info), refactor get/set into handlers with
MQTT CLI branches and getBoard preserved.

Made-with: Cursor
2026-04-19 10:08:27 -07:00
Marco e8907a3108 Add Heltec V4 set adc.multiplier 2026-04-19 15:29:43 +02:00
ripplebiz 35b5548c0c Merge pull request #2328 from recrof/xiao_c3-companion-fix
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
Liam Cottle 54a48da6b5 Merge pull request #2306 from petrkr/otaupdate2
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
Rastislav Vysoky 0899f66034 fix: remove sensors from xiao c3 companion because of bootloops 2026-04-18 09:42:27 +02:00
Kevin Le 992dddeee5 Added support for Expansion Kit to Heltec V4 OLED repeaters 2026-04-18 09:24:53 +07:00
agessaman 0ed29cb7f2 Comment out MQTT debug configurations in platformio.ini for heltec_v4 variants to streamline the build environment. 2026-04-17 14:52:57 -07:00
jirogit 230c9af87b feat: add USB Companion Radio env for Heltec Wireless Paper 2026-04-15 19:43:51 -07:00
Petr Kracik e6c6282d40 Variants: Enable ElegantOTA on ESP32-C6 devices 2026-04-14 15:40:31 +02:00
Rastislav Vysoky bd05eca9f5 Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb 2026-04-13 21:09:56 +02:00
Huw Duddy 49221fc159 Merge pull request #2298 from TheMalkavien/fix/waveshare-rp2040-rx-sensitivity
Fixes #2294 : RX path not enabled on Waveshare RP2040
2026-04-14 01:36:26 +10:00
Liam Cottle 748f9cfdda Merge pull request #2072 from robekl/fix-t1000e-pin-comments
Fix T1000-E pin comments
2026-04-13 02:27:19 +12:00
Liam Cottle 3ff8b17660 Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
liamcottle 7d8d66c3e6 fix compilation error in wifi variants due to not enough ram 2026-04-13 01:03:32 +12:00
Malkavien 8056344b86 fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL)  -- driven automatically by the SX1262 chip: HIGH on TX,
  LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
  the switch never properly selected the LNA/RX path

Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.

Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.

Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
2026-04-12 14:49:42 +02:00
Liam Cottle a9de5bfc0c Merge pull request #1612 from weebl2000/default-button-low
Default button polarity to active-LOW across all firmware types
2026-04-12 23:30:28 +12:00
Liam Cottle f2b61f1ce5 Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
2026-04-12 22:45:00 +12:00
Snayler d360931aa7 Merge branch 'meshcore-dev:dev' into dev 2026-04-10 18:31:52 +01:00
me d9cfd075a5 fix: remove real WiFi credentials from ThinkNode M5 variant
variants/thinknode_m5/platformio.ini contained actual WiFi SSID and
password credentials (Livebox-633C) committed by mistake. Replaced
with placeholder values consistent with other variants (myssid/mypwd).
2026-04-05 22:50:59 -07:00
agessaman 3b46e9eeed Enhance MQTT bridge implementation by adding support for the TennMesh preset, including fixed username/password authentication. Update documentation to reflect new preset details and modify error messages in CommonCLI for improved clarity. Adjust MQTTBridge to handle new authentication methods and ensure proper connection management across all slots. 2026-04-05 22:38:56 -07:00
agessaman 258a0d724c Update MQTTBridge to use runtime-configurable MQTT slot limits based on PSRAM availability. Modify related logic in MQTTBridge.cpp and MQTTBridge.h to replace static MAX_MQTT_SLOTS with RUNTIME_MQTT_SLOTS. Adjust platformio.ini to reduce verbosity of debug logging for improved performance. 2026-04-04 13:48:34 -07:00
Wessel Nieboer 057542625b Fix T1000E press=high 2026-04-04 13:19:13 +02:00
Wessel Nieboer 0a13ac7fc7 Default button polarity to active-LOW across all firmware types
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Wessel Nieboer a5ae89aac0 Fix RAK4631 SX1262 hardware pin config 2026-04-04 13:18:17 +02:00
Liam Cottle 0afd5a9336 Merge pull request #2244 from jirogit/fix/generic-espnow-advert-name
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
2026-04-04 17:24:50 +13:00
jirogit 6769b74df6 fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME,
causing Generic ESPNow room server nodes to advertise with the wrong
device name on the mesh.
2026-04-03 19:08:15 -07:00
jirogit ce32d91ecb fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
Repeater and Room Server environments in variants/thinknode_m5/platformio.ini
were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise
with the wrong device name on the mesh.

- env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater'
- env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'
2026-04-03 18:55:39 -07:00
KPrivitt 27f732653b Added RAK12035 Soil Moisture and Temperature Sensor (#2223) 2026-04-03 22:54:24 +13:00
agessaman f0962efff4 Remove obsolete CoolTerm capture file and enhance MQTTBridge diagnostics by adding disconnect count and first disconnect time tracking. Update MQTTBridge.h and MQTTBridge.cpp to support new diagnostic features, and modify platformio.ini files to adjust WiFi transmission power settings for various variants. Update MQTT_IMPLEMENTATION.md with new TLS timeout build profiles for improved logging and troubleshooting. 2026-04-02 06:40:34 -07:00
Liam Cottle d0450bca99 Merge pull request #2228 from liamcottle/refactor/gat562-mesh-watch
Refactor GAT562 Mesh Watch
2026-04-02 17:19:12 +13:00
Liam Cottle b934daa990 Merge pull request #2007 from khudson/r1neo
Muzi Works R1 Neo support
2026-04-02 00:36:44 +13:00
Liam CottleandWessel fcad0dc7ed Apply suggestion from @weebl2000
Co-authored-by: Wessel <wessel@weebl.me>
2026-04-02 00:27:58 +13:00
Liam CottleandWessel 8fc9e1736c Apply suggestion from @weebl2000
Co-authored-by: Wessel <wessel@weebl.me>
2026-04-02 00:23:52 +13:00