Keep stealth separate from custom, saved-random and rotating MAC policies without migrating the development MAC mode. Persist authenticated peer state, guard advertising transitions and recovery, and expose the setting through the CLI and WebConfig.
Add regression and CI checks and record exact XIAO BLE pairing, reconnect, reboot and address-rotation hardware results.
The project moved to meshcore-dev/meshcore, but two links still pointed at
ripplebiz/MeshCore: the GitHub Issues link in README and the git clone in the
FAQ build instructions.
Also fixes the FAQ build recipe:
- `pio run -e RAK_4631_Repeater` does not exist; the env is spelled
RAK_4631_repeater (variants/rak4631/platformio.ini:40).
- LORA_FREQ was given as 867.5; the default in [arduino_base] is 869.618
(platformio.ini:29). Reworded to point at the flag rather than a value that
drifts with the default preset.
- Renamed the venv so it no longer collides with the cloned directory name.
And one more env-name casing slip in the Raspberry Pi flashing instructions:
`Heltec_V3_companion_radio_ble` should be `Heltec_v3_...`. Release artifacts are
named directly from the env name (build.sh:147), and the two neighbouring
examples in the same block already use the lowercase spelling.
f6338430 added get/set dutycycle to CommonCLI and updated both CLI docs, but
Terminal Chat does not use CommonCLI -- simple_secure_chat/main.cpp:479-507 has
its own `set` handler supporting only af, name, lat, lon, tx and freq. Typing
`set dutycycle` there returns "ERROR: unknown config".
Restores `set af` as the documented command, points readers at cli_commands.md
for the roles that do have dutycycle, and documents `help`
(simple_secure_chat/main.cpp:510), which the client implements but the doc
never listed.
The doc claimed every pwrmgt command except `get pwrmgt.support` returns
"ERROR: Power management not supported" when NRF52_POWER_MANAGEMENT is not
defined. `get pwrmgt.bootreason` is not inside the #ifdef (CommonCLI.cpp:787)
and answers on all boards; only pwrmgt.source and pwrmgt.bootmv are gated.
Three factual errors in companion_protocol.md:
- The channel-datagram payload cap was given as 163 (MAX_FRAME_SIZE - 9 when
MAX_FRAME_SIZE was still 172). It went 172 -> 176 in 62f1b11d, but simply
updating the arithmetic to 167 would be worse than the stale value: 167 is
only the host-frame bound (MyMesh.cpp:1265). The radio-side bound is
MAX_GROUP_DATA_LENGTH = 184 - 16 - 3 = 165 (MeshCore.h:21, enforced at
BaseChatMesh.cpp:544). A 166- or 167-byte payload passes the frame check,
fails the radio check, and comes back as ERR_CODE_TABLE_FULL -- which this
same doc describes as "retry later", so a conforming client would retry a
permanently failing send forever. Documents 165 as the limit to enforce and
calls out the 166-167 band explicitly.
- Channel index was documented as 0-7 throughout. The bound is
MAX_GROUP_CHANNELS (BaseChatMesh.cpp:927,936), which is 40 on most current
variants, 8 on some and 1 on others. Clients should read max_channels from
byte 3 of PACKET_DEVICE_INFO instead. Index 0 is pre-populated with the
built-in Public channel but is not reserved.
- The secret field was documented as "all zeros" for public channels. The
firmware always hashes a real 16-byte key; the public channel ships with
izOH6cXN6mrJ5e26oRXNcg== (companion_radio/MyMesh.cpp:111,1040). An all-zero
secret is not a private channel and not an inert one: SHA256 over 16 zero
bytes is a fixed global constant, giving a well-known channel with an
all-zero AES key. searchChannelsByHash skips unnamed slots for exactly this
reason (BaseChatMesh.cpp:392-401), but a named slot with a zero secret is
not skipped and will absorb null-key group traffic from any node. Now
documented as something not to do.