Fix the STM32 flash overflows and fleet fixture compile failure from
https://github.com/mikecarper/MeshCore/actions/runs/40241742182.
Fold already-unsupported RX control paths only for the integrated STM32WL
wrapper. Preserve RXPS-off validation, persistence, pending application and
rollback. External radios retain their supported controls.
Use measured GCC 14 code sharing in the four small STM32 USB Companion
recipes. Keep firmware features, contact/channel capacities, filesystem
boundaries and flash/RAM admission checks unchanged.
Refresh downstream host fixtures for saved radio intent, deferred service
restarts, WebConfig ownership, RX recovery and color tint state. Retain or
strengthen behavior checks rather than skipping failing coverage.
Validation: canonical RAK3x72, Wio Mini, Wio Dev and Tiny Relay USB Companion
packages and Mini Repeater build passed at release-version length. All
post-failure host checks, compact arithmetic/float checks, build-profile and
real PlatformIO recipe/path/RAM-policy checks passed locally.
A settings save could reach the power setter while RX, TX, duty cycling or a
profile transition owned the radio, returning BAD_STATE after earlier settings
had already saved. Distinguish busy admission from a hardware rejection and
reuse the existing command route, storage and three-second deadline for power.
Acknowledge only after hardware acceptance and a successful preference save.
Skip hardware work for verified unchanged power. Invalidate that verification
after failed writes or radio initialization, retaining rollback and exclusive
beacon/Morse ownership. Keep the existing firmware memory limits and features.
Cover retries, captured routes, timeout/rollover, disconnect, partial writes,
failed saves and recovery. Keep ESP-NOW/simulation adapters compatible and add
ESP-NOW Companion compilation to the existing sequential smoke job.
Add checked protocol adapters for every project LoRa family and enable Indicator LoRa TX. Preserve normal modem restoration, LR1110 fast hops, LR2021 side detectors and physical-band power limits.
Fix SX1276 beacon CAD completion dispatch, concrete-chip validation on multi-chip variants, no-GPS sensor hook linkage and STM32 file construction. Add fault, negative-control and preset coverage to CI. Keep flash-constrained STM32 artifacts disabled after measured opt-in overflows.