Declare fixture feature boundaries and SDK mocks explicitly, retain USB recovery ownership checks, and recognize the unified V4 display and read-only diagnostics in contract tests.
Adapt upstream MeshCore #3579 at 7457cff43c22697119e06ad7d192a37de0990403:
retain GC1109 LF standby bias, with checked cold controls before band supply
changes and shutdown. Preserve exclusive LF/HF rails and TX error cleanup.
Reset before boot rail changes and before SPI-dependent hard recovery.
Retain our stronger implementation of #3512 at
d208bfef94ab83280de30ba4a0675ff73b3ecef3. Add regressions for suspect FIFO
contents, failed RX_DONE acknowledgement, and fresh preamble timing.
W12 TX power defaults from #3319 were already included via 65aa1138a.
Validation: 79 targeted native tests; canonical W12 Full repeater and Full
Companion builds, capability checks, app-size and RAM checks passed.
Physical W12 RF envelope, current and LoRa management confirmation remain.
Upstream PRs:
https://github.com/meshcore-dev/MeshCore/pull/3579https://github.com/meshcore-dev/MeshCore/pull/3512https://github.com/meshcore-dev/MeshCore/pull/3319
A settings save could reach the power setter while RX, TX, duty cycling or a
profile transition owned the radio, returning BAD_STATE after earlier settings
had already saved. Distinguish busy admission from a hardware rejection and
reuse the existing command route, storage and three-second deadline for power.
Acknowledge only after hardware acceptance and a successful preference save.
Skip hardware work for verified unchanged power. Invalidate that verification
after failed writes or radio initialization, retaining rollback and exclusive
beacon/Morse ownership. Keep the existing firmware memory limits and features.
Cover retries, captured routes, timeout/rollover, disconnect, partial writes,
failed saves and recovery. Keep ESP-NOW/simulation adapters compatible and add
ESP-NOW Companion compilation to the existing sequential smoke job.
Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
Reject truncated anonymous reply paths and advert metadata before copying,
while preserving timestamp-only empty-password logins. Limit room posting to
read-write/admin ACL roles, retain inbox frames until the requesting transport
accepts them, and lock raw LittleFS traversal against concurrent writes.
Separate ISR event generations from main-loop radio state. Confirm RX/TX IRQs,
detach concrete wrapper callbacks safely, and discard inconsistent LR2021 FIFO
snapshots before rearming. Preserve bridge RX frames through packet-pool
exhaustion and bound ESP-NOW retries and missing-callback recovery. Screen RTC
register layouts without losing DS1307 startup, and ignore poisoned future
contact timestamps during clock bootstrap.
Keep the nRF52 loop stack at 8 KiB while reducing the OTA listing call chain
from 7,832 to 6,056 static bytes. Retain all target names through lossless Full
Companion compression and the canonical size optimizer. Preserve constrained
STM32 filesystems and bind corrected ESP32 UART/OLED budgets to source size
assertions. Document the separately measured preexisting W12 package limits.
Adapted for this branch from meshcore-dev/MeshCore PRs #3521, #3340, #3362,
#2062, #3503, #3038, #3534, #3544 and #3512.
Validation: 1,829 native tests; sanitized parser, inbox, LittleFS, ACL, clock,
RTC, IRQ/FIFO and bridge fault tests; 332 additional Companion cases; real
RAK4631 Full and both repeater profiles, G2 Full/standard, V3 Full and both
constrained STM32 release recipes. Radio-family compile coverage continues
separately; W12 full/portable package guards remain enforced.
Retain the original carrier feature from PR #11 with zero-deviation FSK, board PA calibration, and LoRa restoration. Re-key after power changes without extending the timeout, and restore prior power after a failed sweep. Cover native and SX1276 transitions, failure recovery, external PA and RFO mapping; verify Linkflow repeater and Heltec V2 USB Companion builds.
Support fractional seconds, guard active packet work, keep the MCU awake, and restore reception after carrier tests. Include regression coverage and independent-radio RF validation for the V4 and T1000-E.