Add normalradio to common CLI

docs/cli_command_availability.md

@@ -71,7 +71,7 @@ fix, no WiFi connection, an inactive bridge, or an nRF52 bootloader without
 | Logging | [`get/set usb.logging`](cli_commands.md#control-live-usb-logging) | Logging artifacts; session-only live USB output gate | No | Yes | No |
 | Radio | [`get radio`; `set radio ...`](cli_commands.md#view-or-change-this-nodes-radio-parameters) | All text CLI roles | Yes | Yes | Yes |
 | Radio | [`get tx`; `set tx <dbm>`](cli_commands.md#view-or-change-this-nodes-transmit-power) | Board TX-power limits apply | Yes | Yes | Yes |
-| Radio | [`tempradio ...`](cli_commands.md#change-the-radio-parameters-for-a-set-duration) | Full parser | Yes | Yes | Yes |
+| Radio | [`tempradio ...`; `normalradio`](cli_commands.md#change-the-radio-parameters-for-a-set-duration) | Full parser | Yes | Yes | Yes |
 | Radio | [`get/set/del radioat`; `get/set/del tempradioat`](cli_commands.md#schedule-radio-parameter-changes) | Full parser | Yes | Yes | Yes |
 | Radio | [`get freq`; `set freq <mhz>`](cli_commands.md#view-or-change-this-nodes-frequency) | `set` is local serial only | Yes | Yes | Yes |
 | Radio | [`get/set radio.rxgain`](cli_commands.md#view-or-change-this-nodes-rx-boosted-gain-mode-sx12xx-and-lr1110-v1141) | Supported radio | Feature | Feature | Feature |
@@ -229,7 +229,7 @@ fix, no WiFi connection, an inactive bridge, or an nRF52 bootloader without
 | Logging | [`get/set usb.logging`](cli_commands.md#control-live-usb-logging) | Logging artifacts; session-only live USB output gate | No | Yes | No | No | Yes |
 | Radio | [`get radio`; `set radio ...`](cli_commands.md#view-or-change-this-nodes-radio-parameters) | All text CLI roles | Yes | Yes | Yes | Yes | Yes |
 | Radio | [`get tx`; `set tx <dbm>`](cli_commands.md#view-or-change-this-nodes-transmit-power) | Board TX-power limits apply | Yes | Yes | Yes | Yes | Yes |
-| Radio | [`tempradio ...`](cli_commands.md#change-the-radio-parameters-for-a-set-duration) | Full parser | Yes | Yes | Yes | Yes | Yes |
+| Radio | [`tempradio ...`; `normalradio`](cli_commands.md#change-the-radio-parameters-for-a-set-duration) | Full parser | Yes | Yes | Yes | Yes | Yes |
 | Radio | [`get/set/del radioat`; `get/set/del tempradioat`](cli_commands.md#schedule-radio-parameter-changes) | Full parser | Yes | Yes | Yes | Yes | Yes |
 | Radio | [`get freq`; `set freq <mhz>`](cli_commands.md#view-or-change-this-nodes-frequency) | `set` is local serial only | Yes | Yes | Yes | Yes | Yes |
 | Radio | [`get/set radio.rxgain`](cli_commands.md#view-or-change-this-nodes-rx-boosted-gain-mode-sx12xx-and-lr1110-v1141) | Supported radio | Feature | Feature | Feature | Feature | Feature |

docs/cli_commands.md

@@ -576,6 +576,7 @@ It also does not change the node-storage capture controlled by `log start` and
 #### Change the radio parameters for a set duration
 **Usage:** 
 - `tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>`
+- `normalradio`
 
 **Parameters:**
 - `freq`: Frequency in MHz (150-2500)
@@ -584,7 +585,11 @@ It also does not change the node-storage capture controlled by `log start` and
 - `cr`: Coding rate (5-8)
 - `timeout_mins`: Duration in minutes (must be > 0)
 
-**Note:** This is not saved to preferences and will clear on reboot
+**Notes:**
+- `tempradio` is not saved to preferences and clears on reboot.
+- `normalradio` cancels pending and active temporary-radio windows, then
+  restores the saved radio tuple after its CLI reply has drained on the
+  current channel. Permanent `radioat` entries are not removed.
 
 ---
 

docs/ota_easy.md

@@ -36,8 +36,9 @@ The fourth value is the transmit coding rate. This guide uses CR5, but the parti
 do not need to match.
 
 `tempradio` is not saved and the node returns to its normal radio settings when the window ends or the node
-reboots. This frequency is intended for North American configurations. Confirm that it is permitted in your
-location and change it when necessary.
+reboots. Current full-parser firmware also accepts `normalradio`, which cancels the temporary window and
+restores the saved tuple after replying on the current channel. This frequency is intended for North American
+configurations. Confirm that it is permitted in your location and change it when necessary.
 
 ## Before you start
 

docs/rak3401_mota_chain.md

@@ -287,9 +287,15 @@ different problems.
 
 After step 9 is proven, restore each saved destination and relay value exactly,
 including `rxdelay`, RXPS, CPU power saving, `af`, `ota config hops`, and relay
-timing. Ordinary repeater firmware does not implement `normalradio`. While the
-node is still reachable on the temporary channel, shorten its lease to one
-minute with the same tuple:
+timing. Current full-parser repeater firmware accepts `normalradio` and restores
+the saved tuple after replying on the temporary channel:
+
+```text
+normalradio
+```
+
+The historical endpoint in this pinned bundle predates that command. If it
+replies `Unknown command`, shorten its lease to one minute with the same tuple:
 
 ```text
 tempradio 909.950,500,5,5,1