Unify full firmware profiles and add dual USB logging

variants/minewsemi_me25ls01/target.cpp

@@ -1,5 +1,6 @@
-#include <Arduino.h>
-#include "target.h"
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/UsbLogging.h>
 
 MinewsemiME25LS01Board board;
 
@@ -58,12 +59,11 @@ bool radio_init() {
 
   SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
   SPI.begin();
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    return false;  // fail
-  }
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    mesh::usbLoggingPort().printf("ERROR: radio init failed: %d\r\n", status);
+    return false;  // fail
+  }
   
   radio.setCRC(1);
 

variants/t1000-e/target.cpp

@@ -1,6 +1,7 @@
 #include <Arduino.h>
 #include "t1000e_sensors.h"
 #include "target.h"
+#include <helpers/UsbLogging.h>
 #include <helpers/sensors/MicroNMEALocationProvider.h>
 
 T1000eBoard board;
@@ -56,8 +57,7 @@ bool radio_init() {
   SPI.begin();
   int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
   if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
+    mesh::usbLoggingPort().printf("ERROR: radio init failed: %d\r\n", status);
     return false;  // fail
   }
   

variants/thinknode_m3/target.cpp

@@ -1,5 +1,6 @@
 #include <Arduino.h>
 #include "target.h"
+#include <helpers/UsbLogging.h>
 #include <helpers/sensors/MicroNMEALocationProvider.h>
 
 ThinkNodeM3Board board;
@@ -60,8 +61,7 @@ bool radio_init() {
   SPI.begin();
   int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
   if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
+    mesh::usbLoggingPort().printf("ERROR: radio init failed: %d\r\n", status);
     return false;  // fail
   }