Merge branch 'PowerSaving-v17' of https://github.com/IoTThinks/MeshCore into keymindCascade
# Conflicts: # examples/companion_radio/MyMesh.cpp # examples/companion_radio/NodePrefs.h # examples/simple_repeater/MyMesh.cpp # examples/simple_room_server/MyMesh.cpp # examples/simple_sensor/SensorMesh.cpp # platformio.ini # src/MeshCore.h # src/helpers/CommonCLI.cpp # src/helpers/CommonCLI.h # src/helpers/radiolib/CustomSX1262Wrapper.h # src/helpers/radiolib/CustomSX1268Wrapper.h # src/helpers/radiolib/LR11x0Reset.h # src/helpers/radiolib/SX126xReset.h
This commit is contained in:
commit
ea3843e0b4
33 files changed
+679
-204
No files matched your search
@@ -79,6 +79,7 @@ fix, no WiFi connection, an inactive bridge, or an nRF52 bootloader without
|
||||
| Radio | [`get freq`; `set freq <mhz>`](cli_commands.md#view-or-change-this-nodes-frequency) | `set` is local serial only | Yes | Yes | Yes |
|
||||
| Radio | [`get/set radio.rxgain`](cli_commands.md#view-or-change-this-nodes-rx-boosted-gain-mode-sx12xx-and-lr1110-v1141) | Supported radio | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.fem.rxgain`](cli_commands.md#view-or-change-the-lora-fem-receive-path-gain-state-on-supported-boards) | Controllable LoRa FEM | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.fem.txgain`](cli_commands.md#view-or-change-the-lora-fem-transmit-path-gain-state-on-supported-boards) | Controllable LoRa FEM | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.rxps`; `get rxps.wd`](#radio-rxps) | RX power-saving support | Feature | Feature | Feature |
|
||||
| System | [`get/set name`](cli_commands.md#view-or-change-this-nodes-name) | All text CLI roles | Yes | Yes | Yes |
|
||||
| System | [`get/set lat`](cli_commands.md#view-or-change-this-nodes-latitude) | All text CLI roles | Yes | Yes | Yes |
|
||||
@@ -234,6 +235,7 @@ fix, no WiFi connection, an inactive bridge, or an nRF52 bootloader without
|
||||
| Radio | [`get freq`; `set freq <mhz>`](cli_commands.md#view-or-change-this-nodes-frequency) | `set` is local serial only | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
|
||||
| Radio | [`get/set radio.rxgain`](cli_commands.md#view-or-change-this-nodes-rx-boosted-gain-mode-sx12xx-and-lr1110-v1141) | Supported radio | Feature | Feature | Feature | Feature | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.fem.rxgain`](cli_commands.md#view-or-change-the-lora-fem-receive-path-gain-state-on-supported-boards) | Controllable LoRa FEM | Feature | Feature | Feature | Feature | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.fem.txgain`](cli_commands.md#view-or-change-the-lora-fem-transmit-path-gain-state-on-supported-boards) | Controllable LoRa FEM | Feature | Feature | Feature | Feature | Feature | Feature | Feature |
|
||||
| Radio | [`get/set radio.rxps`; `get rxps.wd`](#radio-rxps) | Full parser and RX power-saving support | Feature | Feature | Feature | No | No | Feature | Feature |
|
||||
| System | [`get/set name`](cli_commands.md#view-or-change-this-nodes-name) | All full-parser text CLI roles | Yes | Yes | Yes | No | No | Yes | Yes |
|
||||
| System | [`get/set lat`](cli_commands.md#view-or-change-this-nodes-latitude) | All full-parser text CLI roles | Yes | Yes | Yes | No | No | Yes | Yes |
|
||||
|
||||
@@ -605,6 +605,22 @@ Station G2/G3 targets default to `off`.
|
||||
|
||||
---
|
||||
|
||||
#### View or change the LoRa FEM transmit-path gain state on supported boards
|
||||
**Usage:**
|
||||
- `get radio.fem.txgain`
|
||||
- `set radio.fem.txgain <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Notes:**
|
||||
- This controls a software-selectable external LoRa FEM transmit gain where the board supports it.
|
||||
- On Station G3, remove the PA PL1 jumper to allow software control. `on` selects PA PL1 high/short and `off` selects PA PL1 low/open. The PA PL2 hardware jumper determines whether this switches between power levels 1/3 or 2/4.
|
||||
- Select an operating level and SX1262 transmit power that comply with local RF limits and the Station G3 power-supply requirements.
|
||||
- The setting is saved immediately, but on Station G3 the level is applied to the hardware at the start of the next transmit, so that the PA supply rail is never re-targeted while the PA is being driven. `get` reports the configured state, which may lead the hardware until the node next transmits.
|
||||
|
||||
---
|
||||
|
||||
### System
|
||||
|
||||
#### View or change this node's name
|
||||
|
||||
@@ -57,9 +57,13 @@ boost** switch. From the USB terminal, use:
|
||||
get radio.fem.rxgain
|
||||
set radio.fem.rxgain off
|
||||
set radio.fem.rxgain on
|
||||
get radio.fem.txgain
|
||||
set radio.fem.txgain off
|
||||
set radio.fem.txgain on
|
||||
```
|
||||
|
||||
The selected state is applied immediately and retained after reboot.
|
||||
The selected states are applied immediately and retained after reboot. FEM TX
|
||||
gain is reported as unsupported on boards without software-selectable PA gain.
|
||||
|
||||
Artifacts are written to `out/` by default.
|
||||
|
||||
|
||||
@@ -87,12 +87,14 @@ Sets the transmit air-time-factor. Deprecated - use `set dutycycle` instead.
|
||||
```
|
||||
get radio.fem.rxgain
|
||||
set radio.fem.rxgain {on|off}
|
||||
get radio.fem.txgain
|
||||
set radio.fem.txgain {on|off}
|
||||
```
|
||||
Shows or changes the external FEM receive-path LNA on supported Heltec boards.
|
||||
The change is applied immediately, saved across reboots, and recalibrates the
|
||||
radio noise floor. This is separate from the SX126x `radio.rxgain` setting.
|
||||
Boards whose FEM receive path cannot be controlled report the setting as
|
||||
unsupported.
|
||||
Shows or changes the external FEM receive-path LNA or transmit-path gain on
|
||||
supported boards. Changes are applied immediately and saved across reboots;
|
||||
changing RX gain also recalibrates the radio noise floor. These settings are
|
||||
separate from the SX126x `radio.rxgain` setting. Boards without the respective
|
||||
control report it as unsupported.
|
||||
|
||||
|
||||
```
|
||||
|
||||
Reference in new issue
Block a user