Publish one ordinary ESP32 Full image per board role
This commit is contained in:
1 parent
b0b9e53dd7
commit
df19760c85
6 files changed
+311
-44
No files matched your search
@@ -46,15 +46,22 @@ an old or failed artifact without a verified sidecar.
|
||||
For a single ESP32 repeater or room-server target, `auto` selects its matching
|
||||
combined Full MQTT/USB/WiFi image when that image covers the plain Full recipe.
|
||||
The direct observer and Full-matrix paths use the same `full-usb-wifi-ota`
|
||||
artifact and runtime output controls. Plain Full T-Beam SX1262/SX1276 profiles
|
||||
and the TLora V2 repeater remain alternatives because their MQTT siblings have
|
||||
lower routing-table capacities.
|
||||
artifact and runtime output controls. The ordinary bulk release publishes one
|
||||
Full OTA identity per exact ESP32 board and role. Audited plain targets keep
|
||||
their identity while compiling the combined observer/ESP-NOW sources; G2 keeps
|
||||
its deployed observer identity. T-Beam SX1262/SX1276 and TLora V2 choose the
|
||||
observer in the ordinary release. Their plain Full recipes remain available
|
||||
as explicit alternatives with different routing capacities. Build one with
|
||||
`bash build.sh build-firmware <target> --full-exact`, then deliberately install
|
||||
it over LoRa with `ota pull <MID8> flash` and `ota install` on compatible
|
||||
hardware and partition layouts.
|
||||
|
||||
Standard and reduced OTA images, including images that fit the 1.25 MiB
|
||||
portable application slot, remain available and remain in the standard matrix
|
||||
pass. Select `--build-profile standard` to retain the original target and
|
||||
partition contract. Moving from a plain target to its MQTT sibling changes the
|
||||
LoRa OTA target identity; existing nodes need an appropriate wired migration.
|
||||
LoRa OTA target identity; a partition layout change needs its matching
|
||||
migration step.
|
||||
For the normal-role partition migrations, the matrix also publishes a
|
||||
canonical Full image under the normal target identity. Install its matching
|
||||
merged image over USB once; mOTA rejects the incompatible partition signature
|
||||
|
||||
+13
-1
@@ -205,7 +205,9 @@ long ago it was seen. The fit marker:
|
||||
in-place delta. A matched external-QSPI nRF52 can accept that full codec.
|
||||
- **[rescue]** - an installable in-place nRF52 delta for the same target, but this running firmware has no
|
||||
valid app-side EndF. It requires the explicit rescue download and install flow below.
|
||||
- **[name]** - a different known board or role (for example `[ProMicro_companion_radio_usb]`). Don't install it.
|
||||
- **[name]** - a different known board or role (for example `[ProMicro_companion_radio_usb]`).
|
||||
Install it only if you deliberately chose a different role for the same hardware; the installer
|
||||
still checks the hardware identity and partition layout.
|
||||
- **[?]** - can't tell (a build with no target id set, e.g. a bare IDE build rather than a release build).
|
||||
|
||||
Run it again after a few seconds - discovery happens in the background, so the list fills in. Nothing is
|
||||
@@ -233,6 +235,16 @@ host folder - nothing is staged on this node. That's how you grab an **exact cop
|
||||
firmware** off the mesh (to a `.mota` file) so you can later build a *delta* against firmware you don't
|
||||
otherwise have. (`ota get` is an alias.)
|
||||
|
||||
**Deliberate alternate image.** An operator can choose a different target ID
|
||||
for the same physical board by selecting its exact manifest ID from `ota ls`,
|
||||
then running `ota pull <MID8> flash` and `ota install`. The target ID controls
|
||||
which image is discovered and fetched; it does not lock manual installs to
|
||||
the current role. The hardware identity, codec, image hash, and partition
|
||||
checks still run. Automatic updates follow the firmware's selected target
|
||||
(or its declared one-way successor), so use `ota config autofetch off` and
|
||||
`ota config autoinstall off` if you want to keep an alternate image without
|
||||
automatic convergence.
|
||||
|
||||
**`validate` (warm-start, advanced).** Capturing a full image over the radio is slow. If you have a
|
||||
*similar* build on the computer (e.g. a fresh recompile of the same firmware), run motatool with
|
||||
`--seed <that.mota>` and add **`validate`**: the node fetches just the target's block fingerprints, keeps
|
||||
|
||||
Reference in new issue
Block a user