Merge remote-tracking branch 'IoTThinks/PowerSaving-v16' into keymindCascade
# Conflicts: # build-iotthinks.sh # build.sh # examples/simple_repeater/MyMesh.h # src/helpers/CommonCLI.cpp # variants/heltec_ct62/platformio.ini # variants/heltec_t096/T096Board.cpp # variants/heltec_t096/platformio.ini # variants/heltec_tracker/platformio.ini # variants/heltec_tracker_v2/platformio.ini # variants/heltec_v2/platformio.ini # variants/heltec_v3/HeltecV3Board.h # variants/heltec_v3/platformio.ini # variants/heltec_v4/HeltecV4Board.cpp # variants/heltec_v4/platformio.ini # variants/heltec_wireless_paper/platformio.ini # variants/lilygo_tbeam_1w/platformio.ini # variants/lilygo_tbeam_SX1262/platformio.ini # variants/lilygo_tbeam_SX1276/platformio.ini # variants/lilygo_tbeam_supreme_SX1262/platformio.ini # variants/lilygo_tlora_v2_1/platformio.ini # variants/xiao_c3/platformio.ini # variants/xiao_s3_wio/platformio.ini
This commit is contained in:
commit
d9cefed1b1
96 files changed
+757
-878
No files matched your search
@@ -62,6 +62,8 @@
|
||||
#define CMD_SET_DEFAULT_FLOOD_SCOPE 63
|
||||
#define CMD_GET_DEFAULT_FLOOD_SCOPE 64
|
||||
#define CMD_SEND_RAW_PACKET 65
|
||||
#define CMD_GET_RADIO_FEM_RXGAIN 66
|
||||
#define CMD_SET_RADIO_FEM_RXGAIN 67
|
||||
|
||||
// Stats sub-types for CMD_GET_STATS
|
||||
#define STATS_TYPE_CORE 0
|
||||
@@ -889,6 +891,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
|
||||
_prefs.rx_boosted_gain = 1; // enabled by default
|
||||
#endif
|
||||
#endif
|
||||
_prefs.radio_fem_rxgain = 1;
|
||||
}
|
||||
|
||||
void MyMesh::begin(bool has_display) {
|
||||
@@ -938,6 +941,7 @@ void MyMesh::begin(bool has_display) {
|
||||
_prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, -9, MAX_LORA_TX_POWER);
|
||||
_prefs.gps_enabled = constrain(_prefs.gps_enabled, 0, 1); // Ensure boolean 0 or 1
|
||||
_prefs.gps_interval = constrain(_prefs.gps_interval, 0, 86400); // Max 24 hours
|
||||
_prefs.radio_fem_rxgain = constrain(_prefs.radio_fem_rxgain, 0, 1);
|
||||
|
||||
#ifdef BLE_PIN_CODE // 123456 by default
|
||||
if (_prefs.ble_pin == 0) {
|
||||
@@ -967,6 +971,7 @@ void MyMesh::begin(bool has_display) {
|
||||
radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
|
||||
radio_driver.setTxPower(_prefs.tx_power_dbm);
|
||||
radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
|
||||
board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
|
||||
MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
|
||||
radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled");
|
||||
}
|
||||
@@ -1825,6 +1830,30 @@ void MyMesh::handleCmdFrame(size_t len) {
|
||||
} else {
|
||||
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
||||
}
|
||||
} else if (cmd_frame[0] == CMD_GET_RADIO_FEM_RXGAIN) {
|
||||
if (!board.canControlLoRaFemLna()) {
|
||||
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
|
||||
} else {
|
||||
out_frame[0] = RESP_CODE_OK;
|
||||
uint8_t value = board.isLoRaFemLnaEnabled() ? 1 : 0;
|
||||
memcpy(&out_frame[1], &value, 1);
|
||||
_serial->writeFrame(out_frame, 2);
|
||||
}
|
||||
} else if (cmd_frame[0] == CMD_SET_RADIO_FEM_RXGAIN && len >= 2) {
|
||||
uint8_t value = cmd_frame[1];
|
||||
if (!board.canControlLoRaFemLna()) {
|
||||
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
|
||||
} else if (value <= 1) {
|
||||
_prefs.radio_fem_rxgain = value;
|
||||
if (board.setLoRaFemLnaEnabled(value != 0)) {
|
||||
savePrefs();
|
||||
writeOKFrame();
|
||||
} else {
|
||||
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
|
||||
}
|
||||
} else {
|
||||
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
||||
}
|
||||
} else if (cmd_frame[0] == CMD_GET_ADVERT_PATH && len >= PUB_KEY_SIZE+2) {
|
||||
// FUTURE use: uint8_t reserved = cmd_frame[1];
|
||||
uint8_t *pub_key = &cmd_frame[2];
|
||||
|
||||
@@ -2,6 +2,11 @@
|
||||
#include <Mesh.h>
|
||||
#include "MyMesh.h"
|
||||
|
||||
#ifdef ESP32_PLATFORM
|
||||
#include "esp_pm.h"
|
||||
#include "esp_bt.h"
|
||||
#endif
|
||||
|
||||
// Believe it or not, this std C function is busted on some platforms!
|
||||
static uint32_t _atoi(const char* sp) {
|
||||
uint32_t n = 0;
|
||||
@@ -240,6 +245,37 @@ void setup() {
|
||||
#endif
|
||||
|
||||
board.onBootComplete();
|
||||
|
||||
#ifdef ESP32_PLATFORM
|
||||
#if !CONFIG_IDF_TARGET_ESP32C6
|
||||
// Enable BLE sleep
|
||||
esp_err_t errBLESleep = esp_bt_sleep_enable();
|
||||
if (errBLESleep == ESP_OK) {
|
||||
Serial.println("Bluetooth sleep enabled successfully");
|
||||
} else {
|
||||
Serial.printf("Bluetooth sleep enable failed: %s\n", esp_err_to_name(errBLESleep));
|
||||
}
|
||||
#endif
|
||||
|
||||
#if CONFIG_IDF_TARGET_ESP32C3
|
||||
esp_pm_config_esp32c3_t pm_config;
|
||||
#elif CONFIG_IDF_TARGET_ESP32S3
|
||||
esp_pm_config_esp32s3_t pm_config;
|
||||
#elif CONFIG_IDF_TARGET_ESP32
|
||||
esp_pm_config_esp32_t pm_config;
|
||||
#elif CONFIG_IDF_TARGET_ESP32C6
|
||||
esp_pm_config_t pm_config;
|
||||
#endif
|
||||
|
||||
// Configure Power Management
|
||||
pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = true };
|
||||
esp_err_t errPM = esp_pm_configure(&pm_config);
|
||||
if (errPM == ESP_OK) {
|
||||
Serial.println("Power Management configured successfully");
|
||||
} else {
|
||||
Serial.printf("Power Management failed to configure: %d\r\n", errPM);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void loop() {
|
||||
@@ -253,6 +289,10 @@ void loop() {
|
||||
if (!the_mesh.hasPendingWork()) {
|
||||
#if defined(NRF52_PLATFORM)
|
||||
board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
|
||||
#elif defined(ESP32_PLATFORM)
|
||||
if (!serial_interface.isReadBusy() && !serial_interface.isWriteBusy()) { // BLE is not busy
|
||||
vTaskDelay(pdMS_TO_TICKS(10)); // attempt to sleep
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@@ -697,8 +697,7 @@ void UITask::shutdown(bool restart){
|
||||
if (restart) {
|
||||
_board->reboot();
|
||||
} else {
|
||||
_display->turnOff();
|
||||
radio_driver.powerOff();
|
||||
// Power off board including radio, display, GPS and components
|
||||
_board->powerOff();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -307,7 +307,7 @@ void UITask::shutdown(bool restart){
|
||||
if (restart) {
|
||||
_board->reboot();
|
||||
} else {
|
||||
radio_driver.powerOff();
|
||||
// Power off board including radio, display, GPS and components
|
||||
_board->powerOff();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -566,8 +566,7 @@ void UITask::shutdown(bool restart){
|
||||
if (restart) {
|
||||
_board->reboot();
|
||||
} else {
|
||||
_display->turnOff();
|
||||
radio_driver.powerOff();
|
||||
// Power off board including radio, display, GPS and components
|
||||
_board->powerOff();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -676,7 +676,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
|
||||
mesh::Packet *reply =
|
||||
createDatagram(PAYLOAD_TYPE_RESPONSE, client->id, secret, reply_data, reply_len);
|
||||
if (reply) {
|
||||
if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT
|
||||
if (mesh::Packet::isValidPathLen(client->out_path_len)) { // we have an out_path, so send DIRECT
|
||||
sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY);
|
||||
} else {
|
||||
sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
|
||||
@@ -709,10 +709,10 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
|
||||
|
||||
mesh::Packet *ack = createAck(ack_hash);
|
||||
if (ack) {
|
||||
if (client->out_path_len == OUT_PATH_UNKNOWN) {
|
||||
sendFloodReply(ack, TXT_ACK_DELAY, packet->getPathHashSize());
|
||||
} else {
|
||||
if (mesh::Packet::isValidPathLen(client->out_path_len)) {
|
||||
sendDirect(ack, client->out_path, client->out_path_len, TXT_ACK_DELAY);
|
||||
} else {
|
||||
sendFloodReply(ack, TXT_ACK_DELAY, packet->getPathHashSize());
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -723,7 +723,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
|
||||
if (is_retry) {
|
||||
*reply = 0;
|
||||
} else {
|
||||
handleCommand(sender_timestamp, command, reply);
|
||||
handleCommand(sender_timestamp, client, command, reply);
|
||||
}
|
||||
int text_len = strlen(reply);
|
||||
if (text_len > 0) {
|
||||
@@ -737,10 +737,10 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx,
|
||||
|
||||
auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, secret, temp, 5 + text_len);
|
||||
if (reply) {
|
||||
if (client->out_path_len == OUT_PATH_UNKNOWN) {
|
||||
sendFloodReply(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize());
|
||||
} else {
|
||||
if (mesh::Packet::isValidPathLen(client->out_path_len)) {
|
||||
sendDirect(reply, client->out_path, client->out_path_len, CLI_REPLY_DELAY_MILLIS);
|
||||
} else {
|
||||
sendFloodReply(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize());
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -760,7 +760,9 @@ bool MyMesh::onPeerPathRecv(mesh::Packet *packet, int sender_idx, const uint8_t
|
||||
auto client = acl.getClientByIdx(i);
|
||||
|
||||
// store a copy of path, for sendDirect()
|
||||
client->out_path_len = mesh::Packet::copyPath(client->out_path, path, path_len);
|
||||
if (client->out_path_len != OUT_PATH_FORCE_FLOOD) {
|
||||
client->out_path_len = mesh::Packet::copyPath(client->out_path, path, path_len);
|
||||
}
|
||||
client->last_activity = getRTCClock()->getCurrentTime();
|
||||
} else {
|
||||
MESH_DEBUG_PRINTLN("onPeerPathRecv: invalid peer idx: %d", i);
|
||||
@@ -1174,7 +1176,108 @@ void MyMesh::clearStats() {
|
||||
((SimpleMeshTables *)getTables())->resetStats();
|
||||
}
|
||||
|
||||
void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply) {
|
||||
static char* trimSpaces(char* s) {
|
||||
while (*s == ' ') s++;
|
||||
char* end = s + strlen(s);
|
||||
while (end > s && end[-1] == ' ') end--;
|
||||
*end = 0;
|
||||
return s;
|
||||
}
|
||||
|
||||
static bool parsePathCommand(char* raw, uint8_t* out_path, uint8_t& out_path_len, const char*& err) {
|
||||
if (raw == NULL || out_path == NULL) {
|
||||
err = "Err - bad params";
|
||||
return false;
|
||||
}
|
||||
|
||||
char* spec = trimSpaces(raw);
|
||||
if (*spec == 0) {
|
||||
err = "Err - missing path";
|
||||
return false;
|
||||
}
|
||||
if (strcmp(spec, "clear") == 0 || strcmp(spec, "-") == 0 || strcmp(spec, "none") == 0) {
|
||||
out_path_len = OUT_PATH_UNKNOWN;
|
||||
return true;
|
||||
}
|
||||
if (strcmp(spec, "flood") == 0) {
|
||||
out_path_len = OUT_PATH_FORCE_FLOOD;
|
||||
return true;
|
||||
}
|
||||
if (strcmp(spec, "direct") == 0) {
|
||||
out_path_len = 0;
|
||||
return true;
|
||||
}
|
||||
|
||||
uint8_t hash_size = 0;
|
||||
uint8_t hop_count = 0;
|
||||
char* token = spec;
|
||||
while (token && *token) {
|
||||
char* comma = strchr(token, ',');
|
||||
if (comma) *comma = 0;
|
||||
token = trimSpaces(token);
|
||||
|
||||
int hex_len = strlen(token);
|
||||
if (!(hex_len == 2 || hex_len == 4 || hex_len == 6)) {
|
||||
err = "Err - bad params";
|
||||
return false;
|
||||
}
|
||||
|
||||
uint8_t hop_hash_size = (uint8_t)(hex_len / 2);
|
||||
if (hash_size == 0) {
|
||||
hash_size = hop_hash_size;
|
||||
} else if (hash_size != hop_hash_size) {
|
||||
err = "Err - bad params";
|
||||
return false;
|
||||
}
|
||||
|
||||
if (hop_count >= 63 || (hop_count + 1) * hash_size > MAX_PATH_SIZE) {
|
||||
err = "Err - bad params";
|
||||
return false;
|
||||
}
|
||||
if (!mesh::Utils::fromHex(&out_path[hop_count * hash_size], hash_size, token)) {
|
||||
err = "Err - bad hex";
|
||||
return false;
|
||||
}
|
||||
|
||||
hop_count++;
|
||||
token = comma ? comma + 1 : NULL;
|
||||
}
|
||||
|
||||
if (hash_size == 0 || hop_count == 0) {
|
||||
err = "Err - missing path";
|
||||
return false;
|
||||
}
|
||||
out_path_len = ((hash_size - 1) << 6) | (hop_count & 63);
|
||||
return true;
|
||||
}
|
||||
|
||||
static void formatPathReply(const uint8_t* path, uint8_t path_len, char* out, size_t out_len) {
|
||||
if (path_len == OUT_PATH_FORCE_FLOOD) {
|
||||
snprintf(out, out_len, "> flood");
|
||||
return;
|
||||
}
|
||||
if (path_len == OUT_PATH_UNKNOWN) {
|
||||
snprintf(out, out_len, "> unknown");
|
||||
return;
|
||||
}
|
||||
if (!mesh::Packet::isValidPathLen(path_len)) {
|
||||
snprintf(out, out_len, "> invalid");
|
||||
return;
|
||||
}
|
||||
if ((path_len & 63) == 0) {
|
||||
snprintf(out, out_len, "> direct");
|
||||
return;
|
||||
}
|
||||
|
||||
uint8_t hash_size = (path_len >> 6) + 1;
|
||||
uint8_t hop_count = path_len & 63;
|
||||
uint8_t byte_len = hop_count * hash_size;
|
||||
char hex[(MAX_PATH_SIZE * 2) + 1];
|
||||
mesh::Utils::toHex(hex, path, byte_len);
|
||||
snprintf(out, out_len, "> hs=%u hops=%u hex=%s", (uint32_t)hash_size, (uint32_t)hop_count, hex);
|
||||
}
|
||||
|
||||
void MyMesh::handleCommand(uint32_t sender_timestamp, ClientInfo* sender, char *command, char *reply) {
|
||||
if (region_load_active) {
|
||||
if (StrHelper::isBlank(command)) { // empty/blank line, signal to terminate 'load' operation
|
||||
region_map = temp_map; // copy over the temp instance as new current map
|
||||
@@ -1251,6 +1354,34 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
|
||||
Serial.printf("\n");
|
||||
}
|
||||
reply[0] = 0;
|
||||
} else if (strcmp(command, "get outpath") == 0
|
||||
|| strcmp(command, "set outpath") == 0
|
||||
|| strncmp(command, "set outpath ", 12) == 0) {
|
||||
bool is_get = strncmp(command, "get ", 4) == 0;
|
||||
if (sender == NULL) {
|
||||
strcpy(reply, "Err - command needs remote client context");
|
||||
} else if (is_get) {
|
||||
formatPathReply(sender->out_path, sender->out_path_len, reply, 160);
|
||||
} else {
|
||||
char* spec = command + 11; // length of "set outpath"
|
||||
if (*spec == ' ') spec++;
|
||||
|
||||
uint8_t path[MAX_PATH_SIZE];
|
||||
uint8_t path_len = OUT_PATH_UNKNOWN;
|
||||
const char* err = NULL;
|
||||
if (!parsePathCommand(spec, path, path_len, err)) {
|
||||
strcpy(reply, err ? err : "Err - invalid path");
|
||||
} else {
|
||||
if (path_len == OUT_PATH_UNKNOWN || path_len == OUT_PATH_FORCE_FLOOD) {
|
||||
memset(sender->out_path, 0, sizeof(sender->out_path));
|
||||
sender->out_path_len = path_len;
|
||||
} else {
|
||||
sender->out_path_len = mesh::Packet::copyPath(sender->out_path, path, path_len);
|
||||
}
|
||||
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
||||
formatPathReply(sender->out_path, sender->out_path_len, reply, 160);
|
||||
}
|
||||
}
|
||||
} else if (memcmp(command, "discover.neighbors", 18) == 0) {
|
||||
const char* sub = command + 18;
|
||||
while (*sub == ' ') sub++;
|
||||
|
||||
@@ -122,7 +122,7 @@ void loop() {
|
||||
Serial.print('\n');
|
||||
command[len - 1] = 0; // replace newline with C string null terminator
|
||||
char reply[160];
|
||||
the_mesh.handleCommand(0, command, reply); // NOTE: there is no sender_timestamp via serial!
|
||||
the_mesh.handleCommand(0, NULL, command, reply); // NOTE: there is no sender_timestamp via serial!
|
||||
if (reply[0]) {
|
||||
Serial.print(" -> "); Serial.println(reply);
|
||||
}
|
||||
@@ -161,4 +161,9 @@ void loop() {
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
if (the_mesh.getNodePrefs()->reboot_interval > 0 &&
|
||||
the_mesh.millisHasNowPassed(the_mesh.getNodePrefs()->reboot_interval * 3600000)) {
|
||||
board.reboot();
|
||||
}
|
||||
}
|
||||
@@ -1031,3 +1031,11 @@ void MyMesh::loop() {
|
||||
uptime_millis += now - last_millis;
|
||||
last_millis = now;
|
||||
}
|
||||
|
||||
// To check if there is pending work
|
||||
bool MyMesh::hasPendingWork() const {
|
||||
#if defined(WITH_BRIDGE)
|
||||
if (bridge.isRunning()) return true; // bridge needs WiFi radio, can't sleep
|
||||
#endif
|
||||
return _mgr->getOutboundTotal() > 0;
|
||||
}
|
||||
Reference in new issue
Block a user