Merge remote-tracking branch 'IoTThinks/PowerSaving-v16' into keymindCascade
# Conflicts: # build-iotthinks.sh # build.sh # examples/simple_repeater/MyMesh.h # src/helpers/CommonCLI.cpp # variants/heltec_ct62/platformio.ini # variants/heltec_t096/T096Board.cpp # variants/heltec_t096/platformio.ini # variants/heltec_tracker/platformio.ini # variants/heltec_tracker_v2/platformio.ini # variants/heltec_v2/platformio.ini # variants/heltec_v3/HeltecV3Board.h # variants/heltec_v3/platformio.ini # variants/heltec_v4/HeltecV4Board.cpp # variants/heltec_v4/platformio.ini # variants/heltec_wireless_paper/platformio.ini # variants/lilygo_tbeam_1w/platformio.ini # variants/lilygo_tbeam_SX1262/platformio.ini # variants/lilygo_tbeam_SX1276/platformio.ini # variants/lilygo_tbeam_supreme_SX1262/platformio.ini # variants/lilygo_tlora_v2_1/platformio.ini # variants/xiao_c3/platformio.ini # variants/xiao_s3_wio/platformio.ini
This commit is contained in:
commit
d9cefed1b1
96 files changed
+757
-878
No files matched your search
@@ -232,6 +232,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### View or change the boosted receive gain mode
|
||||
**Usage:**
|
||||
- `get radio.rxgain`
|
||||
- `set radio.rxgain <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
**Note:** Only available on SX1262 and SX1268 based boards.
|
||||
|
||||
---
|
||||
|
||||
#### Change the radio parameters for a set duration
|
||||
**Usage:**
|
||||
- `tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>`
|
||||
@@ -444,6 +458,18 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### View or set reboot interval (Repeater and room server)
|
||||
**Usage:**
|
||||
- `get reboot.interval`
|
||||
- `set reboot.interval <hours>`
|
||||
|
||||
**Parameters:**
|
||||
- `hours`: 0-255. 0 is disabled
|
||||
|
||||
**Default:** `0` (disabled)
|
||||
|
||||
---
|
||||
|
||||
### Routing
|
||||
|
||||
#### View or change this node's repeat flag
|
||||
@@ -804,6 +830,27 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### View or set the direct path override for the current remote client
|
||||
**Usage:**
|
||||
- `get outpath`
|
||||
- `set outpath <hop1_hex,hop2_hex,...>`
|
||||
- `set outpath direct`
|
||||
- `set outpath clear`
|
||||
- `set outpath flood`
|
||||
|
||||
**Parameters:**
|
||||
- `hopN_hex`: Hop hash, `2`, `4`, or `6` hex characters. All hops must use the same width.
|
||||
|
||||
**Notes:**
|
||||
- These commands require remote client context (they target the caller's ACL entry).
|
||||
- The path hash size is inferred from the hop hash width.
|
||||
- `outpath` overrides the primary direct route used for replies to the caller.
|
||||
- `direct` sets a zero-hop direct route for a caller reachable without repeaters.
|
||||
- `clear` forgets the current direct path and allows normal path discovery to repopulate it.
|
||||
- `flood` forces replies to use flood packets until the client logs in again.
|
||||
|
||||
---
|
||||
|
||||
#### Create a new region
|
||||
**Usage:**
|
||||
- `region put <name> [parent_name]`
|
||||
|
||||
Reference in new issue
Block a user