From d322bea2f33a9078775e4070a448b9acc483ab52 Mon Sep 17 00:00:00 2001 From: silverphish-io <50057415+silverphish-io@users.noreply.github.com> Date: Thu, 25 Sep 2025 14:59:25 +0100 Subject: [PATCH] Update faq.md --- docs/faq.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/faq.md b/docs/faq.md index efed5a864..38a552c23 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -186,7 +186,7 @@ The T-Deck firmware is free to download and most features are available without - Canada and USA are on **910.525MHz** - For other regions and countries, please check your local LoRa frequency -In UK and EU, 867.5MHz is not allowed to use 250kHz bandwidth and it only allows 2.5% duty cycle for clients. 869.525Mhz allows an airtime of 10%, 250KHz bandwidth, and a higher EIRP, therefore MeshCore nodes can send more often and with more power. That is why this frequency is chosen for UK and EU. This is also why Meshtastic also uses this frequency. +In UK and EU, 867.5MHz is not allowed to use 250kHz bandwidth and it only allows 2.5% duty cycle for clients. 869.525Mhz allows an airtime of 10%, 250KHz bandwidth, and a higher Effective Isotropic Radiated Power (EIRP), therefore MeshCore nodes can send more often and with more power. That is why this frequency is chosen for UK and EU. This is also why Meshtastic also uses this frequency. [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1356540643853209641) @@ -558,7 +558,7 @@ From here, reference repeater and room server command line commands on MeshCore **A:** Yes. See the following: #### 5.14.1. meshcoremqtt -A Python script to send meshore debug and packet capture data to MQTT for analysis +A Python script to send meshcore debug and packet capture data to MQTT for analysis https://github.com/Andrew-a-g/meshcoretomqtt #### 5.14.2. MeshCore for Home Assistant