diff --git a/lib/PsychicMqttClient/src/PsychicMqttClient.cpp b/lib/PsychicMqttClient/src/PsychicMqttClient.cpp
index 2ae395c8..69cb35b1 100644
--- a/lib/PsychicMqttClient/src/PsychicMqttClient.cpp
+++ b/lib/PsychicMqttClient/src/PsychicMqttClient.cpp
@@ -529,10 +529,30 @@ int PsychicMqttClient::publish(const char *topic, int qos, bool retain, const ch
 
     if (async)
     {
+        // QoS0 async publishes are stored in the esp-mqtt outbox (store=true) so that
+        // packet topics keep flowing — enqueue(store=false) produced false-failure
+        // semantics that stalled the packet path. The outbox has no size bound of its
+        // own (esp-mqtt frees entries only on send-ack or time-based expiry), so on a
+        // stalled uplink QoS0 frames pile up on internal heap without limit. Cap it
+        // here: if the outbox is already at/over _outbox_limit, drop this QoS0 message
+        // and report -2 ("outbox full") so the caller can retry/drop. QoS1/2 (durable,
+        // low-rate) are never gated.
+        if (qos == 0 && _outbox_limit > 0 && _client != nullptr &&
+            esp_mqtt_client_get_outbox_size(_client) >= _outbox_limit)
+        {
+            _outbox_drops++;
+            static unsigned long last_full_log = 0;
+            unsigned long now = millis();
+            if (now - last_full_log > 5000)
+            {
+                ESP_LOGW(TAG, "Outbox at cap (%u bytes); dropping QoS0 message to topic %s",
+                         (unsigned)_outbox_limit, topic);
+                last_full_log = now;
+            }
+            return -2;
+        }
+
         ESP_LOGV(TAG, "Enqueuing message to topic %s with QoS %d", topic, qos);
-        // Hotfix: restore legacy outbox behavior for QoS0 async publishes.
-        // This avoids false-failure semantics from enqueue(store=false) on some
-        // connected paths where packet topics stop flowing.
         bool store_in_outbox = true;
         return esp_mqtt_client_enqueue(_client, topic, payload, length, qos, retain, store_in_outbox);
     }
@@ -557,6 +577,30 @@ esp_mqtt_client_config_t *PsychicMqttClient::getMqttConfig()
     return &_mqtt_cfg;
 }
 
+PsychicMqttClient &PsychicMqttClient::setOutboxLimit(size_t bytes)
+{
+    _outbox_limit = bytes;
+    return *this;
+}
+
+size_t PsychicMqttClient::getOutboxSize()
+{
+    if (_client == nullptr)
+        return 0;
+    int size = esp_mqtt_client_get_outbox_size(_client);
+    return size > 0 ? (size_t)size : 0;
+}
+
+size_t PsychicMqttClient::getOutboxLimit()
+{
+    return _outbox_limit;
+}
+
+unsigned long PsychicMqttClient::getOutboxDrops()
+{
+    return _outbox_drops;
+}
+
 void PsychicMqttClient::_onMqttEventStatic(void *handler_args, esp_event_base_t base, int32_t event_id, void *event_data)
 {
     // Since this is a static function, we need to cast the first argument (void*) back to the class instance type
diff --git a/lib/PsychicMqttClient/src/PsychicMqttClient.h b/lib/PsychicMqttClient/src/PsychicMqttClient.h
index c45cf272..a9e273ba 100644
--- a/lib/PsychicMqttClient/src/PsychicMqttClient.h
+++ b/lib/PsychicMqttClient/src/PsychicMqttClient.h
@@ -410,6 +410,42 @@ public:
      */
     esp_mqtt_client_config_t *getMqttConfig();
 
+    /**
+     * @brief Caps the size of the esp-mqtt outbox for async QoS 0 publishes.
+     *
+     * QoS 0 async publishes are forced into the esp-mqtt outbox (store=true) so
+     * packet topics keep flowing, but the outbox has no size bound of its own —
+     * it only frees entries on send-ack or time-based expiry. On a stalled uplink
+     * the entries accumulate on internal heap without limit. When the current
+     * outbox size is at/over this cap, publish() drops the new QoS 0 message
+     * (returns -2) instead of enqueuing it, applying backpressure. 0 disables the
+     * cap. QoS 1/2 publishes are never gated by this.
+     *
+     * @param bytes Maximum outbox size in bytes, or 0 to disable.
+     * @return A reference to the PsychicMqttClient instance.
+     */
+    PsychicMqttClient &setOutboxLimit(size_t bytes);
+
+    /**
+     * @brief Returns the current esp-mqtt outbox size in bytes (0 if the client
+     * is not initialized). Useful for diagnostics/backpressure monitoring.
+     *
+     * @return Current outbox size in bytes.
+     */
+    size_t getOutboxSize();
+
+    /**
+     * @brief Returns the configured outbox cap in bytes (0 = disabled). Lets
+     * callers confirm the cap is actually applied to this client.
+     */
+    size_t getOutboxLimit();
+
+    /**
+     * @brief Returns the cumulative count of QoS0 messages dropped because the
+     * outbox was at/over the cap. Monotonic; useful for backpressure diagnostics.
+     */
+    unsigned long getOutboxDrops();
+
 private:
     esp_mqtt_client_handle_t _client = nullptr;
     esp_mqtt_client_config_t _mqtt_cfg;
@@ -418,6 +454,12 @@ private:
     bool _stopMqttClient = false;
     bool _config_dirty = true;
 
+    // Runtime cap on the esp-mqtt outbox for QoS 0 async publishes (bytes).
+    // 0 = disabled. Enforced in publish(); not an esp-mqtt config field.
+    size_t _outbox_limit = 0;
+    // Cumulative count of QoS0 publishes dropped because the outbox hit the cap.
+    unsigned long _outbox_drops = 0;
+
     // Multipart message reassembly. _buffer is lazily allocated at connect() time
     // to match the configured buffer size, then reused for the client's lifetime.
     // _topic is inline storage, never heap-allocated.
diff --git a/src/helpers/bridges/MQTTBridge.cpp b/src/helpers/bridges/MQTTBridge.cpp
index aa737d98..1e9b218c 100644
--- a/src/helpers/bridges/MQTTBridge.cpp
+++ b/src/helpers/bridges/MQTTBridge.cpp
@@ -898,6 +898,16 @@ void MQTTBridge::mqttTaskLoop() {
     #endif
 
     unsigned long now = millis();
+
+    // Periodic heap + outbox snapshot (compiles to nothing unless MQTT_DEBUG is set).
+    // Outbox= is the value to watch: it should sit near 0 on a healthy uplink and
+    // plateau at the configured cap (not climb) during a stall.
+    static unsigned long last_mem_log = 0;
+    if (now - last_mem_log >= 30000) {
+      last_mem_log = now;
+      logMemoryStatus();
+    }
+
     bool wifi_just_connected = handleWiFiConnection(now);
     if (wifi_just_connected) {
       // WiFi recovered — reset last_reconnect_attempt for disconnected slots so they
@@ -1742,13 +1752,16 @@ bool MQTTBridge::publishToSlot(int index, const char* topic, const char* payload
     return false;
   }
 
-  // QoS 0 for the high-rate packet/raw publish paths: no PUBACK, no outbox store,
-  // no per-message heap alloc — critical for non-PSRAM fragmentation. QoS 1 is used
-  // only for low-rate retained status messages where delivery matters.
+  // QoS 0 for the high-rate packet/raw publish paths: no PUBACK, so delivery is
+  // best-effort. These still enter the esp-mqtt outbox (store=true, needed so packet
+  // topics keep flowing), but the client bounds that outbox via setOutboxLimit() to
+  // stop QoS0 frames accumulating on internal heap during a stalled uplink — over the
+  // cap, publish() returns -2 and the queue retry/drop path below handles it. QoS 1 is
+  // used only for low-rate retained status messages where delivery matters.
   //
   // esp_mqtt_client_enqueue return convention: QoS 0 returns msg_id == 0 on success
   // (no tracking since there's no PUBACK); QoS 1/2 return a positive msg_id. Negative
-  // values (-1 generic failure, -2 outbox full) are the only actual failures.
+  // values (-1 generic failure, -2 outbox full / over cap) are the only actual failures.
   int result = slot.client->publish(topic, qos, retained, payload, strlen(payload), true);
   if (result < 0) {
     // QoS0 packet/raw publishes are best-effort and may be retried from the
@@ -3408,6 +3421,22 @@ void MQTTBridge::optimizeMqttClientConfig(PsychicMqttClient* client, bool needs_
 
   client->setBufferSize(MQTT_CLIENT_BUFFER_SIZE);
 
+  // Bound the esp-mqtt outbox for high-rate QoS0 packet/raw publishes. Those go in
+  // with store=true (so packet topics keep flowing) but the outbox has no size limit
+  // of its own — it frees entries only on send-ack or ~30s expiry, so a stalled uplink
+  // lets QoS0 frames accumulate on internal heap without bound. Above this cap the
+  // client drops the new QoS0 message (returns -2), and processPacketQueue's existing
+  // retry/drop path applies backpressure. Non-PSRAM is the fragmentation-sensitive case
+  // (outbox lives on internal heap), so it gets the tighter cap. Under healthy operation
+  // the outbox drains to ~0 in ms, so this only bites during a stall. Note: esp-mqtt's
+  // own outbox.limit config is not used — its enqueue path does not reliably enforce it
+  // for QoS0, and this app-level guard fires before enqueue regardless of IDF version.
+#if defined(BOARD_HAS_PSRAM)
+  client->setOutboxLimit(16384);
+#else
+  client->setOutboxLimit(8192);
+#endif
+
   // Access ESP-IDF config to optimize additional settings
   esp_mqtt_client_config_t* config = client->getMqttConfig();
   if (config) {
@@ -3425,8 +3454,30 @@ void MQTTBridge::optimizeMqttClientConfig(PsychicMqttClient* client, bool needs_
 }
 
 void MQTTBridge::logMemoryStatus() {
-  MQTT_DEBUG_PRINTLN("Memory: Free=%d, Max=%d, Queue=%d/%d",
-                     ESP.getFreeHeap(), ESP.getMaxAllocHeap(), _queue_count, MAX_QUEUE_SIZE);
+  // The esp-mqtt outbox is the structure that grew unbounded before the cap. The cap
+  // (setOutboxLimit) is enforced PER CLIENT, so log it per slot — a summed total hides
+  // whether any single slot has blown past its cap. Each entry is size/limit; drops is
+  // the cumulative count of QoS0 messages rejected at the cap (backpressure firing).
+  // Under a healthy uplink size sits near 0; under a stall/saturation it should plateau
+  // at limit (not climb) and drops should increase.
+  char outbox_detail[160];
+  size_t pos = 0;
+  size_t outbox_total = 0;
+  outbox_detail[0] = '\0';
+  for (int i = 0; i < RUNTIME_MQTT_SLOTS; i++) {
+    if (_slots[i].client) {
+      size_t sz = _slots[i].client->getOutboxSize();
+      outbox_total += sz;
+      pos += snprintf(outbox_detail + pos, sizeof(outbox_detail) - pos, "%ss%d=%u/%u(d%lu)",
+                      pos ? " " : "", i, (unsigned)sz,
+                      (unsigned)_slots[i].client->getOutboxLimit(),
+                      _slots[i].client->getOutboxDrops());
+      if (pos >= sizeof(outbox_detail)) break;
+    }
+  }
+  MQTT_DEBUG_PRINTLN("Memory: Free=%d, Max=%d, Queue=%d/%d, Outbox=%u [%s]",
+                     ESP.getFreeHeap(), ESP.getMaxAllocHeap(), _queue_count, MAX_QUEUE_SIZE,
+                     (unsigned)outbox_total, outbox_detail);
 }
 
 // ---------------------------------------------------------------------------