Honor saved WebUI off during unconfigured boot setup
An enabled MQTT bridge without a saved SSID forced WebConfig back on at boot, even after set webui off. Its setup AP also suspended an enabled ESP-NOW bridge. Use first-time MQTT setup as the default only when no WebUI choice is saved. Apply the saved on/off setting afterward in Repeater and Room Server. Preserve first-time provisioning and explicit starts. Add executable boot regressions for both roles with unset, on and off WebUI settings and configured/unconfigured WiFi. Update setup and picker guidance.
This commit is contained in:
1 parent
16399a019d
commit
af69918094
7 files changed
+87
-20
No files matched your search
@@ -326,7 +326,10 @@ folder transport.
|
||||
again after future reboots; `set webui off` closes it and disables that boot
|
||||
start. `get webui` reports the saved on/off state plus whether the portal is
|
||||
inactive, joining WiFi, serving a setup AP, or serving a LAN URL. The default is
|
||||
`off` on repeater and room-server builds. On display-equipped repeaters, an
|
||||
`off` on repeater and room-server builds. An unconfigured MQTT node can open
|
||||
first-time setup while no WebUI choice has been saved. An explicit
|
||||
`set webui off` prevents that AP from returning after reboot and pausing
|
||||
ESP-NOW. On display-equipped repeaters, an
|
||||
otherwise-unused triple click toggles the same saved setting.
|
||||
Consequently, `> off, http://192.168.1.130/` means the saved boot setting is
|
||||
off while a temporary WebConfig session is currently active at that URL.
|
||||
@@ -355,9 +358,10 @@ saved `webui on`.)
|
||||
LAN mode otherwise remains active until reboot. On expanded FULL builds, an
|
||||
unconfigured automatic setup AP receives one absolute 30-minute window per
|
||||
boot, then powers WiFi off even if a client remains attached; rebooting starts
|
||||
a new automatic window. An administrator can explicitly run `start webconfig`
|
||||
again without rebooting. Once an SSID is saved, the cutoff no longer applies
|
||||
and the selected WiFi/MQTT mode keeps reconnecting. Other setup sessions retain
|
||||
a new automatic window unless `webui off` is saved. An administrator can
|
||||
explicitly run `start webconfig` again without rebooting. Once an SSID is saved,
|
||||
the cutoff no longer applies and the selected WiFi/MQTT mode keeps reconnecting.
|
||||
Other setup sessions retain
|
||||
their profile's idle timeout.
|
||||
|
||||
Full Repeater and Room Server suspend unconfigured network bridges during
|
||||
|
||||
Reference in new issue
Block a user