Merge remote-tracking branch 'upstream/dev' into HEAD
This commit is contained in:
commit
ae10246afe
32 files changed
+264
-58
No files matched your search
@@ -286,6 +286,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### View or change the LoRa FEM receive-path gain state on supported boards
|
||||
**Usage:**
|
||||
- `get radio.fem.rxgain`
|
||||
- `set radio.fem.rxgain <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Notes:**
|
||||
- This controls the external LoRa FEM receive-path LNA where the board supports it.
|
||||
- This is separate from `radio.rxgain`, which controls the radio chip receive gain mode.
|
||||
|
||||
---
|
||||
|
||||
### System
|
||||
|
||||
#### View or change this node's name
|
||||
@@ -587,6 +601,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### Enable or disable hardware Channel Activity Detection (CAD)
|
||||
**Usage:**
|
||||
- `get cad`
|
||||
- `set cad <on|off>`
|
||||
|
||||
**Description:** When enabled, the radio performs a hardware Channel Activity Detection scan before transmitting and defers if the channel is busy. Runs independently of `int.thresh` — either, both, or none may be active.
|
||||
|
||||
**Parameters:**
|
||||
- `on|off`: Enable or disable hardware CAD
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the AGC Reset Interval
|
||||
**Usage:**
|
||||
- `get agc.reset.interval`
|
||||
|
||||
Reference in new issue
Block a user