Sync repeater GPS weekly in power saving mode

This commit is contained in:
mikecarper committed 2026-09-16 22:42:51 -07:00
1 parent fd920624a2
commit aaa2b8b4e3
3 files changed
+14 -2

No files matched your search

+5
View File
@@ -4302,6 +4302,11 @@ The GPS must be enabled. When GPS power saving has put an enabled receiver to
sleep, this command schedules a sync and wakes it; after `set gps off`, it reports
`gps is off` without scheduling work.
On repeaters with device power saving enabled, the automatic GPS cycle wakes
for up to 10 minutes and repeats seven days after GPS sleeps. A valid GPS time
can correct the RTC either forward or backward. With device power saving off,
an enabled GPS refreshes the RTC every 30 minutes.
---
#### Set this node's location based on the GPS coordinates
+6
View File
@@ -51,6 +51,12 @@ the next request can return that fix without another wake. `gps off` also
cancels an acquisition already in progress. An acquisition that never obtains a
fix retains the normal 15-minute safety timeout.
When GPS and device power saving are both enabled, a repeater wakes GPS for up
to 10 minutes to obtain a valid time and then sleeps it for seven days. A valid
GPS time may correct the RTC either forward or backward. With device power
saving off, an enabled GPS remains active and refreshes the RTC every 30
minutes.
## Companion/Client Nodes
Companion/client telemetry uses the existing companion telemetry permission