Add altpath replies and flood channel hop gates

This commit is contained in:
mikecarper committed 2026-07-06 17:10:53 -07:00
1 parent f747f96739
commit 9908d2b73e
6 files changed
+349 -66

No files matched your search

+39 -9
View File
@@ -781,9 +781,11 @@ send text.flood checking ridge link
**Forwarding behavior:** Repeater firmware only. The repeater still receives and
logs the packet when logging is enabled; this only blocks retransmission.
This is checked before `flood.channel.block` and applies to every flood
`GRP_DATA` packet regardless of channel key. Flood group text (`GRP_TXT`) is
unaffected.
This is checked before `flood.channel.block` and applies to flood `GRP_DATA`
packets regardless of channel key, subject to `flood.channel.block.hops`.
Flood group text (`GRP_TXT`) is unaffected by this setting.
`get flood.channel.data` includes the active hop gate as `h=all` or `h>N`.
---
@@ -792,10 +794,12 @@ unaffected.
- `get flood.channel.block`
- `get flood.channel.block.<n>`
- `get flood.channel.block <name|8_hex_prefix>`
- `set flood.channel.block <key> <name>`
- `set flood.channel.block.<n> <key> <name>`
- `set flood.channel.block #channel`
- `set flood.channel.block.<n> #channel`
- `get flood.channel.block.hops`
- `set flood.channel.block <key> <name> [h=<all|1-7|default>]`
- `set flood.channel.block.<n> <key> <name> [h=<all|1-7|default>]`
- `set flood.channel.block #channel [h=<all|1-7|default>]`
- `set flood.channel.block.<n> #channel [h=<all|1-7|default>]`
- `set flood.channel.block.hops <all|1-7>`
- `del flood.channel.block.<n>`
- `del flood.channel.block <name|8_hex_prefix>`
@@ -803,8 +807,11 @@ unaffected.
- `n`: Slot number from `1` to `15`.
- `key`: 128-bit or 256-bit channel key as hex.
- `#channel`: Public hashtag channel name; derives the 128-bit channel key from the hashtag and is stored as the row name.
- `name`: Local label for hex-key rows. Not needed for `#channel`; any extra text after `#channel` is ignored.
- `name`: Local label for hex-key rows. Not needed for `#channel`; extra text after `#channel` is ignored unless it is a hop setting.
- `8_hex_prefix`: First 4 bytes of the derived channel hash, shown by single-entry `get`.
- `all`: Block matching flood channel packets at any received flood hop count.
- `1-7`: Maximum received flood path hash count to repeat. Matching packets over this hop count are blocked.
- `default`: Row inherits the global `flood.channel.block.hops` setting.
**Slot behavior:** Without `.n`, `set flood.channel.block` updates an existing
row with the same derived channel prefix or name, otherwise it uses the next
@@ -815,7 +822,26 @@ writes that slot.
flood `GRP_TXT` and `GRP_DATA` channel packets. The repeater still receives and
logs the packet, but it does not retransmit it when a configured block entry can
validate/decode it. If `flood.channel.data` is `off`, all flood `GRP_DATA`
packets are blocked before this per-channel check runs.
packets over the hop gate are blocked before this per-channel check runs.
**Hop gate:** `flood.channel.block.hops` defaults to `all`, which preserves the
original behavior. When set to `N` from `1` to `7`, both `flood.channel.data off`
and block rows that inherit the global setting only block packets whose received
flood path hash count is greater than `N`; packets at `N` hops or lower can
still repeat. For example, `set flood.channel.block.hops 1` repeats zero-hop and
one-hop matches but blocks two-hop and longer matches.
Each block row can override the global hop gate with `h=<all|1-7|default>`.
For example, `set flood.channel.block #wardriving h=3` blocks `#wardriving`
matches above three hops, while `set flood.channel.block #bot h=7` blocks
`#bot` matches above seven hops. Use `h=default` to make the row inherit the
global setting again.
`get flood.channel.block` includes the global default first, then adds per-row
overrides as `/h>N` or `/h=all`; inherited rows do not show a suffix. Single-row
`get` replies include that row's stored hop mode as `h=def`, `h=all`, or `h>N`.
List replies truncate displayed row names only when the full list would exceed
the remote-management response limit.
**Matching behavior:** Each block entry stores the first 4 bytes of the derived
channel hash for display and lookup. Current group packets carry only the first
@@ -829,7 +855,11 @@ MAC/decrypt.
```
set flood.channel.block #test
set flood.channel.block.2 9cd8fcf22a47333b591d96a2b848b73f #test
set flood.channel.block.hops 3
set flood.channel.block #wardriving h=3
set flood.channel.block #bot h=7
get flood.channel.block
get flood.channel.block.hops
get flood.channel.block #test
del flood.channel.block.2
```