Merge branch 'PowerSaving-v16-iotthinks' into halo-direct-path-retries

# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
#	examples/simple_repeater/MyMesh.h
#	src/Mesh.cpp
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	src/helpers/ESP32Board.h
This commit is contained in:
mikecarper committed 2026-06-15 15:36:50 -07:00
commit 942bc6d361
113 files changed
+981 -489

No files matched your search

+33
View File
@@ -505,6 +505,18 @@ This document provides an overview of CLI commands that can be sent to MeshCore
---
#### View or set reboot interval (Repeater and room server)
**Usage:**
- `get reboot.interval`
- `set reboot.interval <hours>`
**Parameters:**
- `hours`: 0-255. 0 is disabled
**Default:** `0` (disabled)
---
### Routing
#### View or change this node's repeat flag
@@ -1053,6 +1065,27 @@ This document provides an overview of CLI commands that can be sent to MeshCore
---
#### View or set the direct path override for the current remote client
**Usage:**
- `get outpath`
- `set outpath <hop1_hex,hop2_hex,...>`
- `set outpath direct`
- `set outpath clear`
- `set outpath flood`
**Parameters:**
- `hopN_hex`: Hop hash, `2`, `4`, or `6` hex characters. All hops must use the same width.
**Notes:**
- These commands require remote client context (they target the caller's ACL entry).
- The path hash size is inferred from the hop hash width.
- `outpath` overrides the primary direct route used for replies to the caller.
- `direct` sets a zero-hop direct route for a caller reachable without repeaters.
- `clear` forgets the current direct path and allows normal path discovery to repopulate it.
- `flood` forces replies to use flood packets until the client logs in again.
---
#### Create a new region
**Usage:**
- `region put <name> [parent_name]`