Keep classic ESP32 release profiles within their measured RAM budgets

test/test_release_ota_policy.sh

@@ -38,4 +38,54 @@ fi
 resolve_command_targets build-firmware rp_companion_radio_usb >/dev/null
 [ "${#RESOLVED_BUILD_TARGETS[@]}" = 1 ] || fail "explicit USB Companion was rejected"
 
+# The portable OTA overlay and the final neighbor overlay must agree: an
+# earlier build_unflags entry removes even a later definition in PlatformIO.
+for target in Generic_E22_sx1262_repeater_lora_ota_no_external_sensors \
+              Generic_E22_sx1268_repeater_lora_ota_no_external_sensors \
+              Heltec_v2_repeater_lora_ota_no_external_sensors \
+              Meshadventurer_sx1262_repeater_lora_ota_no_external_sensors \
+              Meshadventurer_sx1268_repeater_lora_ota_no_external_sensors \
+              Tbeam_SX1262_repeater_lora_ota_no_external_sensors \
+              Tbeam_SX1276_repeater_lora_ota_no_external_sensors; do
+  PIO_ENV_PLATFORM_BY_NAME[$target]=ESP32_PLATFORM
+  PLATFORMIO_BUILD_FLAGS=""
+  PLATFORMIO_BUILD_UNFLAGS=""
+  BUILD_PROFILE_FOR_TARGET=standard
+  ESP32_FULL_BUILD=0
+  apply_esp32_lora_ota_size_profile "$target"
+  apply_repeater_neighbor_capacity "$target"
+  [[ "$PLATFORMIO_BUILD_FLAGS" == *"-DMAX_NEIGHBOURS=50"* ]] \
+    || fail "$target lost its measured-safe neighbor capacity"
+  [[ "$PLATFORMIO_BUILD_UNFLAGS" != *"MAX_NEIGHBOURS=50"* ]] \
+    || fail "$target removed its selected neighbor capacity"
+  [[ "$PLATFORMIO_BUILD_FLAGS" == *"-DLIGHTWEIGHT_WIFI_OTA=1"* ]] \
+    || fail "$target lost WiFi OTA while fixing its RAM budget"
+done
+
+ESP32_FULL_BUILD=1
+BUILD_PROFILE_FOR_TARGET=full
+PACKET_LOGGING_OVERRIDE=on
+for pair in Tbeam_SX1262_repeater_observer_mqtt:31 \
+            Tbeam_SX1276_repeater_observer_mqtt:31 \
+            Generic_E22_sx1262_repeater_bridge_espnow:47 \
+            LilyGo_TLora_V2_1_1_6_repeater_bridge_espnow:47 \
+            LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt_:default; do
+  target=${pair%:*}
+  rules=${pair##*:}
+  PIO_ENV_PLATFORM_BY_NAME[$target]=ESP32_PLATFORM
+  PIO_ENV_FULL_BUILD_BY_NAME[$target]=1
+  PLATFORMIO_BUILD_FLAGS=""
+  PLATFORMIO_BUILD_UNFLAGS=""
+  apply_esp32_full_size_profile "$target"
+  apply_repeater_neighbor_capacity "$target"
+  [[ "$PLATFORMIO_BUILD_FLAGS" == *"-DMAX_NEIGHBOURS=50"* \
+     && "$PLATFORMIO_BUILD_UNFLAGS" != *"MAX_NEIGHBOURS=50"* ]] \
+    || fail "$target lost its Full profile neighbor capacity"
+  if [ "$rules" != default ]; then
+    [[ "$PLATFORMIO_BUILD_FLAGS" == *"-DFLOOD_PACKET_FILTER_SLOTS=$rules"* \
+       && "$PLATFORMIO_BUILD_UNFLAGS" != *"FLOOD_PACKET_FILTER_SLOTS=$rules"* ]] \
+      || fail "$target lost its Full profile rule capacity"
+  fi
+done
+
 echo "test_release_ota_policy: OK"