Harden marathon-tested OTA and hardware paths

Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
This commit is contained in:
mikecarper committed 2026-08-30 19:26:15 -07:00
1 parent f873e51b43
commit 8920c35da5
109 files changed
+18697 -1094

No files matched your search

+35 -2
View File
@@ -4,6 +4,10 @@
#include <Arduino.h>
#include <atomic>
#if defined(NRF52_PLATFORM)
#include "NonBlockingWriteStream.h"
#endif
#if defined(MESH_DUAL_CDC_LOGGING)
#if !defined(COMPANION_FEATURE_DEDICATED_USB_LOGGING) || \
!COMPANION_FEATURE_DEDICATED_USB_LOGGING
@@ -42,11 +46,30 @@ class NullUsbLoggingStream : public Stream {
static NullUsbLoggingStream null_usb_logging_stream;
static void setPlatformDebugOutputEnabled(bool enabled) {
#if defined(ESP32_PLATFORM) && defined(ENABLE_USB_INTERFACE)
// Arduino-ESP32 log_e()/ESP-IDF diagnostics otherwise write straight to
// the same UART/CDC stream used by Binary Companion. Keep that low-level
// route under the same runtime gate as MeshCore's own diagnostics.
Serial.setDebugOutput(enabled);
#else
(void)enabled;
#endif
}
#if defined(MESH_DUAL_CDC_LOGGING)
static bool dedicated_usb_logging_port_configured = false;
static bool dedicated_usb_logging_port_started = false;
static bool dedicated_usb_logging_port_connected = false;
static Adafruit_USBD_CDC dedicated_usb_logging_port;
static WholeRecordNonBlockingStream<>
nonblocking_dedicated_usb_logging_port(dedicated_usb_logging_port);
#elif defined(NRF52_PLATFORM)
// Single-CDC nRF52 roles need the same protection. In particular, BLE debug
// callbacks and packet logging write through usbLoggingPort() without going
// through MeshCore's formatted-debug helper.
static WholeRecordNonBlockingStream<>
nonblocking_primary_usb_logging_port(Serial);
#endif
bool isUsbLoggingEnabled() {
@@ -56,6 +79,7 @@ bool isUsbLoggingEnabled() {
void setUsbLoggingEnabled(bool enabled) {
usb_logging_enabled.store(enabled, std::memory_order_relaxed);
usb_logging_preference_known.store(true, std::memory_order_relaxed);
setPlatformDebugOutputEnabled(enabled);
}
bool saveUsbLoggingBootPreference(bool enabled) {
@@ -64,6 +88,11 @@ bool saveUsbLoggingBootPreference(bool enabled) {
}
void beginUsbLoggingPort() {
// setup() calls this once before role preferences are loaded and again
// afterwards. The first call silences framework diagnostics on a protected
// ESP32 Companion stream; setUsbLoggingEnabled() restores them only when the
// saved setting explicitly enables logging.
setPlatformDebugOutputEnabled(isUsbLoggingEnabled());
#if defined(MESH_DUAL_CDC_LOGGING)
if (dedicated_usb_logging_port_started
|| !usb_logging_preference_known.load(std::memory_order_relaxed)
@@ -109,12 +138,16 @@ void serviceUsbLoggingPort() {
Stream& usbLoggingPort() {
#if defined(MESH_DUAL_CDC_LOGGING)
if (isUsbLoggingEnabled() && dedicated_usb_logging_port_started) {
return dedicated_usb_logging_port;
return nonblocking_dedicated_usb_logging_port;
}
return null_usb_logging_stream;
#else
if (!isUsbLoggingEnabled()) return null_usb_logging_stream;
return Serial;
#if defined(NRF52_PLATFORM)
return nonblocking_primary_usb_logging_port;
#else
return Serial;
#endif
#endif
}