Apply busy radio settings and recover service starts automatically

Save valid busy RX, fast-switch and Companion tuple changes once, then
apply the latest accepted intent at a safe radio gap. Preserve checked-save
rollback, runtime RXEN intent, TempRadio ownership and exact remote reply
delivery. Repair failed preamble compensation without hiding uncertain saves.

Retry WebConfig, MQTT and NimBLE startup failures automatically. Preserve
explicit off choices, OTA ownership and the latest WiFi credentials through
cooperative shutdown. Add regression coverage and update command guides.

Validation: focused host transaction, rollback, ownership and lifecycle suites;
Full RAK4631, Heltec V4 R8 TFT and RC32 packages; representative room, sensor,
LR1110, LR2021, SX1276, STM32WL and ESP-NOW builds. Linked RAK crypto and OTA
workspace checks pass; its complete OTA image uses 712644/712704 bytes.
This commit is contained in:
mikecarper committed 2026-10-25 15:20:55 -07:00
1 parent fb73e3afac
commit 73c5f572eb
89 files changed
+2978 -816

No files matched your search

+60 -25
View File
@@ -4387,6 +4387,9 @@ void MyMesh::onSendComplete(mesh::Packet* packet) {
if (_cli.fleetChannel()) _cli.fleetChannel()->complete(packet, _cli.radioProfiles());
#endif
if (temp_radio_reply_barrier.complete(packet) && !temp_radio_reply_barrier.waiting()) finishRadioReply(true);
_cli.servicePendingRxSettings();
_cli.radioProfiles().servicePendingTuning();
processScheduledRadioSettings(true);
if (packet == pending_battery_alert_packet) {
pending_battery_alert_packet = NULL;
battery_alert_sent = true;
@@ -5129,9 +5132,9 @@ void MyMesh::serviceFleetScheduleReply() {
}
#endif
void MyMesh::processScheduledRadioSettings() {
void MyMesh::processScheduledRadioSettings(bool tx_gap) {
#if MESH_ENABLE_FLEET_CONTROL
serviceFleetScheduleReply();
if (!tx_gap) serviceFleetScheduleReply();
#endif
const uint64_t current_uptime_millis =
uptime_millis + (uint32_t)(millis() - last_millis);
@@ -5175,7 +5178,8 @@ void MyMesh::processScheduledRadioSettings() {
// changes retain their existing bounded retry behavior.
if (scheduled_radio_retry_at
&& !millisHasNowPassed(scheduled_radio_retry_at)
&& !hard_temp_end_due) return;
&& !hard_temp_end_due
&& !(tx_gap && scheduled_radio_retry_failures == 0)) return;
const bool schedule_check_due = next_scheduled_radio_time != 0
&& (next_scheduled_radio_check_at == 0
@@ -5193,7 +5197,7 @@ void MyMesh::processScheduledRadioSettings() {
// Never touch modulation registers while a packet is still on air. Back off
// this check too; a long packet should not make the scheduler poll every loop.
if (hasOutbound()) {
if (!tx_gap && hasOutbound()) {
scheduled_radio_retry_at = futureMillis(RADIO_APPLY_RETRY_INTERVAL_MILLIS);
return;
}
@@ -5908,6 +5912,14 @@ bool MyMesh::setRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) {
return ok;
}
bool MyMesh::supportsRxPowerSaving() const {
return radio_driver.supportsRxPowerSaving();
}
mesh::RadioParamApplyResult MyMesh::trySetRxPowerSaving(bool enable, uint32_t rx_us, uint32_t sleep_us) {
return radio_driver.trySetRxPowerSaving(enable, rx_us, sleep_us);
}
bool MyMesh::supportsRxPowerSavingRfRxDisable() const {
return radio_driver.supportsRxPowerSavingRfRxDisable();
}
@@ -5924,6 +5936,10 @@ bool MyMesh::isRxPowerSavingRfRxDisabled() const {
return radio_driver.isRxPowerSavingRfRxDisabled();
}
mesh::RadioParamApplyResult MyMesh::trySetRxPowerSavingRfRxDisabled(bool disabled) {
return radio_driver.trySetRxPowerSavingRfRxDisabled(disabled);
}
void MyMesh::getRxPsWatchdogCounts(uint32_t* soft, uint32_t* hard) {
*soft = radio_driver.getRxPsWatchdogSoftCount();
*hard = radio_driver.getRxPsWatchdogHardCount();
@@ -5933,10 +5949,22 @@ bool MyMesh::setRxBoostedGain(bool enable) {
return radio_driver.setRxBoostedGainMode(enable);
}
bool MyMesh::supportsRxBoostedGain() const {
return radio_driver.supportsRxBoostedGainMode();
}
mesh::RadioParamApplyResult MyMesh::trySetRxBoostedGain(bool enable) {
return radio_driver.trySetRxBoostedGainMode(enable);
}
#if defined(USE_LR2021)
bool MyMesh::configSideDetectors(const uint8_t sideDetSFs[], uint8_t num, float bw) {
return radio_driver.configSideDetectors(sideDetSFs, num, bw);
}
mesh::RadioParamApplyResult MyMesh::tryConfigSideDetectors(const uint8_t sideDetSFs[], uint8_t num, float bw) {
return radio_driver.tryConfigSideDetectors(sideDetSFs, num, bw);
}
#endif
void MyMesh::formatNeighborsReply(char *reply) {
@@ -11652,12 +11680,11 @@ bool MyMesh::startWebConfigImpl(bool force_ap, char* reply, bool automatic_setup
strcpy(reply, "Err: OTA server is running - 'stop ota' first");
return true;
}
if (_webconfig && (_webconfig->isRunning() || _webconfig->isStopping())) {
if (_webconfig && _webconfig->isRunning()) {
if (!automatic_setup && !_webconfig->isStopping()) {
_webconfig->requestNetworkAccess();
}
strcpy(reply, _webconfig->isStopping() ? "Err: webconfig still stopping, retry shortly"
: "Err: webconfig already running");
strcpy(reply, "Err: webconfig already running");
return true;
}
if (mesh::wireless::control().blocked(mesh::wireless::WiFi)) {
@@ -11710,9 +11737,9 @@ bool MyMesh::startWebConfigImpl(bool force_ap, char* reply, bool automatic_setup
#endif
bool started;
if (force_ap) {
started = _webconfig->startSetupMode(reply);
started = _webconfig->requestStart(true, reply);
} else {
started = _webconfig->startAutoMode(reply);
started = _webconfig->requestStart(false, reply);
}
if (!started) {
// A failed portal must not consume a live operator-started transport.
@@ -11734,7 +11761,8 @@ bool MyMesh::startWebConfigImpl(bool force_ap, char* reply, bool automatic_setup
}
bool MyMesh::stopWebConfig(char* reply) {
if (!_webconfig || !_webconfig->isRunning()) {
if (!_webconfig || (!_webconfig->isRunning() && !_webconfig->isStopping()
&& !_webconfig->isStartPending())) {
strcpy(reply, "Err: webconfig not running");
return true;
}
@@ -11749,7 +11777,7 @@ bool MyMesh::setWebUIEnabled(bool enabled, char* reply) {
return true;
}
if (enabled) {
if (_webconfig && (_webconfig->isRunning() || _webconfig->isStopping())) {
if (_webconfig && _webconfig->isRunning()) {
strcpy(reply, "OK - webui on (already active)");
} else {
startWebConfig(false, reply);
@@ -11760,7 +11788,7 @@ bool MyMesh::setWebUIEnabled(bool enabled, char* reply) {
}
}
} else {
if (_webconfig && _webconfig->isRunning()) _webconfig->requestStop();
if (_webconfig) _webconfig->requestStop();
strcpy(reply, "OK - webui off");
}
return true;
@@ -11801,24 +11829,30 @@ bool MyMesh::getWiFiCLI(char* reply) const {
bool MyMesh::setWiFiSSID(const char* value, char* reply) {
if (WebConfigServer::setStandaloneWiFiSSID(value, reply, 160, canonicalWiFiLegacyPrefs())) {
const bool was_running = _webconfig && _webconfig->isRunning();
if (was_running) _webconfig->requestStop();
if (_webconfig) _webconfig->reloadStandaloneWiFi();
if (was_running) {
strcpy(reply, "OK - WiFi SSID saved; WebConfig stopping, start again to apply");
if (_webconfig) {
_webconfig->reloadStandaloneWiFi();
_webconfig->requestRestart();
}
#ifdef WITH_MQTT_BRIDGE
if (_prefs.bridge_enabled && mqtt_bridge
&& !_cli.getBoard()->isOTAUpdateRunning()) mqtt_bridge->requestRestart();
#endif
strcpy(reply, "OK - WiFi SSID saved; reconnect scheduled");
}
return true;
}
bool MyMesh::setWiFiPassword(const char* value, char* reply) {
if (WebConfigServer::setStandaloneWiFiPassword(value, reply, 160, canonicalWiFiLegacyPrefs())) {
const bool was_running = _webconfig && _webconfig->isRunning();
if (was_running) _webconfig->requestStop();
if (_webconfig) _webconfig->reloadStandaloneWiFi();
if (was_running) {
strcpy(reply, "OK - WiFi password saved; WebConfig stopping, start again to apply");
if (_webconfig) {
_webconfig->reloadStandaloneWiFi();
_webconfig->requestRestart();
}
#ifdef WITH_MQTT_BRIDGE
if (_prefs.bridge_enabled && mqtt_bridge
&& !_cli.getBoard()->isOTAUpdateRunning()) mqtt_bridge->requestRestart();
#endif
strcpy(reply, "OK - WiFi password saved; reconnect scheduled");
}
return true;
}
@@ -13858,7 +13892,7 @@ void __attribute__((noinline)) MyMesh::servicePostMeshLoop() {
#endif
#if defined(WITH_MQTT_BRIDGE)
// MQTT owns TLS on Core 0; the radio loop only reaps an acknowledged stop.
if (mqtt_bridge && mqtt_bridge->isRunning()) mqtt_bridge->loop();
if (mqtt_bridge) mqtt_bridge->loop();
#endif
#if defined(WITH_ESPNOW_BRIDGE)
// ESP-NOW remains cooperative, including in the
@@ -13960,7 +13994,8 @@ void __attribute__((noinline)) MyMesh::servicePostMeshLoop() {
if (_webconfig) {
_webconfig->updateWiFiOwnership(webConfigOwnsWiFi());
_webconfig->tick(millis());
if (!_webconfig->isRunning() && !_webconfig->isStopping()) {
if (!_webconfig->isRunning() && !_webconfig->isStopping()
&& !_webconfig->isStartPending()) {
delete _webconfig;
_webconfig = nullptr;
}
@@ -14813,7 +14848,7 @@ mesh::powerdiag::Mask MyMesh::pendingWorkReason() const {
if (_local_cli_output.busy()) return mask(Reason::SerialIO);
#endif
if (deferred_cli_command.pending || pending_self_advert || _cli.hasActiveUserGpioTimer()
|| _cli.hasPendingTxPower()) return mask(Reason::Scheduled);
|| _cli.hasPendingRadioSettings()) return mask(Reason::Scheduled);
#if defined(WITH_BRIDGE)
const AbstractBridge* active_bridge = activeBridge();
if (active_bridge && active_bridge->isRunning()) {