diff --git a/MQTT_IMPLEMENTATION.md b/MQTT_IMPLEMENTATION.md index be88fe0d3..78bf69fd5 100644 --- a/MQTT_IMPLEMENTATION.md +++ b/MQTT_IMPLEMENTATION.md @@ -150,6 +150,10 @@ The MQTT bridge comes with the following defaults: - `get mqtt.password` - Get MQTT password - `get mqtt.analyzer.us` - Get US Let's Mesh Analyzer server setting (on/off) - `get mqtt.analyzer.eu` - Get EU Let's Mesh Analyzer server setting (on/off) +- `get mqtt.owner` - Get owner public key (64 hex characters) + - **Note**: Available via serial console only (not via LoRa repeater console) +- `get mqtt.email` - Get owner email address + - **Note**: Available via serial console only (not via LoRa repeater console) #### Set Commands - `set mqtt.origin ` - Set device origin name @@ -165,6 +169,8 @@ The MQTT bridge comes with the following defaults: - `set mqtt.password ` - Set MQTT password - `set mqtt.analyzer.us on|off` - Enable/disable US Let's Mesh Analyzer server - `set mqtt.analyzer.eu on|off` - Enable/disable EU Let's Mesh Analyzer server +- `set mqtt.owner <64-hex-char-public-key>` - Set owner public key (64 hex characters, 32 bytes) +- `set mqtt.email ` - Set owner email address for matching nodes with owners ### WiFi Commands @@ -377,6 +383,20 @@ get mqtt.origin get mqtt.iata ``` +**Via Serial Console (Optional - Owner Configuration):** +``` +# Set owner public key (64 hex characters, 32 bytes) +# This is used for matching nodes with owners in MQTT messages +set mqtt.owner A1B2C3D4E5F6789012345678901234567890123456789012345678901234567890 + +# Set owner email address +set mqtt.email owner@example.com + +# Verify owner settings +get mqtt.owner +get mqtt.email +``` + ### Step 5: Configure Timezone Set your local timezone for accurate timestamps.