Merge remote-tracking branch 'origin/dev' into mqtt-bridge-implementation
This commit is contained in:
commit
2b63765522
66 files changed
+860
-119
No files matched your search
+56
-8
@@ -8,7 +8,9 @@
|
||||
|
||||
namespace mesh {
|
||||
|
||||
#define MAX_RX_DELAY_MILLIS 32000 // 32 seconds
|
||||
#define MAX_RX_DELAY_MILLIS 32000 // 32 seconds
|
||||
#define MIN_TX_BUDGET_RESERVE_MS 100 // min budget (ms) required before allowing next TX
|
||||
#define MIN_TX_BUDGET_AIRTIME_DIV 2 // require at least 1/N of estimated airtime as budget before TX
|
||||
|
||||
#ifndef NOISE_FLOOR_CALIB_INTERVAL
|
||||
#define NOISE_FLOOR_CALIB_INTERVAL 2000 // 2 seconds
|
||||
@@ -20,12 +22,34 @@ void Dispatcher::begin() {
|
||||
_err_flags = 0;
|
||||
radio_nonrx_start = _ms->getMillis();
|
||||
|
||||
duty_cycle_window_ms = getDutyCycleWindowMs();
|
||||
float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
|
||||
tx_budget_ms = (unsigned long)(duty_cycle_window_ms * duty_cycle);
|
||||
last_budget_update = _ms->getMillis();
|
||||
|
||||
_radio->begin();
|
||||
prev_isrecv_mode = _radio->isInRecvMode();
|
||||
}
|
||||
|
||||
float Dispatcher::getAirtimeBudgetFactor() const {
|
||||
return 2.0; // default, 33.3% (1/3rd)
|
||||
return 1.0;
|
||||
}
|
||||
|
||||
void Dispatcher::updateTxBudget() {
|
||||
unsigned long now = _ms->getMillis();
|
||||
unsigned long elapsed = now - last_budget_update;
|
||||
|
||||
float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
|
||||
unsigned long max_budget = (unsigned long)(getDutyCycleWindowMs() * duty_cycle);
|
||||
unsigned long refill = (unsigned long)(elapsed * duty_cycle);
|
||||
|
||||
if (refill > 0) {
|
||||
tx_budget_ms += refill;
|
||||
if (tx_budget_ms > max_budget) {
|
||||
tx_budget_ms = max_budget;
|
||||
}
|
||||
last_budget_update = now;
|
||||
}
|
||||
}
|
||||
|
||||
int Dispatcher::calcRxDelay(float score, uint32_t air_time) const {
|
||||
@@ -61,11 +85,24 @@ void Dispatcher::loop() {
|
||||
if (outbound) { // waiting for outbound send to be completed
|
||||
if (_radio->isSendComplete()) {
|
||||
long t = _ms->getMillis() - outbound_start;
|
||||
total_air_time += t; // keep track of how much air time we are using
|
||||
total_air_time += t;
|
||||
//Serial.print(" airtime="); Serial.println(t);
|
||||
|
||||
// will need radio silence up to next_tx_time
|
||||
next_tx_time = futureMillis(t * getAirtimeBudgetFactor());
|
||||
updateTxBudget();
|
||||
|
||||
if (t > tx_budget_ms) {
|
||||
tx_budget_ms = 0;
|
||||
} else {
|
||||
tx_budget_ms -= t;
|
||||
}
|
||||
|
||||
if (tx_budget_ms < MIN_TX_BUDGET_RESERVE_MS) {
|
||||
float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
|
||||
unsigned long needed = MIN_TX_BUDGET_RESERVE_MS - tx_budget_ms;
|
||||
next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
|
||||
} else {
|
||||
next_tx_time = _ms->getMillis();
|
||||
}
|
||||
|
||||
_radio->onSendFinished();
|
||||
logTx(outbound, 2 + outbound->getPathByteLen() + outbound->payload_len);
|
||||
@@ -235,9 +272,20 @@ void Dispatcher::processRecvPacket(Packet* pkt) {
|
||||
}
|
||||
|
||||
void Dispatcher::checkSend() {
|
||||
if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return; // nothing waiting to send
|
||||
if (!millisHasNowPassed(next_tx_time)) return; // still in 'radio silence' phase (from airtime budget setting)
|
||||
if (_radio->isReceiving()) { // LBT - check if radio is currently mid-receive, or if channel activity
|
||||
if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return;
|
||||
|
||||
updateTxBudget();
|
||||
|
||||
uint32_t est_airtime = _radio->getEstAirtimeFor(MAX_TRANS_UNIT);
|
||||
if (tx_budget_ms < est_airtime / MIN_TX_BUDGET_AIRTIME_DIV) {
|
||||
float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
|
||||
unsigned long needed = est_airtime / MIN_TX_BUDGET_AIRTIME_DIV - tx_budget_ms;
|
||||
next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
|
||||
return;
|
||||
}
|
||||
|
||||
if (!millisHasNowPassed(next_tx_time)) return;
|
||||
if (_radio->isReceiving()) {
|
||||
if (cad_busy_start == 0) {
|
||||
cad_busy_start = _ms->getMillis(); // record when CAD busy state started
|
||||
}
|
||||
|
||||
+12
-2
@@ -95,6 +95,7 @@ public:
|
||||
virtual void queueOutbound(Packet* packet, uint8_t priority, uint32_t scheduled_for) = 0;
|
||||
virtual Packet* getNextOutbound(uint32_t now) = 0; // by priority
|
||||
virtual int getOutboundCount(uint32_t now) const = 0;
|
||||
virtual int getOutboundTotal() const = 0;
|
||||
virtual int getFreeCount() const = 0;
|
||||
virtual Packet* getOutboundByIdx(int i) = 0;
|
||||
virtual Packet* removeOutboundByIdx(int i) = 0;
|
||||
@@ -127,8 +128,12 @@ class Dispatcher {
|
||||
bool prev_isrecv_mode;
|
||||
uint32_t n_sent_flood, n_sent_direct;
|
||||
uint32_t n_recv_flood, n_recv_direct;
|
||||
unsigned long tx_budget_ms;
|
||||
unsigned long last_budget_update;
|
||||
unsigned long duty_cycle_window_ms;
|
||||
|
||||
void processRecvPacket(Packet* pkt);
|
||||
void updateTxBudget();
|
||||
|
||||
protected:
|
||||
PacketManager* _mgr;
|
||||
@@ -141,12 +146,15 @@ protected:
|
||||
{
|
||||
outbound = NULL;
|
||||
total_air_time = rx_air_time = 0;
|
||||
next_tx_time = 0;
|
||||
next_tx_time = ms.getMillis();
|
||||
cad_busy_start = 0;
|
||||
next_floor_calib_time = next_agc_reset_time = 0;
|
||||
_err_flags = 0;
|
||||
radio_nonrx_start = 0;
|
||||
prev_isrecv_mode = true;
|
||||
tx_budget_ms = 0;
|
||||
last_budget_update = 0;
|
||||
duty_cycle_window_ms = 3600000;
|
||||
}
|
||||
|
||||
virtual DispatcherAction onRecvPacket(Packet* pkt) = 0;
|
||||
@@ -164,6 +172,7 @@ protected:
|
||||
virtual uint32_t getCADFailMaxDuration() const;
|
||||
virtual int getInterferenceThreshold() const { return 0; } // disabled by default
|
||||
virtual int getAGCResetInterval() const { return 0; } // disabled by default
|
||||
virtual unsigned long getDutyCycleWindowMs() const { return 3600000; }
|
||||
|
||||
public:
|
||||
void begin();
|
||||
@@ -173,8 +182,9 @@ public:
|
||||
void releasePacket(Packet* packet);
|
||||
void sendPacket(Packet* packet, uint8_t priority, uint32_t delay_millis=0);
|
||||
|
||||
unsigned long getTotalAirTime() const { return total_air_time; } // in milliseconds
|
||||
unsigned long getTotalAirTime() const { return total_air_time; }
|
||||
unsigned long getReceiveAirTime() const {return rx_air_time; }
|
||||
unsigned long getRemainingTxBudget() const { return tx_budget_ms; }
|
||||
uint32_t getNumSentFlood() const { return n_sent_flood; }
|
||||
uint32_t getNumSentDirect() const { return n_sent_direct; }
|
||||
uint32_t getNumRecvFlood() const { return n_recv_flood; }
|
||||
|
||||
@@ -26,6 +26,10 @@ static size_t getMQTTFieldsSize(const NodePrefs* prefs) {
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifndef BRIDGE_MAX_BAUD
|
||||
#define BRIDGE_MAX_BAUD 115200
|
||||
#endif
|
||||
|
||||
// Believe it or not, this std C function is busted on some platforms!
|
||||
static uint32_t _atoi(const char* sp) {
|
||||
uint32_t n = 0;
|
||||
@@ -176,7 +180,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
|
||||
_prefs->bridge_enabled = constrain(_prefs->bridge_enabled, 0, 1);
|
||||
_prefs->bridge_delay = constrain(_prefs->bridge_delay, 0, 10000);
|
||||
_prefs->bridge_pkt_src = constrain(_prefs->bridge_pkt_src, 0, 1);
|
||||
_prefs->bridge_baud = constrain(_prefs->bridge_baud, 9600, 115200);
|
||||
_prefs->bridge_baud = constrain(_prefs->bridge_baud, 9600, BRIDGE_MAX_BAUD);
|
||||
_prefs->bridge_channel = constrain(_prefs->bridge_channel, 0, 14);
|
||||
|
||||
_prefs->powersaving_enabled = constrain(_prefs->powersaving_enabled, 0, 1);
|
||||
@@ -1009,13 +1013,13 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
|
||||
#ifdef WITH_RS232_BRIDGE
|
||||
} else if (memcmp(config, "bridge.baud ", 12) == 0) {
|
||||
uint32_t baud = atoi(&config[12]);
|
||||
if (baud >= 9600 && baud <= 115200) {
|
||||
if (baud >= 9600 && baud <= BRIDGE_MAX_BAUD) {
|
||||
_prefs->bridge_baud = (uint32_t)baud;
|
||||
_callbacks->restartBridge();
|
||||
savePrefs();
|
||||
strcpy(reply, "OK");
|
||||
} else {
|
||||
strcpy(reply, "Error: baud rate must be between 9600-115200");
|
||||
sprintf(reply, "Error: baud rate must be between 9600-%d",BRIDGE_MAX_BAUD);
|
||||
}
|
||||
#endif
|
||||
#ifdef WITH_ESPNOW_BRIDGE
|
||||
|
||||
@@ -9,6 +9,8 @@ PacketQueue::PacketQueue(int max_entries) {
|
||||
}
|
||||
|
||||
int PacketQueue::countBefore(uint32_t now) const {
|
||||
if (now == 0xFFFFFFFF) return _num; // sentinel: count all entries regardless of schedule
|
||||
|
||||
int n = 0;
|
||||
for (int j = 0; j < _num; j++) {
|
||||
if ((int32_t)(_schedule_table[j] - now) > 0) continue; // scheduled for future... ignore for now
|
||||
@@ -97,6 +99,10 @@ int StaticPoolPacketManager::getOutboundCount(uint32_t now) const {
|
||||
return send_queue.countBefore(now);
|
||||
}
|
||||
|
||||
int StaticPoolPacketManager::getOutboundTotal() const {
|
||||
return send_queue.count();
|
||||
}
|
||||
|
||||
int StaticPoolPacketManager::getFreeCount() const {
|
||||
return unused.count();
|
||||
}
|
||||
|
||||
@@ -29,6 +29,7 @@ public:
|
||||
void queueOutbound(mesh::Packet* packet, uint8_t priority, uint32_t scheduled_for) override;
|
||||
mesh::Packet* getNextOutbound(uint32_t now) override;
|
||||
int getOutboundCount(uint32_t now) const override;
|
||||
int getOutboundTotal() const override;
|
||||
int getFreeCount() const override;
|
||||
mesh::Packet* getOutboundByIdx(int i) override;
|
||||
mesh::Packet* removeOutboundByIdx(int i) override;
|
||||
|
||||
@@ -14,7 +14,7 @@ public:
|
||||
board.getBattMilliVolts(),
|
||||
ms.getMillis() / 1000,
|
||||
err_flags,
|
||||
mgr->getOutboundCount(0xFFFFFFFF)
|
||||
mgr->getOutboundTotal()
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
@@ -39,10 +39,13 @@ class MicroNMEALocationProvider : public LocationProvider {
|
||||
mesh::RTCClock* _clock;
|
||||
Stream* _gps_serial;
|
||||
RefCountedDigitalPin* _peripher_power;
|
||||
int8_t _claims = 0;
|
||||
int _pin_reset;
|
||||
int _pin_en;
|
||||
long next_check = 0;
|
||||
long time_valid = 0;
|
||||
unsigned long _last_time_sync = 0;
|
||||
static const unsigned long TIME_SYNC_INTERVAL = 1800000; // Re-sync every 30 minutes
|
||||
|
||||
public :
|
||||
MicroNMEALocationProvider(Stream& ser, mesh::RTCClock* clock = NULL, int pin_reset = GPS_RESET, int pin_en = GPS_EN,RefCountedDigitalPin* peripher_power=NULL) :
|
||||
@@ -57,8 +60,21 @@ public :
|
||||
}
|
||||
}
|
||||
|
||||
void claim() {
|
||||
_claims++;
|
||||
if (_claims > 0) {
|
||||
if (_peripher_power) _peripher_power->claim();
|
||||
}
|
||||
}
|
||||
|
||||
void release() {
|
||||
if (_claims == 0) return; // avoid negative _claims
|
||||
_claims--;
|
||||
if (_peripher_power) _peripher_power->release();
|
||||
}
|
||||
|
||||
void begin() override {
|
||||
if (_peripher_power) _peripher_power->claim();
|
||||
claim();
|
||||
if (_pin_en != -1) {
|
||||
digitalWrite(_pin_en, PIN_GPS_EN_ACTIVE);
|
||||
}
|
||||
@@ -82,7 +98,7 @@ public :
|
||||
if (_pin_reset != -1) {
|
||||
digitalWrite(_pin_reset, GPS_RESET_FORCE);
|
||||
}
|
||||
if (_peripher_power) _peripher_power->release();
|
||||
release();
|
||||
}
|
||||
|
||||
bool isEnabled() override {
|
||||
@@ -129,10 +145,15 @@ public :
|
||||
|
||||
if (millis() > next_check) {
|
||||
next_check = millis() + 1000;
|
||||
// Re-enable time sync periodically when GPS has valid fix
|
||||
if (!_time_sync_needed && _clock != NULL && (millis() - _last_time_sync) > TIME_SYNC_INTERVAL) {
|
||||
_time_sync_needed = true;
|
||||
}
|
||||
if (_time_sync_needed && time_valid > 2) {
|
||||
if (_clock != NULL) {
|
||||
_clock->setCurrentTime(getTimestamp());
|
||||
_time_sync_needed = false;
|
||||
_last_time_sync = millis();
|
||||
}
|
||||
}
|
||||
if (isValid()) {
|
||||
|
||||
Reference in new issue
Block a user