Remove PowerSaving changes from Halo retry branch
This commit is contained in:
1 parent
17dc51dbce
commit
2acd61ec84
33 files changed
+93
-536
No files matched your search
@@ -53,6 +53,10 @@ public:
|
||||
virtual void onAfterTransmit() { }
|
||||
virtual void reboot() = 0;
|
||||
virtual void powerOff() { /* no op */ }
|
||||
// Called by example setup() functions to signal that boot is complete.
|
||||
// Boards may override to stop a boot-indicator LED sequence or similar.
|
||||
// Default no-op: boards that don't care need not implement anything.
|
||||
virtual void onBootComplete() { /* no op */ }
|
||||
virtual uint32_t getIRQGpio() { return -1; } // not supported. Returns DIO1 (SX1262) and DIO0 (SX127x)
|
||||
virtual void sleep(uint32_t secs) { /* no op */ }
|
||||
virtual uint32_t getGpio() { return 0; }
|
||||
|
||||
@@ -1,6 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern "C" {
|
||||
__attribute__((section(".persistent_magic"))) uint32_t persistent_magic;
|
||||
__attribute__((section(".persistent_data"))) uint32_t persistent_time;
|
||||
}
|
||||
@@ -3,57 +3,19 @@
|
||||
#include <Mesh.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
#ifdef NRF52_PLATFORM
|
||||
#define CLOCK_MAGIC_NUM 0xAA55CC33
|
||||
#define RTC_TIME_MIN 1772323200 // 1 Mar 2026
|
||||
|
||||
extern uint32_t persistent_magic;
|
||||
extern uint32_t persistent_time;
|
||||
#endif
|
||||
|
||||
class VolatileRTCClock : public mesh::RTCClock {
|
||||
uint32_t base_time;
|
||||
uint64_t accumulator;
|
||||
unsigned long prev_millis;
|
||||
|
||||
public:
|
||||
VolatileRTCClock() {
|
||||
#ifdef NRF52_PLATFORM
|
||||
if (persistent_magic == CLOCK_MAGIC_NUM && persistent_time >= RTC_TIME_MIN) {
|
||||
base_time = persistent_time;
|
||||
} else {
|
||||
base_time = RTC_TIME_MIN;
|
||||
}
|
||||
#else
|
||||
base_time = 1715770351;
|
||||
#endif
|
||||
|
||||
accumulator = 0;
|
||||
prev_millis = millis();
|
||||
}
|
||||
|
||||
VolatileRTCClock() { base_time = 1715770351; accumulator = 0; prev_millis = millis(); } // 15 May 2024, 8:50pm
|
||||
uint32_t getCurrentTime() override { return base_time + accumulator/1000; }
|
||||
|
||||
void setCurrentTime(uint32_t time) override {
|
||||
base_time = time;
|
||||
accumulator = 0;
|
||||
prev_millis = millis();
|
||||
|
||||
#ifdef NRF52_PLATFORM
|
||||
persistent_magic = CLOCK_MAGIC_NUM;
|
||||
persistent_time = time;
|
||||
#endif
|
||||
}
|
||||
void setCurrentTime(uint32_t time) override { base_time = time; accumulator = 0; prev_millis = millis(); }
|
||||
|
||||
void tick() override {
|
||||
unsigned long now = millis();
|
||||
accumulator += (now - prev_millis);
|
||||
prev_millis = now;
|
||||
|
||||
#ifdef NRF52_PLATFORM
|
||||
persistent_magic = CLOCK_MAGIC_NUM;
|
||||
persistent_time = getCurrentTime();
|
||||
#endif
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
@@ -17,10 +17,6 @@ bool ArduinoSerialInterface::isConnected() const {
|
||||
return true; // no way of knowing, so assume yes
|
||||
}
|
||||
|
||||
bool ArduinoSerialInterface::isReadBusy() const {
|
||||
return false;
|
||||
}
|
||||
|
||||
bool ArduinoSerialInterface::isWriteBusy() const {
|
||||
return false;
|
||||
}
|
||||
|
||||
@@ -28,8 +28,7 @@ public:
|
||||
|
||||
bool isConnected() const override;
|
||||
|
||||
bool isReadBusy() const override;
|
||||
bool isWriteBusy() const override;
|
||||
size_t writeFrame(const uint8_t src[], size_t len) override;
|
||||
size_t checkRecvFrame(uint8_t dest[]) override;
|
||||
};
|
||||
};
|
||||
@@ -38,6 +38,8 @@ public:
|
||||
#define MAX_CONTACTS 32
|
||||
#endif
|
||||
|
||||
#define MAX_ANON_CONTACTS 8
|
||||
|
||||
#ifndef MAX_CONNECTIONS
|
||||
#define MAX_CONNECTIONS 16
|
||||
#endif
|
||||
@@ -59,9 +61,9 @@ class BaseChatMesh : public mesh::Mesh {
|
||||
|
||||
friend class ContactsIterator;
|
||||
|
||||
ContactInfo contacts[MAX_CONTACTS];
|
||||
ContactInfo contacts[MAX_CONTACTS+MAX_ANON_CONTACTS];
|
||||
int num_contacts;
|
||||
int sort_array[MAX_CONTACTS];
|
||||
int sort_array[MAX_CONTACTS+MAX_ANON_CONTACTS];
|
||||
int matching_peer_indexes[MAX_SEARCH_RESULTS];
|
||||
unsigned long txt_send_timeout;
|
||||
#ifdef MAX_GROUP_CHANNELS
|
||||
@@ -73,7 +75,7 @@ class BaseChatMesh : public mesh::Mesh {
|
||||
ConnectionInfo connections[MAX_CONNECTIONS];
|
||||
|
||||
mesh::Packet* composeMsgPacket(const ContactInfo& recipient, uint32_t timestamp, uint8_t attempt, const char *text, uint32_t& expected_ack);
|
||||
void sendAckTo(const ContactInfo& dest, uint32_t ack_hash);
|
||||
void sendAckTo(const ContactInfo& dest, const uint8_t* ack_hash, uint8_t ack_len=4);
|
||||
|
||||
protected:
|
||||
BaseChatMesh(mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::PacketManager& mgr, mesh::MeshTables& tables)
|
||||
@@ -97,7 +99,7 @@ protected:
|
||||
num_contacts = MAX_ANON_CONTACTS; // seed the first contacts for anon requests
|
||||
}
|
||||
void populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp);
|
||||
ContactInfo* allocateContactSlot(); // helper to find slot for new contact
|
||||
ContactInfo* allocateContactSlot(bool transient_only=false); // helper to find slot for new contact
|
||||
|
||||
// 'UI' concepts, for sub-classes to implement
|
||||
virtual bool isAutoAddEnabled() const { return true; }
|
||||
|
||||
@@ -15,7 +15,6 @@ public:
|
||||
|
||||
virtual bool isConnected() const = 0;
|
||||
|
||||
virtual bool isReadBusy() const = 0;
|
||||
virtual bool isWriteBusy() const = 0;
|
||||
virtual size_t writeFrame(const uint8_t src[], size_t len) = 0;
|
||||
virtual size_t checkRecvFrame(uint8_t dest[]) = 0;
|
||||
|
||||
@@ -14,7 +14,6 @@
|
||||
#include <Wire.h>
|
||||
#include "soc/rtc.h"
|
||||
#include "esp_system.h"
|
||||
#include <driver/rtc_io.h>
|
||||
|
||||
class ESP32Board : public mesh::MainBoard {
|
||||
protected:
|
||||
@@ -25,7 +24,7 @@ protected:
|
||||
public:
|
||||
void begin() {
|
||||
// for future use, sub-classes SHOULD call this from their begin()
|
||||
startup_reason = BD_STARTUP_NORMAL;
|
||||
startup_reason = BD_STARTUP_NORMAL;
|
||||
|
||||
#ifdef ESP32_CPU_FREQ
|
||||
setCpuFrequencyMhz(ESP32_CPU_FREQ);
|
||||
@@ -48,7 +47,7 @@ public:
|
||||
#endif
|
||||
#else
|
||||
Wire.begin();
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
// Temperature from ESP32 MCU
|
||||
@@ -63,31 +62,6 @@ public:
|
||||
return raw / 4;
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
enterDeepSleep(0); // Do not wakeup
|
||||
}
|
||||
|
||||
void enterDeepSleep(uint32_t secs) {
|
||||
// Clear stale wakeup sources to avoid ghost wakeup
|
||||
// This is required when Power Management and automatic lightsleep are enabled
|
||||
esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
|
||||
|
||||
if (secs > 0) {
|
||||
esp_sleep_enable_timer_wakeup(secs * 1000000ULL);
|
||||
}
|
||||
|
||||
// Keep LoRa inactive during deepsleep
|
||||
digitalWrite(P_LORA_NSS, HIGH);
|
||||
#if CONFIG_IDF_TARGET_ESP32C3
|
||||
gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
#else
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
#endif
|
||||
|
||||
// Finally set ESP32 into deepsleep
|
||||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
||||
}
|
||||
|
||||
uint32_t getIRQGpio() override {
|
||||
return P_LORA_DIO_1; // default for SX1262
|
||||
}
|
||||
@@ -99,15 +73,8 @@ public:
|
||||
return;
|
||||
}
|
||||
|
||||
#if defined(ARDUINO_USB_CDC_ON_BOOT) && ARDUINO_USB_CDC_ON_BOOT
|
||||
if (Serial) {
|
||||
delay(1);
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
// Set GPIO wakeup
|
||||
gpio_num_t wakeupPin = (gpio_num_t)getIRQGpio();
|
||||
gpio_num_t wakeupPin = (gpio_num_t)getIRQGpio();
|
||||
|
||||
// Configure timer wakeup
|
||||
if (secs > 0) {
|
||||
@@ -188,68 +155,21 @@ public:
|
||||
void setInhibitSleep(bool inhibit) {
|
||||
inhibit_sleep = inhibit;
|
||||
}
|
||||
|
||||
uint32_t getResetReason() const override {
|
||||
return esp_reset_reason();
|
||||
}
|
||||
|
||||
// https://docs.espressif.com/projects/esp-idf/en/v4.4.7/esp32/api-reference/system/system.html
|
||||
const char *getResetReasonString(uint32_t reason) {
|
||||
switch (reason) {
|
||||
case ESP_RST_UNKNOWN:
|
||||
return "Unknown or first boot";
|
||||
case ESP_RST_POWERON:
|
||||
return "Power-on reset";
|
||||
case ESP_RST_EXT:
|
||||
return "External reset";
|
||||
case ESP_RST_SW:
|
||||
return "Software reset";
|
||||
case ESP_RST_PANIC:
|
||||
return "Panic / exception reset";
|
||||
case ESP_RST_INT_WDT:
|
||||
return "Interrupt watchdog reset";
|
||||
case ESP_RST_TASK_WDT:
|
||||
return "Task watchdog reset";
|
||||
case ESP_RST_WDT:
|
||||
return "Other watchdog reset";
|
||||
case ESP_RST_DEEPSLEEP:
|
||||
return "Wake from deep sleep";
|
||||
case ESP_RST_BROWNOUT:
|
||||
return "Brownout (low voltage)";
|
||||
case ESP_RST_SDIO:
|
||||
return "SDIO reset";
|
||||
default:
|
||||
static char buf[40];
|
||||
snprintf(buf, sizeof(buf), "Unknown reset reason (%d)", reason);
|
||||
return buf;
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
static RTC_NOINIT_ATTR uint32_t _rtc_backup_time;
|
||||
static RTC_NOINIT_ATTR uint32_t _rtc_backup_magic;
|
||||
#define RTC_BACKUP_MAGIC 0xAA55CC33
|
||||
#define RTC_TIME_MIN 1772323200 // 1 Mar 2026
|
||||
|
||||
class ESP32RTCClock : public mesh::RTCClock {
|
||||
public:
|
||||
ESP32RTCClock() { }
|
||||
void begin() {
|
||||
esp_reset_reason_t reason = esp_reset_reason();
|
||||
if (reason == ESP_RST_DEEPSLEEP) {
|
||||
return; // ESP-IDF preserves system time across deep sleep
|
||||
}
|
||||
// All other resets (power-on, crash, WDT, brownout) lose system time.
|
||||
// Restore from RTC backup if valid, otherwise use hardcoded seed.
|
||||
struct timeval tv;
|
||||
if (_rtc_backup_magic == RTC_BACKUP_MAGIC && _rtc_backup_time > RTC_TIME_MIN) {
|
||||
tv.tv_sec = _rtc_backup_time;
|
||||
} else {
|
||||
tv.tv_sec = 1772323200; // 1 Mar 2026
|
||||
}
|
||||
if (reason == ESP_RST_POWERON) {
|
||||
// start with some date/time in the recent past
|
||||
struct timeval tv;
|
||||
tv.tv_sec = 1715770351; // 15 May 2024, 8:50pm
|
||||
tv.tv_usec = 0;
|
||||
settimeofday(&tv, NULL);
|
||||
}
|
||||
}
|
||||
uint32_t getCurrentTime() override {
|
||||
time_t _now;
|
||||
time(&_now);
|
||||
@@ -260,16 +180,6 @@ public:
|
||||
tv.tv_sec = time;
|
||||
tv.tv_usec = 0;
|
||||
settimeofday(&tv, NULL);
|
||||
_rtc_backup_time = time;
|
||||
_rtc_backup_magic = RTC_BACKUP_MAGIC;
|
||||
}
|
||||
void tick() override {
|
||||
time_t now;
|
||||
time(&now);
|
||||
if (now > RTC_TIME_MIN && (uint32_t)now != _rtc_backup_time) {
|
||||
_rtc_backup_time = (uint32_t)now;
|
||||
_rtc_backup_magic = RTC_BACKUP_MAGIC;
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
@@ -15,6 +15,8 @@
|
||||
|
||||
#include "ESP32Board.h"
|
||||
|
||||
#include <driver/rtc_io.h>
|
||||
|
||||
class MeshadventurerBoard : public ESP32Board {
|
||||
|
||||
public:
|
||||
@@ -33,6 +35,34 @@ public:
|
||||
}
|
||||
}
|
||||
|
||||
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
|
||||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
||||
|
||||
// Make sure the DIO1 and NSS GPIOs are held on required levels during deep sleep
|
||||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
||||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
||||
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
|
||||
if (pin_wake_btn < 0) {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
||||
} else {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
||||
}
|
||||
|
||||
if (secs > 0) {
|
||||
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
||||
}
|
||||
|
||||
// Finally set ESP32 into sleep
|
||||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
// TODO: re-enable this when there is a definite wake-up source pin:
|
||||
// enterDeepSleep(0);
|
||||
}
|
||||
|
||||
uint16_t getBattMilliVolts() override {
|
||||
analogReadResolution(12);
|
||||
|
||||
|
||||
+14
-14
@@ -66,20 +66,6 @@ void NRF52Board::initPowerMgr() {
|
||||
}
|
||||
}
|
||||
|
||||
bool NRF52Board::isExternalPowered() {
|
||||
// Check if SoftDevice is enabled before using its API
|
||||
uint8_t sd_enabled = 0;
|
||||
sd_softdevice_is_enabled(&sd_enabled);
|
||||
|
||||
if (sd_enabled) {
|
||||
uint32_t usb_status;
|
||||
sd_power_usbregstatus_get(&usb_status);
|
||||
return (usb_status & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
|
||||
} else {
|
||||
return (NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
|
||||
}
|
||||
}
|
||||
|
||||
const char* NRF52Board::getResetReasonString(uint32_t reason) {
|
||||
if (reason & POWER_RESETREAS_RESETPIN_Msk) return "Reset Pin";
|
||||
if (reason & POWER_RESETREAS_DOG_Msk) return "Watchdog";
|
||||
@@ -251,6 +237,20 @@ void NRF52BoardDCDC::begin() {
|
||||
}
|
||||
}
|
||||
|
||||
bool NRF52Board::isExternalPowered() {
|
||||
// Check if SoftDevice is enabled before using its API
|
||||
uint8_t sd_enabled = 0;
|
||||
sd_softdevice_is_enabled(&sd_enabled);
|
||||
|
||||
if (sd_enabled) {
|
||||
uint32_t usb_status;
|
||||
sd_power_usbregstatus_get(&usb_status);
|
||||
return (usb_status & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
|
||||
} else {
|
||||
return (NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
|
||||
}
|
||||
}
|
||||
|
||||
void NRF52Board::sleep(uint32_t secs) {
|
||||
// Clear FPU interrupt flags to avoid insomnia
|
||||
// see errata 87 for details https://docs.nordicsemi.com/bundle/errata_nRF52840_Rev3/page/ERR/nRF52840/Rev3/latest/anomaly_840_87.html
|
||||
|
||||
@@ -53,9 +53,9 @@ public:
|
||||
virtual bool getBootloaderVersion(char* version, size_t max_len) override;
|
||||
virtual bool startOTAUpdate(const char *id, char reply[]) override;
|
||||
virtual void sleep(uint32_t secs) override;
|
||||
bool isExternalPowered() override;
|
||||
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
bool isExternalPowered() override;
|
||||
uint16_t getBootVoltage() override { return boot_voltage_mv; }
|
||||
virtual uint32_t getResetReason() const override { return reset_reason; }
|
||||
uint8_t getShutdownReason() const override { return shutdown_reason; }
|
||||
@@ -67,7 +67,7 @@ public:
|
||||
/*
|
||||
* The NRF52 has an internal DC/DC regulator that allows increased efficiency
|
||||
* compared to the LDO regulator. For being able to use it, the module/board
|
||||
* needs to have the required inductors and and capacitors populated. If the
|
||||
* needs to have the required inductors and capacitors populated. If the
|
||||
* hardware requirements are met, this subclass can be used to enable the DC/DC
|
||||
* regulator.
|
||||
*/
|
||||
|
||||
@@ -2,7 +2,6 @@
|
||||
|
||||
#include <CayenneLPP.h>
|
||||
#include "sensors/LocationProvider.h"
|
||||
#include <Wire.h>
|
||||
|
||||
#define TELEM_PERM_BASE 0x01 // 'base' permission includes battery
|
||||
#define TELEM_PERM_LOCATION 0x02
|
||||
@@ -16,7 +15,6 @@ public:
|
||||
double node_altitude; // altitude in meters
|
||||
|
||||
SensorManager() { node_lat = 0; node_lon = 0; node_altitude = 0; }
|
||||
virtual bool i2c_probe(TwoWire& wire, uint8_t addr) { return false; }
|
||||
virtual bool begin() { return false; }
|
||||
virtual bool querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) { return false; }
|
||||
virtual void loop() { }
|
||||
|
||||
@@ -182,10 +182,6 @@ size_t SerialBLEInterface::writeFrame(const uint8_t src[], size_t len) {
|
||||
|
||||
#define BLE_WRITE_MIN_INTERVAL 60
|
||||
|
||||
bool SerialBLEInterface::isReadBusy() const {
|
||||
return (recv_queue_len > 0);
|
||||
}
|
||||
|
||||
bool SerialBLEInterface::isWriteBusy() const {
|
||||
return millis() < _last_write + BLE_WRITE_MIN_INTERVAL; // still too soon to start another write?
|
||||
}
|
||||
|
||||
@@ -76,7 +76,6 @@ public:
|
||||
|
||||
bool isConnected() const override;
|
||||
|
||||
bool isReadBusy() const override;
|
||||
bool isWriteBusy() const override;
|
||||
size_t writeFrame(const uint8_t src[], size_t len) override;
|
||||
size_t checkRecvFrame(uint8_t dest[]) override;
|
||||
|
||||
@@ -39,10 +39,6 @@ size_t SerialWifiInterface::writeFrame(const uint8_t src[], size_t len) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
bool SerialWifiInterface::isReadBusy() const {
|
||||
return false;
|
||||
}
|
||||
|
||||
bool SerialWifiInterface::isWriteBusy() const {
|
||||
return false;
|
||||
}
|
||||
|
||||
@@ -52,7 +52,6 @@ public:
|
||||
bool isEnabled() const override { return _isEnabled; }
|
||||
|
||||
bool isConnected() const override;
|
||||
bool isReadBusy() const override;
|
||||
bool isWriteBusy() const override;
|
||||
|
||||
size_t writeFrame(const uint8_t src[], size_t len) override;
|
||||
|
||||
@@ -86,6 +86,7 @@
|
||||
#include <Arduino.h>
|
||||
#include "XPowersLib.h"
|
||||
#include "helpers/ESP32Board.h"
|
||||
#include <driver/rtc_io.h>
|
||||
|
||||
class TBeamBoard : public ESP32Board {
|
||||
XPowersLibInterface *PMU = NULL;
|
||||
@@ -130,6 +131,29 @@ public:
|
||||
}
|
||||
#endif
|
||||
|
||||
void enterDeepSleep(uint32_t secs, int pin_wake_btn) {
|
||||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
||||
|
||||
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
||||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
||||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
||||
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
|
||||
if (pin_wake_btn < 0) {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
||||
} else {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
||||
}
|
||||
|
||||
if (secs > 0) {
|
||||
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
||||
}
|
||||
|
||||
// Finally set ESP32 into sleep
|
||||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
||||
}
|
||||
|
||||
uint16_t getBattMilliVolts(){
|
||||
return PMU->getBattVoltage();
|
||||
}
|
||||
|
||||
@@ -401,10 +401,6 @@ bool SerialBLEInterface::isConnected() const {
|
||||
return _isDeviceConnected && Bluefruit.connected() > 0;
|
||||
}
|
||||
|
||||
bool SerialBLEInterface::isReadBusy() const {
|
||||
return (recv_queue_len > 0);
|
||||
}
|
||||
|
||||
bool SerialBLEInterface::isWriteBusy() const {
|
||||
return send_queue_len >= (FRAME_QUEUE_SIZE * 2 / 3);
|
||||
}
|
||||
@@ -66,7 +66,6 @@ public:
|
||||
void disable() override;
|
||||
bool isEnabled() const override { return _isEnabled; }
|
||||
bool isConnected() const override;
|
||||
bool isReadBusy() const override;
|
||||
bool isWriteBusy() const override;
|
||||
size_t writeFrame(const uint8_t src[], size_t len) override;
|
||||
size_t checkRecvFrame(uint8_t dest[]) override;
|
||||
|
||||
@@ -15,7 +15,6 @@
|
||||
#if ENV_INCLUDE_BME680_BSEC
|
||||
#ifndef TELEM_BME680_ADDRESS
|
||||
#define TELEM_BME680_ADDRESS 0x76
|
||||
#define TELEM_BME680_ADDRESS_2 0x77
|
||||
#endif
|
||||
#define TELEM_BME680_SEALEVELPRESSURE_HPA (1013.25)
|
||||
#include <bsec.h>
|
||||
@@ -41,7 +40,6 @@ static uint32_t bsec_last_save_ms = 0;
|
||||
#ifdef ENV_INCLUDE_BME680
|
||||
#ifndef TELEM_BME680_ADDRESS
|
||||
#define TELEM_BME680_ADDRESS 0x76
|
||||
#define TELEM_BME680_ADDRESS_2 0x77
|
||||
#endif
|
||||
#define TELEM_BME680_SEALEVELPRESSURE_HPA (1013.25)
|
||||
#include <Adafruit_BME680.h>
|
||||
@@ -65,7 +63,6 @@ static Adafruit_AHTX0 AHTX0;
|
||||
#if ENV_INCLUDE_BME280
|
||||
#ifndef TELEM_BME280_ADDRESS
|
||||
#define TELEM_BME280_ADDRESS 0x76 // BME280 environmental sensor I2C address
|
||||
#define TELEM_BME280_ADDRESS_2 0x77
|
||||
#endif
|
||||
#define TELEM_BME280_SEALEVELPRESSURE_HPA (1013.25) // Atmospheric pressure at sea level
|
||||
#include <Adafruit_BME280.h>
|
||||
@@ -75,7 +72,6 @@ static Adafruit_BME280 BME280;
|
||||
#if ENV_INCLUDE_BMP280
|
||||
#ifndef TELEM_BMP280_ADDRESS
|
||||
#define TELEM_BMP280_ADDRESS 0x76 // BMP280 environmental sensor I2C address
|
||||
#define TELEM_BMP280_ADDRESS_2 0x77
|
||||
#endif
|
||||
#define TELEM_BMP280_SEALEVELPRESSURE_HPA (1013.25) // Atmospheric pressure at sea level
|
||||
#include <Adafruit_BMP280.h>
|
||||
@@ -561,27 +557,15 @@ static const SensorDef SENSOR_TABLE[] = {
|
||||
#endif
|
||||
#ifdef ENV_INCLUDE_BME680
|
||||
{ TELEM_BME680_ADDRESS, "BME680", init_bme680, query_bme680 },
|
||||
#ifdef TELEM_BME680_ADDRESS_2
|
||||
{ TELEM_BME680_ADDRESS_2, "BME680", init_bme680, query_bme680 },
|
||||
#endif
|
||||
#endif
|
||||
#if ENV_INCLUDE_BME680_BSEC
|
||||
{ TELEM_BME680_ADDRESS, "BME680+BSEC", init_bme680_bsec, query_bme680_bsec },
|
||||
#ifdef TELEM_BME680_ADDRESS_2
|
||||
{ TELEM_BME680_ADDRESS_2, "BME680+BSEC", init_bme680_bsec, query_bme680_bsec },
|
||||
#endif
|
||||
#endif
|
||||
#if ENV_INCLUDE_BME280
|
||||
{ TELEM_BME280_ADDRESS, "BME280", init_bme280, query_bme280 },
|
||||
#ifdef TELEM_BME280_ADDRESS_2
|
||||
{ TELEM_BME280_ADDRESS_2, "BME280", init_bme280, query_bme280 },
|
||||
#endif
|
||||
#endif
|
||||
#if ENV_INCLUDE_BMP280
|
||||
{ TELEM_BMP280_ADDRESS, "BMP280", init_bmp280, query_bmp280 },
|
||||
#ifdef TELEM_BMP280_ADDRESS_2
|
||||
{ TELEM_BMP280_ADDRESS_2, "BMP280", init_bmp280, query_bmp280 },
|
||||
#endif
|
||||
#endif
|
||||
#if ENV_INCLUDE_SHTC3
|
||||
{ 0x70, "SHTC3", init_shtc3, query_shtc3 },
|
||||
|
||||
@@ -41,7 +41,6 @@ public:
|
||||
#else
|
||||
EnvironmentSensorManager(){};
|
||||
#endif
|
||||
bool i2c_probe(TwoWire& wire, uint8_t addr) override;
|
||||
bool begin() override;
|
||||
bool querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) override;
|
||||
#if ENV_INCLUDE_GPS || defined(ENV_INCLUDE_BME680_BSEC)
|
||||
|
||||
@@ -63,15 +63,6 @@ void ST7735Display::turnOff() {
|
||||
#else
|
||||
digitalWrite(PIN_TFT_LEDA_CTL, LOW);
|
||||
#endif
|
||||
|
||||
// Prevent back-powering to save 2.8 mA
|
||||
pinMode(PIN_TFT_CS, INPUT);
|
||||
pinMode(PIN_TFT_DC, INPUT);
|
||||
pinMode(PIN_TFT_SDA, INPUT);
|
||||
pinMode(PIN_TFT_SCL, INPUT);
|
||||
pinMode(PIN_TFT_RST, INPUT);
|
||||
pinMode(PIN_TFT_LEDA_CTL, INPUT);
|
||||
|
||||
_isOn = false;
|
||||
|
||||
if (_peripher_power) _peripher_power->release();
|
||||
|
||||
Reference in new issue
Block a user