Merge remote-tracking branch 'upstream/dev' into HEAD

# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
#	src/helpers/BaseChatMesh.cpp
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	variants/heltec_t096/T096Board.cpp
#	variants/heltec_v4/HeltecV4Board.cpp
This commit is contained in:
mikecarper committed 2026-06-15 15:52:11 -07:00
commit 166261c73e
21 files changed
+302 -3347

No files matched your search

+6 -10
View File
@@ -263,6 +263,9 @@ float MyMesh::getAirtimeBudgetFactor() const {
int MyMesh::getInterferenceThreshold() const {
return 0; // disabled for now, until currentRSSI() problem is resolved
}
bool MyMesh::getCADEnabled() const {
return true; // hardware CAD before TX (no CLI toggle on companion; enabled by default)
}
int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
if (_prefs.rx_delay_base <= 0.0f) return 0;
@@ -856,7 +859,7 @@ void MyMesh::onSendTimeout() {}
MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMeshTables &tables, DataStore& store, AbstractUITask* ui)
: BaseChatMesh(radio, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables),
_serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui) {
_serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui), _iter(0) {
_iter_started = false;
_cli_rescue = false;
offline_queue_len = 0;
@@ -1547,6 +1550,7 @@ void MyMesh::handleCmdFrame(size_t len) {
memcpy(anon.id.pub_key, pub_key, PUB_KEY_SIZE);
anon.out_path_len = 0; // default to zero-hop direct
anon.type = ADV_TYPE_NONE; // unknown
anon.lastmod = getRTCClock()->getCurrentTime();
if (addContact(anon)) recipient = &anon;
}
@@ -2216,15 +2220,7 @@ void MyMesh::checkSerialInterface() {
&& !_serial->isWriteBusy() // don't spam the Serial Interface too quickly!
) {
ContactInfo contact;
bool found = false;
while (_iter.hasNext(this, contact)) {
if (contact.type != ADV_TYPE_NONE) {
found = true;
break;
}
}
if (found) {
if (_iter.hasNext(this, contact)) {
if (contact.lastmod > _iter_filter_since) { // apply the 'since' filter
writeContactRespFrame(RESP_CODE_CONTACT, contact);
if (contact.lastmod > _most_recent_lastmod) {
+1
View File
@@ -105,6 +105,7 @@ public:
protected:
float getAirtimeBudgetFactor() const override;
int getInterferenceThreshold() const override;
bool getCADEnabled() const override;
int calcRxDelay(float score, uint32_t air_time) const override;
uint32_t getRetransmitDelay(const mesh::Packet *packet) override;
uint32_t getDirectRetransmitDelay(const mesh::Packet *packet) override;
File diff suppressed because it is too large. Load diff
+3
View File
@@ -206,6 +206,9 @@ protected:
int getInterferenceThreshold() const override {
return _prefs.interference_threshold;
}
bool getCADEnabled() const override {
return _prefs.cad_enabled;
}
int getAGCResetInterval() const override {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
+1
View File
@@ -650,6 +650,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
_prefs.flood_max_unscoped = 64;
_prefs.flood_max_advert = 8;
_prefs.interference_threshold = 0; // disabled
_prefs.cad_enabled = 0; // hardware CAD before TX (off by default; 'set cad on')
#ifdef ROOM_PASSWORD
StrHelper::strncpy(_prefs.guest_password, ROOM_PASSWORD, sizeof(_prefs.guest_password));
#endif
+3
View File
@@ -144,6 +144,9 @@ protected:
int getInterferenceThreshold() const override {
return _prefs.interference_threshold;
}
bool getCADEnabled() const override {
return _prefs.cad_enabled;
}
int getAGCResetInterval() const override {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
+1 -1
View File
@@ -135,7 +135,7 @@ class MyMesh : public BaseChatMesh, ContactVisitor {
File file = _fs->open("/contacts", "w", true);
#endif
if (file) {
ContactsIterator iter;
ContactsIterator iter = startContactsIterator();
ContactInfo c;
uint8_t unused = 0;
uint32_t reserved = 0;
+6
View File
@@ -323,6 +323,9 @@ uint32_t SensorMesh::getDirectRetransmitDelay(const mesh::Packet* packet) {
int SensorMesh::getInterferenceThreshold() const {
return _prefs.interference_threshold;
}
bool SensorMesh::getCADEnabled() const {
return _prefs.cad_enabled;
}
int SensorMesh::getAGCResetInterval() const {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
@@ -726,11 +729,13 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
_prefs.disable_fwd = true;
_prefs.flood_max = 64;
_prefs.interference_threshold = 0; // disabled
_prefs.cad_enabled = 0; // hardware CAD before TX (off by default; 'set cad on')
// GPS defaults
_prefs.gps_enabled = 0;
_prefs.gps_interval = 0;
_prefs.advert_loc_policy = ADVERT_LOC_PREFS;
_prefs.radio_fem_rxgain = 1;
memset(default_scope.key, 0, sizeof(default_scope.key));
}
@@ -766,6 +771,7 @@ void SensorMesh::begin(FILESYSTEM* fs) {
radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
radio_driver.setTxPower(_prefs.tx_power_dbm);
board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
updateAdvertTimer();
updateFloodAdvertTimer();
+1
View File
@@ -120,6 +120,7 @@ protected:
uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
int getInterferenceThreshold() const override;
bool getCADEnabled() const override;
int getAGCResetInterval() const override;
void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
int searchPeersByHash(const uint8_t* hash) override;