Merge remote-tracking branch 'upstream/dev' into HEAD
# Conflicts: # examples/simple_repeater/MyMesh.cpp # src/helpers/BaseChatMesh.cpp # src/helpers/CommonCLI.cpp # src/helpers/CommonCLI.h # variants/heltec_t096/T096Board.cpp # variants/heltec_v4/HeltecV4Board.cpp
This commit is contained in:
commit
166261c73e
21 files changed
+302
-3347
No files matched your search
@@ -780,6 +780,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
---
|
||||
|
||||
#### Enable or disable hardware Channel Activity Detection (CAD)
|
||||
**Usage:**
|
||||
- `get cad`
|
||||
- `set cad <on|off>`
|
||||
|
||||
**Description:** When enabled, the radio performs a hardware Channel Activity Detection scan before transmitting and defers if the channel is busy. Runs independently of `int.thresh` — either, both, or none may be active.
|
||||
|
||||
**Parameters:**
|
||||
- `on|off`: Enable or disable hardware CAD
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the AGC Reset Interval
|
||||
**Usage:**
|
||||
- `get agc.reset.interval`
|
||||
|
||||
Reference in new issue
Block a user