merge: upstream/dev into webconfig (v1.16.0 base -> 2026-07-19)
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files conflicted; resolutions below. Fleet-critical check (Constraint 1): upstream reordered NodePrefs members (rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change /com_prefs. Persistence is written field-by-field at explicit offsets, so member order is in-memory only. Verified the fork's writeCommonPrefsImage() is byte-identical to upstream's inline writer at every offset (79 pad, 121, 122, 290-294). No migration needed. Resolutions: - CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at offset 79 (it is a pad; the field is at 290). - CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted writeCommonPrefsImage() call. - UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off screen, plus the fork's WITH_WEBCONFIG portal/reboot screens. - ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions alongside upstream powerOff/enterDeepSleep and Packet.cpp). - MicroNMEALocationProvider.h: took upstream's claim/release and added the _claims member they depend on. - MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults. - Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled and MyMesh::getCADEnabled(). Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
This commit is contained in:
commit
15e3400a28
206 files changed
+6259
-834
No files matched your search
+40
-14
@@ -366,6 +366,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
|
||||
_prefs->advert_loc_policy = constrain(_prefs->advert_loc_policy, 0, 2);
|
||||
|
||||
_prefs->rx_boosted_gain = constrain(_prefs->rx_boosted_gain, 0, 1); // boolean
|
||||
_prefs->radio_fem_rxgain = constrain(_prefs->radio_fem_rxgain, 0, 1); // boolean
|
||||
_prefs->cad_enabled = constrain(_prefs->cad_enabled, 0, 1); // boolean
|
||||
|
||||
file.close();
|
||||
}
|
||||
@@ -1258,13 +1260,37 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
|
||||
_prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0;
|
||||
savePrefs();
|
||||
strcpy(reply, _prefs->disable_fwd ? "OK - repeat is now OFF" : "OK - repeat is now ON");
|
||||
#if defined(USE_SX1262) || defined(USE_SX1268) || defined(USE_LR1110)
|
||||
} else if (memcmp(config, "radio.rxgain ", 13) == 0) {
|
||||
_prefs->rx_boosted_gain = memcmp(&config[13], "on", 2) == 0;
|
||||
strcpy(reply, "OK");
|
||||
bool enabled = memcmp(&config[13], "on", 2) == 0;
|
||||
_prefs->rx_boosted_gain = enabled;
|
||||
savePrefs();
|
||||
_callbacks->setRxBoostedGain(_prefs->rx_boosted_gain);
|
||||
#endif
|
||||
if (_callbacks->setRxBoostedGain(enabled)) {
|
||||
strcpy(reply, "OK");
|
||||
} else {
|
||||
strcpy(reply, "Error: unsupported");
|
||||
}
|
||||
} else if (memcmp(config, "radio.fem.rxgain ", 17) == 0) {
|
||||
if (!_board->canControlLoRaFemLna()) {
|
||||
strcpy(reply, "Error: unsupported");
|
||||
} else if (memcmp(&config[17], "on", 2) == 0) {
|
||||
if (_board->setLoRaFemLnaEnabled(true)) {
|
||||
_prefs->radio_fem_rxgain = 1;
|
||||
savePrefs();
|
||||
strcpy(reply, "OK - LoRa FEM RX gain on");
|
||||
} else {
|
||||
strcpy(reply, "Error: failed to apply LoRa FEM RX gain");
|
||||
}
|
||||
} else if (memcmp(&config[17], "off", 3) == 0) {
|
||||
if (_board->setLoRaFemLnaEnabled(false)) {
|
||||
_prefs->radio_fem_rxgain = 0;
|
||||
savePrefs();
|
||||
strcpy(reply, "OK - LoRa FEM RX gain off");
|
||||
} else {
|
||||
strcpy(reply, "Error: failed to apply LoRa FEM RX gain");
|
||||
}
|
||||
} else {
|
||||
strcpy(reply, "Error: state must be on or off");
|
||||
}
|
||||
} else if (memcmp(config, "radio ", 6) == 0) {
|
||||
strcpy(tmp, &config[6]);
|
||||
const char *parts[4];
|
||||
@@ -1463,7 +1489,7 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
|
||||
}
|
||||
} else {
|
||||
_prefs->adc_multiplier = 0.0f;
|
||||
strcpy(reply, "Error: unsupported by this board");
|
||||
strcpy(reply, "Error: unsupported");
|
||||
};
|
||||
} else {
|
||||
sprintf(reply, "unknown config: %s", config);
|
||||
@@ -1516,10 +1542,14 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
|
||||
sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lat));
|
||||
} else if (memcmp(config, "lon", 3) == 0) {
|
||||
sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lon));
|
||||
#if defined(USE_SX1262) || defined(USE_SX1268) || defined(USE_LR1110)
|
||||
} else if (memcmp(config, "radio.rxgain", 12) == 0) {
|
||||
sprintf(reply, "> %s", _prefs->rx_boosted_gain ? "on" : "off");
|
||||
#endif
|
||||
} else if (memcmp(config, "radio.fem.rxgain", 16) == 0) {
|
||||
if (!_board->canControlLoRaFemLna()) {
|
||||
strcpy(reply, "Error: unsupported");
|
||||
} else {
|
||||
sprintf(reply, "> %s", _board->isLoRaFemLnaEnabled() ? "on" : "off");
|
||||
}
|
||||
} else if (memcmp(config, "radio", 5) == 0) {
|
||||
char freq[16], bw[16];
|
||||
strcpy(freq, StrHelper::ftoa(_prefs->freq));
|
||||
@@ -1604,12 +1634,12 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
|
||||
strcpy(reply, "> unknown");
|
||||
}
|
||||
#else
|
||||
strcpy(reply, "ERROR: unsupported");
|
||||
strcpy(reply, "Error: unsupported");
|
||||
#endif
|
||||
} else if (memcmp(config, "adc.multiplier", 14) == 0) {
|
||||
float adc_mult = _board->getAdcMultiplier();
|
||||
if (adc_mult == 0.0f) {
|
||||
strcpy(reply, "Error: unsupported by this board");
|
||||
strcpy(reply, "Error: unsupported");
|
||||
} else {
|
||||
sprintf(reply, "> %.3f", adc_mult);
|
||||
}
|
||||
@@ -1627,13 +1657,9 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
|
||||
strcpy(reply, "ERROR: Power management not supported");
|
||||
#endif
|
||||
} else if (memcmp(config, "pwrmgt.bootreason", 17) == 0) {
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
sprintf(reply, "> Reset: %s; Shutdown: %s",
|
||||
_board->getResetReasonString(_board->getResetReason()),
|
||||
_board->getShutdownReasonString(_board->getShutdownReason()));
|
||||
#else
|
||||
strcpy(reply, "ERROR: Power management not supported");
|
||||
#endif
|
||||
} else if (memcmp(config, "pwrmgt.bootmv", 13) == 0) {
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
sprintf(reply, "> %u mV", _board->getBootVoltage());
|
||||
|
||||
Reference in new issue
Block a user