merge: upstream/dev into webconfig (v1.16.0 base -> 2026-07-19)

First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.

Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.

Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
  setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
  report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
  offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
  writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
  screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
  alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
  _claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
  and MyMesh::getCADEnabled().

Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
This commit is contained in:
agessaman committed 2026-07-19 12:41:29 -07:00
commit 15e3400a28
206 files changed
+6259 -834

No files matched your search

+1 -1
View File
@@ -545,7 +545,7 @@ bool DataStore::putBlobByKey(const uint8_t key[], int key_len, const uint8_t src
uint32_t pos = 0, found_pos = 0;
uint32_t min_timestamp = 0xFFFFFFFF;
// search for matching key OR evict by oldest timestmap
// search for matching key OR evict by oldest timestamp
BlobRec tmp;
file.seek(0);
while (file.read((uint8_t *) &tmp, sizeof(tmp)) == sizeof(tmp)) {
+17 -10
View File
@@ -265,6 +265,9 @@ bool MyMesh::getCADEnabled() const {
int MyMesh::getInterferenceThreshold() const {
return 0; // disabled for now, until currentRSSI() problem is resolved
}
bool MyMesh::getCADEnabled() const {
return true; // hardware CAD before TX (no CLI toggle on companion; enabled by default)
}
int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
if (_prefs.rx_delay_base <= 0.0f) return 0;
@@ -658,6 +661,11 @@ uint8_t MyMesh::onContactRequest(const ContactInfo &contact, uint32_t sender_tim
// query other sensors -- target specific
sensors.querySensors(permissions, telemetry);
float temperature = board.getMCUTemperature();
if(!isnan(temperature)) { // Supported boards with built-in temperature sensor. ESP32-C3 may return NAN
telemetry.addTemperature(TELEM_CHANNEL_SELF, temperature); // Built-in MCU Temperature
}
memcpy(reply, &sender_timestamp,
4); // reflect sender_timestamp back in response packet (kind of like a 'tag')
@@ -858,7 +866,7 @@ void MyMesh::onSendTimeout() {}
MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMeshTables &tables, DataStore& store, AbstractUITask* ui)
: BaseChatMesh(radio, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables),
_serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui) {
_serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui), _iter(0) {
_iter_started = false;
_cli_rescue = false;
offline_queue_len = 0;
@@ -1548,6 +1556,7 @@ void MyMesh::handleCmdFrame(size_t len) {
memcpy(anon.id.pub_key, pub_key, PUB_KEY_SIZE);
anon.out_path_len = 0; // default to zero-hop direct
anon.type = ADV_TYPE_NONE; // unknown
anon.lastmod = getRTCClock()->getCurrentTime();
if (addContact(anon)) recipient = &anon;
}
@@ -1642,6 +1651,11 @@ void MyMesh::handleCmdFrame(size_t len) {
} else if (cmd_frame[0] == CMD_SEND_TELEMETRY_REQ && len == 4) { // 'self' telemetry request
telemetry.reset();
telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
float temperature = board.getMCUTemperature();
if(!isnan(temperature)) { // Supported boards with built-in temperature sensor. ESP32-C3 may return NAN
telemetry.addTemperature(TELEM_CHANNEL_SELF, temperature); // Built-in MCU Temperature
}
// query other sensors -- target specific
sensors.querySensors(0xFF, telemetry);
@@ -1987,6 +2001,7 @@ void MyMesh::handleCmdFrame(size_t len) {
sendPacket(pkt, priority, 0);
writeOKFrame();
} else {
releasePacket(pkt);
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
}
} else {
@@ -2192,15 +2207,7 @@ void MyMesh::checkSerialInterface() {
&& !_serial->isWriteBusy() // don't spam the Serial Interface too quickly!
) {
ContactInfo contact;
bool found = false;
while (_iter.hasNext(this, contact)) {
if (contact.type != ADV_TYPE_NONE) {
found = true;
break;
}
}
if (found) {
if (_iter.hasNext(this, contact)) {
if (contact.lastmod > _iter_filter_since) { // apply the 'since' filter
writeContactRespFrame(RESP_CODE_CONTACT, contact);
if (contact.lastmod > _most_recent_lastmod) {
+35 -9
View File
@@ -18,13 +18,13 @@ static uint32_t _atoi(const char* sp) {
#include <CustomLFS_QSPIFlash.h>
DataStore store(InternalFS, QSPIFlash, rtc_clock);
#else
#if defined(EXTRAFS)
#include <CustomLFS.h>
CustomLFS ExtraFS(0xD4000, 0x19000, 128);
DataStore store(InternalFS, ExtraFS, rtc_clock);
#else
DataStore store(InternalFS, rtc_clock);
#endif
#if defined(EXTRAFS)
#include <CustomLFS.h>
CustomLFS ExtraFS(0xD4000, 0x19000, 128);
DataStore store(InternalFS, ExtraFS, rtc_clock);
#else
DataStore store(InternalFS, rtc_clock);
#endif
#endif
#elif defined(RP2040_PLATFORM)
#include <LittleFS.h>
@@ -74,6 +74,9 @@ static uint32_t _atoi(const char* sp) {
#ifdef BLE_PIN_CODE
#include <helpers/nrf52/SerialBLEInterface.h>
SerialBLEInterface serial_interface;
#elif defined(ETHERNET_ENABLED)
#include <helpers/nrf52/SerialEthernetInterface.h>
SerialEthernetInterface serial_interface;
#else
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
@@ -113,9 +116,12 @@ void halt() {
void setup() {
Serial.begin(115200);
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
#ifdef DISPLAY_CLASS
DisplayDriver* disp = NULL;
if (display.begin()) {
@@ -158,10 +164,23 @@ void setup() {
#ifdef BLE_PIN_CODE
serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
the_mesh.startInterface(serial_interface);
#elif defined(ETHERNET_ENABLED)
Serial.print("Waiting for serial to connect...\n");
unsigned long timeout = millis();
while (!Serial) {
if ((millis() - timeout) < 5000) { delay(100); } else { break; }
}
Serial.println("Initializing Ethernet adapter...");
if (serial_interface.begin()) {
the_mesh.startInterface(serial_interface);
} else {
Serial.println("ETH: Init failed, continuing without Ethernet (mesh only)");
}
#else
serial_interface.begin(Serial);
#endif
the_mesh.startInterface(serial_interface);
#endif
#elif defined(RP2040_PLATFORM)
LittleFS.begin();
store.begin();
@@ -249,6 +268,13 @@ void loop() {
ui_task.loop();
#endif
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
#ifdef ETHERNET_ENABLED
serial_interface.loop();
#endif
if (!the_mesh.hasPendingWork()) {
#if defined(NRF52_PLATFORM)
+11 -2
View File
@@ -697,8 +697,7 @@ void UITask::shutdown(bool restart){
if (restart) {
_board->reboot();
} else {
_display->turnOff();
radio_driver.powerOff();
// Power off board including radio, display, GPS and components
_board->powerOff();
}
}
@@ -748,6 +747,16 @@ void UITask::loop() {
c = handleTripleClick(KEY_SELECT);
}
#endif
#if defined(UI_HAS_ROTARY_INPUT)
RotaryInputEvent rotaryEv = rotary_input.poll();
if (c == 0 && _display != NULL && _display->isOn()) {
if (rotaryEv == RotaryInputEvent::Next) {
c = KEY_NEXT;
} else if (rotaryEv == RotaryInputEvent::Prev) {
c = KEY_PREV;
}
}
#endif
#if defined(PIN_USER_BTN_ANA)
if (abs(millis() - _analogue_pin_read_millis) > 10) {
int ev = analog_btn.check();
+1 -1
View File
@@ -307,7 +307,7 @@ void UITask::shutdown(bool restart){
if (restart) {
_board->reboot();
} else {
radio_driver.powerOff();
// Power off board including radio, display, GPS and components
_board->powerOff();
}
}
+1 -2
View File
@@ -566,8 +566,7 @@ void UITask::shutdown(bool restart){
if (restart) {
_board->reboot();
} else {
_display->turnOff();
radio_driver.powerOff();
// Power off board including radio, display, GPS and components
_board->powerOff();
}
}
+5 -8
View File
@@ -606,8 +606,7 @@ uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
return getRNG()->nextInt(0, 5*t + 1);
}
bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
// just try to determine region for packet (apply later in allowPacketForward())
mesh::DispatcherAction MyMesh::onRecvPacket(mesh::Packet* pkt) {
if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
} else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
@@ -619,8 +618,7 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
} else {
recv_pkt_region = NULL;
}
// do normal processing
return false;
return Mesh::onRecvPacket(pkt);
}
void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const mesh::Identity &sender,
@@ -923,6 +921,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
set_radio_at = revert_radio_at = 0;
_logging = false;
region_load_active = false;
recv_pkt_region = NULL;
#if MAX_NEIGHBOURS
memset(neighbours, 0, sizeof(neighbours));
@@ -1217,11 +1216,9 @@ void MyMesh::setTxPower(int8_t power_dbm) {
radio_driver.setTxPower(power_dbm);
}
#if defined(USE_SX1262) || defined(USE_SX1268)
void MyMesh::setRxBoostedGain(bool enable) {
radio_driver.setRxBoostedGainMode(enable);
bool MyMesh::setRxBoostedGain(bool enable) {
return radio_driver.setRxBoostedGainMode(enable);
}
#endif
void MyMesh::formatNeighborsReply(char *reply) {
char *dp = reply;
+3 -4
View File
@@ -200,7 +200,7 @@ protected:
}
#endif
bool filterRecvFloodPacket(mesh::Packet* pkt) override;
mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;
void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
int searchPeersByHash(const uint8_t* hash) override;
@@ -420,7 +420,6 @@ public:
// To check if there is pending work
bool hasPendingWork() const;
#if defined(USE_SX1262) || defined(USE_SX1268)
void setRxBoostedGain(bool enable) override;
#endif
bool setRxBoostedGain(bool enable) override;
};
+53 -27
View File
@@ -1,4 +1,5 @@
#include "UITask.h"
#include "target.h"
#include <Arduino.h>
#include <helpers/CommonCLI.h>
@@ -14,6 +15,8 @@
#define AUTO_OFF_MILLIS 20000 // 20 seconds
#define BOOT_SCREEN_MILLIS 4000 // 4 seconds
#define POWEROFF_DELAY 3000
// 'meshcore', 128x13px
static const uint8_t meshcore_logo [] PROGMEM = {
0x3c, 0x01, 0xe3, 0xff, 0xc7, 0xff, 0x8f, 0x03, 0x87, 0xfe, 0x1f, 0xfe, 0x1f, 0xfe, 0x1f, 0xfe,
@@ -34,9 +37,14 @@ static const uint8_t meshcore_logo [] PROGMEM = {
void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* firmware_version) {
_prevBtnState = HIGH;
_auto_off = millis() + AUTO_OFF_MILLIS;
_started_at = millis();
_node_prefs = node_prefs;
_display->turnOn();
#if defined(PIN_USER_BTN) && defined(DISPLAY_CLASS)
user_btn.begin();
#endif
// strip off dash and commit hash by changing dash to null terminator
// e.g: v1.2.3-abcdef -> v1.2.3
char *version = strdup(firmware_version);
@@ -46,12 +54,13 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
}
// v1.2.3 (1 Jan 2025)
sprintf(_version_info, "%s (%s)", version, build_date);
snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
free(version);
}
void UITask::renderCurrScreen() {
char tmp[80];
if (millis() < BOOT_SCREEN_MILLIS) { // boot screen
if (millis() < _started_at + BOOT_SCREEN_MILLIS) { // boot screen
// meshcore logo
_display->setColor(DisplayDriver::BLUE);
int logoWidth = 128;
@@ -61,22 +70,33 @@ void UITask::renderCurrScreen() {
const char* website = "https://meshcore.io";
_display->setColor(DisplayDriver::LIGHT);
_display->setTextSize(1);
uint16_t websiteWidth = _display->getTextWidth(website);
_display->setCursor((_display->width() - websiteWidth) / 2, 22);
_display->print(website);
_display->drawTextCentered(_display->width() / 2, 22, website);
// version info
_display->setColor(DisplayDriver::LIGHT);
_display->setTextSize(1);
uint16_t versionWidth = _display->getTextWidth(_version_info);
_display->setCursor((_display->width() - versionWidth) / 2, 35);
_display->print(_version_info);
_display->drawTextCentered(_display->width() / 2, 35, _version_info);
// node type
const char* node_type = "< Repeater >";
uint16_t typeWidth = _display->getTextWidth(node_type);
_display->setCursor((_display->width() - typeWidth) / 2, 48);
_display->print(node_type);
_display->drawTextCentered(_display->width() / 2, 48, node_type);
} else if (_powering_off_at > 0) {
// meshcore logo
_display->setColor(DisplayDriver::BLUE);
int logoWidth = 128;
_display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);
// meshcore website
const char* website = "https://meshcore.io";
_display->setColor(DisplayDriver::LIGHT);
_display->setTextSize(1);
_display->drawTextCentered(_display->width()/ 2, 22, website);
// Powering off
const char* poweroff_string = "Turning OFF";
uint16_t poffWidth = _display->getTextWidth(poweroff_string);
_display->setCursor((_display->width() - poffWidth) / 2, 48);
_display->drawTextCentered(_display->width()/2, 48, poweroff_string);
} else { // home screen
#ifdef WITH_WEBCONFIG
if (WebConfigServer::isRebootPending()) {
@@ -115,8 +135,7 @@ void UITask::renderCurrScreen() {
return;
}
#endif
// node name
_display->setCursor(0, 0);
// node name _display->setCursor(0, 0);
_display->setTextSize(1);
_display->setColor(DisplayDriver::GREEN);
_display->print(_node_prefs->node_name);
@@ -146,21 +165,19 @@ void UITask::renderCurrScreen() {
}
void UITask::loop() {
#ifdef PIN_USER_BTN
if (millis() >= _next_read) {
int btnState = digitalRead(PIN_USER_BTN);
if (btnState != _prevBtnState) {
if (btnState == USER_BTN_PRESSED) { // pressed?
if (_display->isOn()) {
// TODO: any action ?
} else {
_display->turnOn();
}
_auto_off = millis() + AUTO_OFF_MILLIS; // extend auto-off timer
}
_prevBtnState = btnState;
#if defined(PIN_USER_BTN) && defined(DISPLAY_CLASS)
int ev = user_btn.check();
if (ev == BUTTON_EVENT_CLICK) {
if (_display->isOn()) {
// TODO: any action ?
} else {
_display->turnOn();
}
_next_read = millis() + 200; // 5 reads per second
_auto_off = millis() + AUTO_OFF_MILLIS; // extend auto-off timer
} else if (ev == BUTTON_EVENT_LONG_PRESS) {
_display->turnOn();
Serial.println("Powering Off");
_powering_off_at = millis() + POWEROFF_DELAY;
}
#endif
@@ -185,4 +202,13 @@ void UITask::loop() {
_display->turnOff();
}
}
if (_powering_off_at > 0) { // power off timer armed
#ifdef LED_PIN
digitalWrite(LED_PIN, LED_STATE_ON); // switch on the led until poweroff
#endif
if (millis() > _powering_off_at) {
_board->powerOff(); // should not return
}
}
}
+4 -1
View File
@@ -4,15 +4,18 @@
#include <helpers/CommonCLI.h>
class UITask {
mesh::MainBoard* _board;
DisplayDriver* _display;
unsigned long _next_read, _next_refresh, _auto_off;
int _prevBtnState;
NodePrefs* _node_prefs;
char _version_info[32];
unsigned long _powering_off_at = 0;
unsigned long _started_at = 0;
void renderCurrScreen();
public:
UITask(DisplayDriver& display) : _display(&display) { _next_read = _next_refresh = 0; }
UITask(mesh::MainBoard& board, DisplayDriver& display) : _board(&board), _display(&display) { _next_read = _next_refresh = 0; }
void begin(NodePrefs* node_prefs, const char* build_date, const char* firmware_version);
void loop();
+45 -2
View File
@@ -5,7 +5,12 @@
#ifdef DISPLAY_CLASS
#include "UITask.h"
static UITask ui_task(display);
static UITask ui_task(board, display);
#endif
#ifdef ETHERNET_ENABLED
#define ETHERNET_CLI_BANNER "MeshCore Repeater CLI"
#include <helpers/nrf52/EthernetCLI.h>
#endif
StdRNG fast_rng;
@@ -18,6 +23,9 @@ void halt() {
}
static char command[160];
#ifdef ETHERNET_ENABLED
static char ethernet_command[160];
#endif
// For power saving
unsigned long POWERSAVING_FIRSTSLEEP_SECS = 120; // The first sleep (if enabled) from boot
@@ -33,6 +41,10 @@ void setup() {
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
#if defined(MESH_DEBUG) && defined(NRF52_PLATFORM)
// give some extra time for serial to settle so
// boot debug messages can be seen on terminal
@@ -91,6 +103,9 @@ void setup() {
mesh::Utils::printHex(Serial, the_mesh.self_id.pub_key, PUB_KEY_SIZE); Serial.println();
command[0] = 0;
#ifdef ETHERNET_ENABLED
ethernet_command[0] = 0;
#endif
sensors.begin();
@@ -100,6 +115,10 @@ void setup() {
ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
#endif
#ifdef ETHERNET_ENABLED
ethernet_start_task();
#endif
// send out initial zero hop Advertisement to the mesh
#if ENABLE_ADVERT_ON_BOOT == 1
the_mesh.sendSelfAdvertisement(16000, false);
@@ -109,6 +128,7 @@ void setup() {
}
void loop() {
// Handle Serial CLI
int len = strlen(command);
while (Serial.available() && len < sizeof(command)-1) {
char c = Serial.read();
@@ -127,7 +147,14 @@ void loop() {
Serial.print('\n');
command[len - 1] = 0; // replace newline with C string null terminator
char reply[160];
reply[0] = 0;
#ifdef ETHERNET_ENABLED
if (!ethernet_handle_command(command, reply)) {
the_mesh.handleCommand(0, command, reply);
}
#else
the_mesh.handleCommand(0, command, reply); // NOTE: there is no sender_timestamp via serial!
#endif
if (reply[0]) {
Serial.print(" -> "); Serial.println(reply);
}
@@ -135,7 +162,20 @@ void loop() {
command[0] = 0; // reset command buffer
}
#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_)
#ifdef ETHERNET_ENABLED
ethernet_loop_maintain();
if (ethernet_read_line(ethernet_command, sizeof(ethernet_command))) {
char reply[160];
reply[0] = 0;
if (!ethernet_handle_command(ethernet_command, reply)) {
the_mesh.handleCommand(0, ethernet_command, reply);
}
ethernet_send_reply(reply);
ethernet_command[0] = 0;
}
#endif
#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_) && !defined(DISPLAY_CLASS)
// Hold the user button to power off the SenseCAP Solar repeater.
int btnState = digitalRead(PIN_USER_BTN);
if (btnState == LOW) {
@@ -157,6 +197,9 @@ void loop() {
#endif
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
if (the_mesh.getNodePrefs()->powersaving_enabled && !the_mesh.hasPendingWork()) {
#if defined(NRF52_PLATFORM)
board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
+4 -4
View File
@@ -310,8 +310,7 @@ bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
return true;
}
bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
// just try to determine region for packet (apply later in allowPacketForward())
mesh::DispatcherAction MyMesh::onRecvPacket(mesh::Packet* pkt) {
if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
} else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
@@ -323,8 +322,7 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
} else {
recv_pkt_region = NULL;
}
// do normal processing
return false;
return Mesh::onRecvPacket(pkt);
}
void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const mesh::Identity &sender,
@@ -650,6 +648,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
_logging = false;
region_load_active = false;
set_radio_at = revert_radio_at = 0;
recv_pkt_region = NULL;
// defaults
memset(&_prefs, 0, sizeof(_prefs));
@@ -683,6 +682,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
_prefs.gps_enabled = 0;
_prefs.gps_interval = 0;
_prefs.advert_loc_policy = ADVERT_LOC_PREFS;
_prefs.radio_fem_rxgain = 1;
// Observer defaults (alert.*, etc.) moved to applyMQTTDefaults() — they live
// in /mqtt_prefs now, not NodePrefs.
+4 -1
View File
@@ -171,6 +171,9 @@ protected:
int getInterferenceThreshold() const override {
return _prefs.interference_threshold;
}
bool getCADEnabled() const override {
return _prefs.cad_enabled;
}
int getAGCResetInterval() const override {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
@@ -178,7 +181,7 @@ protected:
return _prefs.multi_acks;
}
bool filterRecvFloodPacket(mesh::Packet* pkt) override;
mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;
bool allowPacketForward(const mesh::Packet* packet) override;
void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
+2 -1
View File
@@ -46,7 +46,8 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
}
// v1.2.3 (1 Jan 2025)
sprintf(_version_info, "%s (%s)", version, build_date);
snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
free(version);
}
void UITask::renderCurrScreen() {
+42
View File
@@ -3,6 +3,11 @@
#include "MyMesh.h"
#ifdef ETHERNET_ENABLED
#define ETHERNET_CLI_BANNER "MeshCore Room Server CLI"
#include <helpers/nrf52/EthernetCLI.h>
#endif
#ifdef DISPLAY_CLASS
#include "UITask.h"
static UITask ui_task(display);
@@ -17,6 +22,9 @@ void halt() {
}
static char command[MAX_POST_TEXT_LEN+1];
#ifdef ETHERNET_ENABLED
static char ethernet_command[MAX_POST_TEXT_LEN+1];
#endif
void setup() {
Serial.begin(115200);
@@ -24,6 +32,10 @@ void setup() {
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
#ifdef DISPLAY_CLASS
if (display.begin()) {
display.startFrame();
@@ -67,6 +79,9 @@ void setup() {
mesh::Utils::printHex(Serial, the_mesh.self_id.pub_key, PUB_KEY_SIZE); Serial.println();
command[0] = 0;
#ifdef ETHERNET_ENABLED
ethernet_command[0] = 0;
#endif
sensors.begin();
@@ -76,6 +91,10 @@ void setup() {
ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
#endif
#ifdef ETHERNET_ENABLED
ethernet_start_task();
#endif
// send out initial zero hop Advertisement to the mesh
#if ENABLE_ADVERT_ON_BOOT == 1
the_mesh.sendSelfAdvertisement(16000, false);
@@ -101,7 +120,14 @@ void loop() {
if (len > 0 && command[len - 1] == '\r') { // received complete line
command[len - 1] = 0; // replace newline with C string null terminator
char reply[160];
reply[0] = 0;
#ifdef ETHERNET_ENABLED
if (!ethernet_handle_command(command, reply)) {
the_mesh.handleCommand(0, command, reply);
}
#else
the_mesh.handleCommand(0, command, reply); // NOTE: there is no sender_timestamp via serial!
#endif
if (reply[0]) {
Serial.print(" -> "); Serial.println(reply);
}
@@ -109,10 +135,26 @@ void loop() {
command[0] = 0; // reset command buffer
}
#ifdef ETHERNET_ENABLED
ethernet_loop_maintain();
if (ethernet_read_line(ethernet_command, sizeof(ethernet_command))) {
char reply[160];
reply[0] = 0;
if (!ethernet_handle_command(ethernet_command, reply)) {
the_mesh.handleCommand(0, ethernet_command, reply);
}
ethernet_send_reply(reply);
ethernet_command[0] = 0;
}
#endif
the_mesh.loop();
sensors.loop();
#ifdef DISPLAY_CLASS
ui_task.loop();
#endif
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
}
+8 -1
View File
@@ -135,7 +135,7 @@ class MyMesh : public BaseChatMesh, ContactVisitor {
File file = _fs->open("/contacts", "w", true);
#endif
if (file) {
ContactsIterator iter;
ContactsIterator iter = startContactsIterator();
ContactInfo c;
uint8_t unused = 0;
uint32_t reserved = 0;
@@ -560,6 +560,10 @@ void setup() {
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
if (!radio_init()) { halt(); }
fast_rng.begin(radio_driver.getRngSeed());
@@ -591,4 +595,7 @@ void setup() {
void loop() {
the_mesh.loop();
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
}
+4
View File
@@ -327,6 +327,9 @@ uint32_t SensorMesh::getDirectRetransmitDelay(const mesh::Packet* packet) {
int SensorMesh::getInterferenceThreshold() const {
return _prefs.interference_threshold;
}
bool SensorMesh::getCADEnabled() const {
return _prefs.cad_enabled;
}
int SensorMesh::getAGCResetInterval() const {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
@@ -737,6 +740,7 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
_prefs.gps_enabled = 0;
_prefs.gps_interval = 0;
_prefs.advert_loc_policy = ADVERT_LOC_PREFS;
_prefs.radio_fem_rxgain = 1;
memset(default_scope.key, 0, sizeof(default_scope.key));
}
+2 -1
View File
@@ -41,7 +41,8 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
}
// v1.2.3 (1 Jan 2025)
sprintf(_version_info, "%s (%s)", version, build_date);
snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
free(version);
}
void UITask::renderCurrScreen() {
+7
View File
@@ -58,6 +58,10 @@ void setup() {
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
#ifdef DISPLAY_CLASS
if (display.begin()) {
display.startFrame();
@@ -147,4 +151,7 @@ void loop() {
ui_task.loop();
#endif
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
}