Add two-profile LoRa operation and radio CLI regression coverage

Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.

Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.

Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.

Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.

docs/cli_commands.md

@@ -1,5 +1,8 @@
 # CLI Commands
 
+See [two LoRa profiles](radio_profiles.md) for `radio2`, `tempradio2`, scheduling,
+RX-only mode, cross-transmission policy, and optional radio preambles.
+
 For copy/paste on/off recipes and the differences from Full Companion, see
 [feature switches by role](role_feature_switches.md). The
 [USB web console](https://flasher.meshcore.io/console) opens the default ASCII
@@ -2026,6 +2029,11 @@ The pin number is the Arduino pin number used by that target (the normal GPIO nu
 ---
 
 #### View or change this node's advert path hash size
+**1.17.1.5 infrastructure bug:** affected Repeater, Room Server, and Sensor
+images accept `get path.hash.mode` but report `unknown config` for the setter.
+The command was not renamed. The source correction restores the setter;
+installed images need an updated build. See the [setting-dispatch audit](cli_settings_audit.md).
+
 **Usage:**
 - `get path.hash.mode`
 - `set path.hash.mode <value>`